From: Leroy Eckert
Subject: RE: [WanderlodgeForum] Pyrometer
To: WanderlodgeForum@yahoogroups.com
Date: Wednesday, February 4, 2009, 6:00 PM

I do not have the schematic of the circuit. I would bet the placement of the probe location was predetermined to fit the normal temperatures published in the manual. I would imagine the closer the probe is the turbo outlet the hotter the reading and visa versa. Leroy Eckert 1990 WB-40 Smoke N Mirrors Dahlonega, GA Royale Conversion --- On Wed, 2/4/09, Donald Watson wrote: From: Donald Watson Subject: RE: [WanderlodgeForum] Pyrometer To: WanderlodgeForum@ yahoogroups. com Date: Wednesday, February 4, 2009, 5:01 PM Bill, The wire length should not be predetermined as far as I know. The thermocouple acts as a probe and produces a small signal measured in millivolts, sometimes amplified depending on the pyrometer gauge circuitry. Obviously, sound electrical connections are important. Donn 76 FC 33 South Kingstown, RI From: WanderlodgeForum@ yahoogroups. com [mailto:WanderlodgeForum@ yahoogroups. com] On Behalf Of Wilhelmus Schreurs Sent: Wednesday, February 04, 2009 11:57 AM To: fc_wanderlodge@ yahoogroups. com; wanderlodgeforum@ yahoogroups. com Subject: [WanderlodgeForum] Pyrometer I have been trying to find some info on the pyrometer circuit. The question I have is: Is the length of wire predetermined on this gauge? Bill 84 FC 35 SB "$quanderlodge" Terrace, B.C. Canada