+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: Removeable Dinnet Table (/showthread.php?tid=447)
Pages: 1 2
Removeable Dinnet Table - Tom Seitz - 04-30-2005 13:58
Royal,Ron,Mark and all thanks for your help.I checked west m. and
they didnt have anything in stock. But it gave me enough ideas to
get the job done.i worked on it most of the day and now I just pull
two scews and the table comes out.I built a new drop in platform and
new cushions for the bed and im ready to go.the only problem I have
is the added storage needed for the extra cushions.Thanks again
guys, I now have an SP that sleeps 7 with nobody on the floor.2 in
the rear,two in the booth,2 on the front sofa,and one baby crib in
the closet.The next modification will be bunkbeds in the closet
HAHA. That will make 8. Headed for Disney World with the whole gange.
Tom 90 SP36 Alpharetta GA
--- In WanderlodgeForum@yahoogroups.com, "mw88fc" <mw88fc@y...>
wrote:
>
>
> I will be interested in your progress on this.
> I have an 88fc with a very heavy corian top. I would like to do
this conversion as well.
>
> I am wondering if I need a new table and cushions...because.....
>
> I took apart this table top once to notice tha tit would need mods
to work the way the
> book shows. It wont just sit on the base. I would need to build a
wood piece for it to
> rest on.
>
> I dont know about yours but my table isnt a rectange ...its
tapered in at both ends.
> Also, my cushions are thicker on the seat that the backrest...the
only thing similar to
> the book is the way the cushions detach.
>
> If you dont find hardware you like at camping world.(i didnt see
any when i was there)
>
> ..I would try west marine...or a similar marine shop. This is a
very common feature on
> sailboats. ...SoI was thinking there might be some nicer options
> for boats...I f i find a solition I will pass it on as well.
>
> Thanks
>
> Mark Walk
> 88fc
> socal
>
> --- In WanderlodgeForum@yahoogroups.com, "Tom Seitz"
> > Does anybody know where I can find a base plate(ring that mounts
to
> > the floor)and the removeable post or a dinnet table. Im trying
to get
> > a foldable table so I can gain anouther bed in my SP .
> > Thanks Tom 90 SP36 Alpharetta GA
Removeable Dinnet Table - Tom Seitz - 04-30-2005 14:14
Mark, I just sent you a email message if you would like to give me a
call. Tom 90 SP36 Alpharetta GA
--- In WanderlodgeForum@yahoogroups.com, "mw88fc" <mw88fc@y...>
wrote:
> Earnie,
> I am not sure if my dinette table is an original design, but it
provides extra room by
> tapering in at both ends.
>
> the end by the window is attached to the wall with angle
>
> and one small leg on the isle side with a small piece of metal
creating a 45 from the
> leg tounder the table.....i will upload a pic in am mwfc88 folder
and anounce it
> when i get my cam back in the bus.
>
> I love the table design...but wish it were a bed.....any ideas on
this apreciated.
>
>
>
> Also what was the bulb price at west marine?
>
> --- In WanderlodgeForum@yahoogroups.com, erniecarpet@a... wrote:
> > Hi Gregg, good to hear from you. No, we like the dining table. i
wish it was
> > a little smaller, or I need to lose weight? The forum is off and
running and
> > with our team, I couldn't be any prouder. Good things are yet to
come. hey-
> > come on down, especially when its real hot and help me spin my
electric meter!!
> > Ernie-83PT40 in Texas, where it has been told that it
gets "warm" here
> >
> >
> > [Non-text portions of this message have been removed]
Removeable Dinnet Table - erniecarpet@... - 04-30-2005 19:50
Mark, Tom Warner found the bulbs at a better price at
:http://www.atlantalightbulbs.com/ Ernie-83PT40 in Texas, all lites on, I can
see!
[Non-text portions of this message have been removed]