![]() |
Convection/Microwave - Printable Version +- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com) +-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61) +--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63) +--- Thread: Convection/Microwave (/showthread.php?tid=7606) Pages: 1 2 |
Convection/Microwave - Dorn Hetzel - 01-26-2009 13:50 Do those sharps have a flat stainless bottom to cope with being mounted in the heat over the stove? Dorn Hetzel 77FC35 Hogansville, GA On Mon, Jan 26, 2009 at 5:58 PM, Henry Jay Hannigan <"hank_87us@yahoo.com"> wrote:
Convection/Microwave - ronmarabito2002 - 01-26-2009 16:36 Purchase the model with the exhaust fan and lights in the bottom. Jenn-Air also makes a model that fits well. It mounts differently though. R.E. (Ron) Marabito, Dallas, TX 92WB40 --- In WanderlodgeForum@yahoogroups.com, Dorn Hetzel > > Do those sharps have a flat stainless bottom to cope with being mounted in > the heat over the stove? > > Dorn Hetzel > 77FC35 > Hogansville, GA > > On Mon, Jan 26, 2009 at 5:58 PM, Henry Jay Hannigan > > > ---I replaced mine with a Stainless Sharp also like Leroy but ALL > > BLACK and $80 less would have been OK because only a small amount of > > side stainless shows......Sharp is very good. > > Regards, > > Hank Hannigan in Melbourne down under for summer > > 90SP36 Istored in Vegas) > > > > In WanderlodgeForum@yahoogroups.com > > Leroy Eckert > > wrote: > > > > > > > > My 15 year old Sharp failed and I replaced it with an new Stainless > > Sharp, about $500 at the time. The new one is miles ahead of the old > > one in efficiency according to the wife. > > > Leroy Eckert > > > 1990 WB-40 Smoke N Mirrors > > > Dahlonega, GA > > > Royale Conversion > > > > > > --- On Sun, 1/25/09, jburgessx2 > > > From: jburgessx2 > > > > > Subject: [WanderlodgeForum] Re: Convection/Microwave > > > To: WanderlodgeForum@yahoogroups.com > > > Date: Sunday, January 25, 2009, 6:40 PM > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Jay, > > > > > > > > > > > > That's good to know. I know I had a Sharp in my Beaver and it was > > a > > > > > > top notch microwave/convectio n oven and still runs strong today > > after > > > > > > 20+ years. > > > > > > > > > > > > Jerry > > > > > > 1985 PT 40 > > > > > > > > > > > > --- In WanderlodgeForum@ yahoogroups. com, "Jay Darst" > > > > > > > > wrote: > > > > > > > > > > > > > > I replaced my Sharp with a Dacor DCM24S. > > > > > > > > > > > > > > Fits nicely, needed a 1/2" shim(plywood with hardwood trim pc to > > > > > > look > > > > > > > like the rest of the Bird) > > > > > > > > > > > > > > Works great. Dam near all convection/microwav es are made by > > SHARP. > > > > > > So > > > > > > > don't blow a bunch of money on DACOR or VIKING, they are made by > > > > > > > SHARP. > > > > > > > > > > > > > > Of course I didn't learn that until I had bought the DACOR($850) > > > > > > for > > > > > > > the Bird and VIKING($1,500) for the house. They are the same > > except > > > > > > > the hood ornament.... Daaa..... Live and learn > > > > > > > > > > > > > > Jay Darst > > > > > > > 85PT40 > > > > > > > 91Prevost Royale 40XL for sale > > > > > > > Sullivan, IL > > > > > > > > > > > > > > --- In WanderlodgeForum@ yahoogroups. com, "jburgessx2" > > > > > > > > > > > > > > > > > > > > > > > Ralph, > > > > > > > > > > > > > > > > Thanks a bunch. I really like this old Bird and I want to get > > it > > > > > > > > back into shape. We full time and can't live without the > > oven. > > > > > > I > > > > > > > > appreciate your help! > > > > > > > > > > > > > > > > Jerry > > > > > > > > 1985 PT40 > > > > > > > > > > > > > > > > --- In WanderlodgeForum@ yahoogroups. com, "Ralph L. > > Fullenwider" > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Jerry and congrats on your Bird. > > > > > > > > > > > > > > > > > > Check out the Sharp 930 convection/microwav e it is 18.8 > > deep, > > > > > > > 14.9 > > > > > > > > high and > > > > > > > > > 25 wide and fits like a glove, and a good unit. > > > > > > > > > > > > > > > > > > Safe travels, > > > > > > > > > > > > > > > > > > Ralph and Charolette Fullenwider > > > > > > > > > 84FC35 "Ruff Diamond" > > > > > > > > > Duncan, Oklahoma > > > > > > > > > > > > > > > > > > At 04:13 PM 1/25/2009 +0000, you wrote: > > > > > > > > > >I've just purchased my first Bird and am looking for some > > > > > > help. > > > > > > > > The > > > > > > > > > >original microwave/convectio n oven was broken so the > > previous > > > > > > > owner > > > > > > > > > >installed just a microwave in it's place. I would like to > > > > > > have > > > > > > > the > > > > > > > > > >convection portion back because there isn't any other oven > > > > > > > > installed. > > > > > > > > > >I like my baked goods and the wife want's her oven back! > > > > > > > > > > > > > > > > > > > >Has anyone else had this problem? What model/brand > > > > > > > > > >microwave/convecti on oven will fit in the original hole on > > a > > > > > > 1985 > > > > > > > > > >PT40? Any help would be greatly appreciated. > > > > > > > > > > > > > > > > > > > >If no one knows, I can always do the measurements and search > > > > > > > > myself. > > > > > > > > > >But, I thought someone may have already been down this road. > > > > > > > > > > > > > > > > > > > >Thanks. Jerry > > > > > > > > > >1985 PT40 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Convection/Microwave - jburgessx2 - 02-06-2009 12:18 Ralph, I did buy the Sharp you recommended and it does fit quite nicely. And, it looks good with the black color. I thought about the stainless but it was about $80 more and someone posted and said not much showed anyways (they were right). Thanks again for the suggestion. You certainly saved me a bunch of time and effort searching for something that fit near perfect. Jerry 85 PT40 --- In WanderlodgeForum@yahoogroups.com, "Ralph L. Fullenwider" > > Hi Jerry and congrats on your Bird. > > Check out the Sharp 930 convection/microwave it is 18.8 deep, 14.9 high and > 25 wide and fits like a glove, and a good unit. > > Safe travels, > > Ralph and Charolette Fullenwider > 84FC35 "Ruff Diamond" > Duncan, Oklahoma > > At 04:13 PM 1/25/2009 +0000, you wrote: > >I've just purchased my first Bird and am looking for some help. The > >original microwave/convection oven was broken so the previous owner > >installed just a microwave in it's place. I would like to have the > >convection portion back because there isn't any other oven installed. > >I like my baked goods and the wife want's her oven back! > > > >Has anyone else had this problem? What model/brand > >microwave/convection oven will fit in the original hole on a 1985 > >PT40? Any help would be greatly appreciated. > > > >If no one knows, I can always do the measurements and search myself. > >But, I thought someone may have already been down this road. > > > >Thanks. Jerry > >1985 PT40 > > > > > Convection/Microwave - pattypape - 02-06-2009 13:03 Does any of the big box stores stock this Microwave??? Most seem to be a special order and shipping Bill 88 FC Michigan --- In WanderlodgeForum@yahoogroups.com, "jburgessx2" > > Ralph, > > I did buy the Sharp you recommended and it does fit quite nicely. > And, it looks good with the black color. I thought about the > stainless but it was about $80 more and someone posted and said not > much showed anyways (they were right). > > Thanks again for the suggestion. You certainly saved me a bunch of > time and effort searching for something that fit near perfect. > > Jerry > 85 PT40 > > --- In WanderlodgeForum@yahoogroups.com, "Ralph L. Fullenwider" > > > > > Hi Jerry and congrats on your Bird. > > > > Check out the Sharp 930 convection/microwave it is 18.8 deep, 14.9 > high and > > 25 wide and fits like a glove, and a good unit. > > > > Safe travels, > > > > Ralph and Charolette Fullenwider > > 84FC35 "Ruff Diamond" > > Duncan, Oklahoma > > > > At 04:13 PM 1/25/2009 +0000, you wrote: > > >I've just purchased my first Bird and am looking for some help. > The > > >original microwave/convection oven was broken so the previous owner > > >installed just a microwave in it's place. I would like to have the > > >convection portion back because there isn't any other oven > installed. > > >I like my baked goods and the wife want's her oven back! > > > > > >Has anyone else had this problem? What model/brand > > >microwave/convection oven will fit in the original hole on a 1985 > > >PT40? Any help would be greatly appreciated. > > > > > >If no one knows, I can always do the measurements and search > myself. > > >But, I thought someone may have already been down this road. > > > > > >Thanks. Jerry > > >1985 PT40 > > > > > > > > > Convection/Microwave - jburgessx2 - 02-06-2009 13:10 Bill, I couldn't find it locally at any of the stores. I ended up ordering it online at a place called Etronics. I think I paid about $411 which included shipping. It does fit nicely in the existing space. Jerry 85 PT40 --- In WanderlodgeForum@yahoogroups.com, "pattypape" wrote: > > > Does any of the big box stores stock this Microwave??? > > Most seem to be a special order and shipping > > Bill 88 FC Michigan > > > > --- In WanderlodgeForum@yahoogroups.com, "jburgessx2" > > > > > Ralph, > > > > I did buy the Sharp you recommended and it does fit quite nicely. > > And, it looks good with the black color. I thought about the > > stainless but it was about $80 more and someone posted and said not > > much showed anyways (they were right). > > > > Thanks again for the suggestion. You certainly saved me a bunch of > > time and effort searching for something that fit near perfect. > > > > Jerry > > 85 PT40 > > > > --- In WanderlodgeForum@yahoogroups.com, "Ralph L. Fullenwider" > > > > > > > > Hi Jerry and congrats on your Bird. > > > > > > Check out the Sharp 930 convection/microwave it is 18.8 deep, > 14.9 > > high and > > > 25 wide and fits like a glove, and a good unit. > > > > > > Safe travels, > > > > > > Ralph and Charolette Fullenwider > > > 84FC35 "Ruff Diamond" > > > Duncan, Oklahoma > > > > > > At 04:13 PM 1/25/2009 +0000, you wrote: > > > >I've just purchased my first Bird and am looking for some help. > > The > > > >original microwave/convection oven was broken so the previous > owner > > > >installed just a microwave in it's place. I would like to have > the > > > >convection portion back because there isn't any other oven > > installed. > > > >I like my baked goods and the wife want's her oven back! > > > > > > > >Has anyone else had this problem? What model/brand > > > >microwave/convection oven will fit in the original hole on a 1985 > > > >PT40? Any help would be greatly appreciated. > > > > > > > >If no one knows, I can always do the measurements and search > > myself. > > > >But, I thought someone may have already been down this road. > > > > > > > >Thanks. Jerry > > > >1985 PT40 > > > > > > > > > > > > > > Convection/Microwave - Ralph L. Fullenwider - 02-06-2009 15:10 Jerry, am glad it worked out for you. I have seen that unit installed and it does look good. The actual ground work was done by a member of this Forum, Mike McMahan in Waco, Tx and I just passed the findings on to you. Safe travels, Ralph and Charolette Fullenwider 84FC35 "Ruff Diamond" Duncan, Oklahoma At 12:18 AM 2/7/2009 +0000, you wrote: >Ralph, > >I did buy the Sharp you recommended and it does fit quite nicely. >And, it looks good with the black color. I thought about the >stainless but it was about $80 more and someone posted and said not >much showed anyways (they were right). > >Thanks again for the suggestion. You certainly saved me a bunch of >time and effort searching for something that fit near perfect. > >Jerry >85 PT40 > >--- In WanderlodgeForum@yahoogroups.com, "Ralph L. Fullenwider" > > > > > Hi Jerry and congrats on your Bird. > > > > Check out the Sharp 930 convection/microwave it is 18.8 deep, 14.9 >high and > > 25 wide and fits like a glove, and a good unit. > > > > Safe travels, > > > > Ralph and Charolette Fullenwider > > 84FC35 "Ruff Diamond" > > Duncan, Oklahoma > > > > At 04:13 PM 1/25/2009 +0000, you wrote: > > >I've just purchased my first Bird and am looking for some help. >The > > >original microwave/convection oven was broken so the previous owner > > >installed just a microwave in it's place. I would like to have the > > >convection portion back because there isn't any other oven >installed. > > >I like my baked goods and the wife want's her oven back! > > > > > >Has anyone else had this problem? What model/brand > > >microwave/convection oven will fit in the original hole on a 1985 > > >PT40? Any help would be greatly appreciated. > > > > > >If no one knows, I can always do the measurements and search >myself. > > >But, I thought someone may have already been down this road. > > > > > >Thanks. Jerry > > >1985 PT40 > > > > > > > > > Convection/Microwave - birdshill123 - 02-06-2009 15:26 Bill: I checked with Home Depot, Lowes, Best Buy and Sears. None have it in stock but a few said they could order. I have a feeling that the units are no longer being mfrd. and that is why it is available only online. I too found that Etronic price. I will be ordering one very soon. Bruce 1988 FC35 |