Wanderlodge Gurus - The Member Funded Wanderlodge Forum
Mirror set screws - Printable Version

+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: Mirror set screws (/showthread.php?tid=7999)

Pages: 1 2

Mirror set screws - Jerry Burgess - 04-27-2009 11:37

John,
So, are these also the ones with the defrost? If so, I might be interested in a set since my mirrors are starting to deteriorate as well.
Jerry
85 PT40


From: "jvredden@..."
To: WanderlodgeForum@yahoogroups.com
Sent: Monday, April 27, 2009 1:34:54 PM
Subject: Re: [WanderlodgeForum] Mirror set screws




Yes
John Redden
91 PT 40
NC


Sent from my BlackBerry® smartphone with SprintSpeed




From: Ernie Ekberg
Date: Mon, 27 Apr 2009 13:24:05 -0700 (PDT)
To:
Subject: Re: [WanderlodgeForum] Mirror set screws






Are these the mirrors with the BB logo on them?


Ernie Ekberg
83PT40
Wanderlodge
Weatherford, Tx

--- On Mon, 4/27/09, jvredden@aol. com wrote:

From: jvredden@aol. com
Subject: Re: [WanderlodgeForum] Mirror set screws
To: WanderlodgeForum@ yahoogroups. com
Date: Monday, April 27, 2009, 3:10 PM


I bought a set of BB mirrors at FMCA for $150.00. Some guy had a bunch. I can call a friend and see if more are available.

John Redden
91 PT 40
NC
Sent from my BlackBerry® smartphone with SprintSpeed
From: "jburgessx2"
Date: Sun, 26 Apr 2009 23:44:33 -0000
To:
Subject: [WanderlodgeForum] Mirror set screws

So, has anyone had to do battle with the set screws on their mirrors? The PO had the mirrors set to his specifications and it serves my purposes for the most part. But, I wanted to tweak them and was unable to loosen hex screws on the bottom or side. I sprayed the set screws with PB Blaster and let it set overnight. I put a breaker bar on the hex key and was still unable to budge them.

Any thoughts????

Jerry
85 PT40



Mirror set screws - GARY MINKER - 04-30-2009 23:24

The best mechanic trick is to PB them, let them sit, warm the knuckle to about 120 degrees gently, let it cool completely, repeat 2 to 3 times then tighten first, then loosen. Gentle persuasion with a SMALL impact wrench forward then backward may help to vibrate the capillary action of the PB.
Gary

--- On Mon, 4/27/09, jvredden@... wrote:
From: jvredden@...
Subject: Re: [WanderlodgeForum] Mirror set screws
To: WanderlodgeForum@yahoogroups.com
Date: Monday, April 27, 2009, 4:10 PM




I bought a set of BB mirrors at FMCA for $150.00. Some guy had a bunch. I can call a friend and see if more are available.

John Redden
91 PT 40
NC


Sent from my BlackBerry® smartphone with SprintSpeed


From: "jburgessx2"
Date: Sun, 26 Apr 2009 23:44:33 -0000
To:
Subject: [WanderlodgeForum] Mirror set screws



So, has anyone had to do battle with the set screws on their mirrors? The PO had the mirrors set to his specifications and it serves my purposes for the most part. But, I wanted to tweak them and was unable to loosen hex screws on the bottom or side. I sprayed the set screws with PB Blaster and let it set overnight. I put a breaker bar on the hex key and was still unable to budge them.

Any thoughts????


Jerry
85 PT40