+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Sandbox (/forumdisplay.php?fid=6)
+--- Forum: Tools (/forumdisplay.php?fid=16)
+--- Thread: Alternative to VMSPC (/showthread.php?tid=101)
RE: Alternative to VMSPC - Ray Davis - 03-04-2013 19:08
(03-02-2013 12:00)pgchin Wrote: Ray,
1) It's a Deustch Diagnostic connector PN HD10-6-96P
2) Diagnostic Pins (4 wires used)
B-goes to c1 on the ECM connector
A- goes to c2 on the ECM connector
C- goes to b3 on the ECM connector
E- black ground goes to black ground in the power harness connector
Pete,
This sounds correct. A and B are the data pins, C is 12v power, and E is ground. Sounds like you are perfectly setup.
Send me a note to ray@rvtechtools.com, we'll take this offline, and we can get you a unit, when you're ready.
Ray
RE: Alternative to VMSPC - pgchin - 03-12-2013 15:41
(03-04-2013 19:08)Ray Davis Wrote:(03-02-2013 12:00)pgchin Wrote: Ray,
1) It's a Deustch Diagnostic connector PN HD10-6-96P
2) Diagnostic Pins (4 wires used)
B-goes to c1 on the ECM connector
A- goes to c2 on the ECM connector
C- goes to b3 on the ECM connector
E- black ground goes to black ground in the power harness connector
Pete,
This sounds correct. A and B are the data pins, C is 12v power, and E is ground. Sounds like you are perfectly setup.
Send me a note to ray@rvtechtools.com, we'll take this offline, and we can get you a unit, when you're ready.
Ray
Hi Ray,
Congrats on being a first time Grand Pa! Needles to say, I'm sure you are walking on clouds.......FYI When you get a chance, check your email on rvtech tools, email from me
It might be in your "span" folder.... I have a yahoo ID, thanks! PM here if you did not get it, thanks!