![]() |
cool a matic fan - Printable Version +- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com) +-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61) +--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63) +--- Thread: cool a matic fan (/showthread.php?tid=5057) |
cool a matic fan - williamcharrison - 06-04-2007 08:27 They only give the no-load rating of 2amps. Check your original motor in case it is different from mine. My original motor was 3 and 1/8" in diam. and the new one is 3". The shaft diameter is 5/16ths with a flat for the blade setscrew. Other than adding shims to the 3 point band mount on the motor, the only thing to be concerned about is that you have the rotation direction right. The motor is reversible. Surpluscenter part # is 10-1639. Chuck Harrison Akron, Ohio 90SP36 dgeForum@yahoogroups.com, erniecarpet@... wrote: > > Thanks, Chuck- what hp is your motor? > > Ernie Ekberg > 83PT40 > Livingston, Mt > > > > > ************************************** See what's free at http://www.aol.com. > > > [Non-text portions of this message have been removed] > |