Ride Height - Printable Version +- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com) +-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61) +--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63) +--- Thread: Ride Height (/showthread.php?tid=1788) |
Ride Height - smquandt - 05-05-2007 08:00 Don I just repeated the following and against my better judgement stuck my head under the coach to be sure that the rears were not inflated when the suspension switch only was on starting at a 100% dump: 1. Air up suspension only, front comes up, rear moves small amount, similar to Mike's measurement 2. Air up tags, rear goes to ride height. 3. Dump tags, rear goes down about 1" from ride height with all weight on drives only. 4. Dump suspension coach goes to bottom. 5. Got to #1 to repeat test Rears definitley are not inflating until the TAG switch is turned on! Steve Quandt 1993 PT-40 Iron Mountain, MI --- In WanderlodgeForum@yahoogroups.com, "Don Bradner" > > Certainly sounds like it shouldn't be, but add me to the anecdotal list that says it is working that way. I'm still very new to this, and have been in some tight campgrounds this trip, so I've tried to be conscientious about leaving the tag un-aired when departing; I've noted how low the rear was when I hooked my toad up. It does not drop when the tag is deflated on arrival. > > The answer on departure appears to be air everything up, then release the tag air. Why? I don't know. > > Don Bradner > 90 PT40 "Blue Thunder" > Posting on the road by satellite from > Grayland Beach State Park on the WA coast > > On 5/5/2007 at 6:37 AM jim riordan wrote: > > >That should not be! when you pressure up the main both front axle and > >drive axle should come up. Tag should come up with second swtich. Set up > >this way for getting coach in tight spots you can lift tag axle! > > > > Jim Riordan > > 88 WBWL XXV > > Stuart, Fl. > > > >smquandt > > Mike > > > >I discovered that when the suspension and the tag are both dumped and > >you turn on the suspension switch only, the front is the only thing > >that inflates. When you turn on the tag switch both tags and rear > >inflate, strange. Perhaps someone has the answer why. > > > >Now that I have the air bags figured out the refrigerator, NDR 1292, > >quits, questions on that to follow. > > > Ride Height - mbrund - 05-05-2007 15:32 Like Steve, I have repeated this process quite a few times over the last several weeks since I noticed it shortly after purchasing the coach. And in each case, the same thing occurs, just as Steve has explained it. The drive axle bags are full and hard before the tags are brought up as I have verified several times over the last month or so. Michael Brundridge 1992 WB40 Georgetown, Tx --- In WanderlodgeForum@yahoogroups.com, "smquandt" wrote: > > Don > > I just repeated the following and against my better judgement stuck > my head under the coach to be sure that the rears were not inflated > when the suspension switch only was on starting at a 100% dump: > > 1. Air up suspension only, front comes up, rear moves small > amount, similar to Mike's measurement > > 2. Air up tags, rear goes to ride height. > > 3. Dump tags, rear goes down about 1" from ride height with all > weight on drives only. > > 4. Dump suspension coach goes to bottom. > > 5. Got to #1 to repeat test > > Rears definitley are not inflating until the TAG switch is turned on! > > Steve Quandt > 1993 PT-40 > Iron Mountain, MI > > |