BLUEBIRD CLOCK - Curt Sprenger - 11-19-2008 04:04
Leroy,
Email your address. I'll send a tracing of the clock with measurements.
On Wed, Nov 19, 2008 at 5:03 AM, Leroy Eckert <"jwasnewski@yahoo.com"> wrote:
Thanks, How big are the letters and what are they made of. Thanks again.
Leory Eckert
1990 WB-40 Smoke N Mirrors
Dahlonega, GA
--- On Tue, 11/18/08, Marv & Jean <"marvwheeler@nwlink.com"> wrote:
From: Marv & Jean <"marvwheeler@nwlink.com">
Subject: [WanderlodgeForum] Re: Bluebird Clock
To: "WanderlodgeForum@yahoogroups.com"
Date: Tuesday, November 18, 2008, 7:47 PM
Leroy:
20 1/2 in. from noxe to tip of bottom wing, 5 3/4 in. high and 1 1/2
inches thick. That is from an original clock out of a 1982.
The numberals are: Blue Bird Emblem for 12 o'c;clock, W for 11, A
for 10 and so forth until you spell out Wanderlodge. It looks to me
if that is backwards but that is the way that they did it. Any other
questions mine is in the room with me.
Marv
2004 M380
Ocean Shores, WA
--- In "WanderlodgeForum%40yahoogroups.com", "Leroy A. Eckert"
wrote:
>
> Anyone out there with a BB clock? If you would give me a measurement
> from the nose of the bird to the end of the lower tail it would be
> appreciated. Also, does the movement protrude out the back of the
> wood? If so how far?
> I cut a prototype today out of 3/4" thick wood and it is 19" long by
> 6" high. It will accept a 2 3/4" to 3" quality quartz movement in
the
> wing. My prototype is made from white pine and the original will be
> blonde. I plan to make 7 prototypes to see what I can do with them.
I
> will use red oak on others and I plan to prime, base coat and clear
> coat some of the pine to see what happens. I don't have anything
else
> to do. Colors I am considering are rose,lagoon, black, red and
blue. I
> may air brush one in a bluebird style and see how that goes. I would
> clear coat that one. I would like to put a chime movement in one of
> them but it may need to be larger because of constraints in the size
> if available dials.
>
> All are being hand made.
> Thanks for any info.
>
>
> Leroy Eckert
> 1990 WB-40 Smoke N Mirrors
> Dahlonega, GA
> Royale Conversion
>
|
--
Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA
BLUEBIRD CLOCK - dwalks@... - 11-19-2008 05:46
I have an original and will sell itfor $35,000. Andthe coach is free.
Cram-alot-inn
walker
84fc35
kcmo
BLUEBIRD CLOCK - Marv & Jean - 11-19-2008 05:48
Leroy:
The letters are 5/16 in. and are black transfer decals. The letter
look to be "Arial" font. Don't hesitate to ask if you need anything
else.
Marv
2004 M380
Ocean Shores, WA
--- In WanderlodgeForum@yahoogroups.com, Leroy Eckert
wrote:
>
> Thanks, How big are the letters and what are they made of. Thanks
again.
> Leory Eckert
> 1990 WB-40 Smoke N Mirrors
> Dahlonega, GA
>
> --- On Tue, 11/18/08, Marv & Jean wrote:
> From: Marv & Jean
> Subject: [WanderlodgeForum] Re: Bluebird Clock
> To: WanderlodgeForum@yahoogroups.com
> Date: Tuesday, November 18, 2008, 7:47 PM
>
>
>
>
>
>
>
>
>
>
>
> Leroy:
>
>
>
> 20 1/2 in. from noxe to tip of bottom wing, 5 3/4 in. high and 1
1/2
>
> inches thick. That is from an original clock out of a 1982.
>
>
>
> The numberals are: Blue Bird Emblem for 12 o'c;clock, W for 11, A
>
> for 10 and so forth until you spell out Wanderlodge. It looks to
me
>
> if that is backwards but that is the way that they did it. Any
other
>
> questions mine is in the room with me.
>
>
>
> Marv
>
> 2004 M380
>
> Ocean Shores, WA
>
>
>
> --- In WanderlodgeForum@ yahoogroups. com, "Leroy A. Eckert"
>
> wrote:
>
> >
>
> > Anyone out there with a BB clock? If you would give me a
measurement
>
> > from the nose of the bird to the end of the lower tail it would be
>
> > appreciated. Also, does the movement protrude out the back of the
>
> > wood? If so how far?
>
> > I cut a prototype today out of 3/4" thick wood and it is 19" long
by
>
> > 6" high. It will accept a 2 3/4" to 3" quality quartz movement in
>
> the
>
> > wing. My prototype is made from white pine and the original will
be
>
> > blonde. I plan to make 7 prototypes to see what I can do with
them.
>
> I
>
> > will use red oak on others and I plan to prime, base coat and
clear
>
> > coat some of the pine to see what happens. I don't have anything
>
> else
>
> > to do. Colors I am considering are rose,lagoon, black, red and
>
> blue. I
>
> > may air brush one in a bluebird style and see how that goes. I
would
>
> > clear coat that one. I would like to put a chime movement in one
of
>
> > them but it may need to be larger because of constraints in the
size
>
> > if available dials.
>
> >
>
> > All are being hand made.
>
> > Thanks for any info.
>
> >
>
> >
>
> > Leroy Eckert
>
> > 1990 WB-40 Smoke N Mirrors
>
> > Dahlonega, GA
>
> > Royale Conversion
>
> >
>
BLUEBIRD CLOCK - Leroy Eckert - 11-19-2008 10:45
Thank you for the info.
Leroy Eckert
1990 WB-40 Smoke N Mirrors
Dahlonega, Ga
Royale Conversion
--- On Wed, 11/19/08, Marv & Jean wrote:
From: Marv & Jean
Subject: [WanderlodgeForum] Re: Bluebird Clock
To: WanderlodgeForum@yahoogroups.com
Date: Wednesday, November 19, 2008, 12:48 PM
Leroy:
The letters are 5/16 in. and are black transfer decals. The letter
look to be "Arial" font. Don't hesitate to ask if you need anything
else.
Marv
2004 M380
Ocean Shores, WA
--- In "WanderlodgeForum%40yahoogroups.com", Leroy Eckert
wrote:
>
> Thanks, How big are the letters and what are they made of. Thanks
again.
> Leory Eckert
> 1990 WB-40 Smoke N Mirrors
> Dahlonega, GA
>
> --- On Tue, 11/18/08, Marv & Jean wrote:
> From: Marv & Jean
> Subject: [WanderlodgeForum] Re: Bluebird Clock
> To: "WanderlodgeForum%40yahoogroups.com"
> Date: Tuesday, November 18, 2008, 7:47 PM
>
>
>
>
>
>
>
>
>
>
>
> Leroy:
>
>
>
> 20 1/2 in. from noxe to tip of bottom wing, 5 3/4 in. high and 1
1/2
>
> inches thick. That is from an original clock out of a 1982.
>
>
>
> The numberals are: Blue Bird Emblem for 12 o'c;clock, W for 11, A
>
> for 10 and so forth until you spell out Wanderlodge. It looks to
me
>
> if that is backwards but that is the way that they did it. Any
other
>
> questions mine is in the room with me.
>
>
>
> Marv
>
> 2004 M380
>
> Ocean Shores, WA
>
>
>
> --- In WanderlodgeForum@ yahoogroups. com, "Leroy A. Eckert"
>
> wrote:
>
> >
>
> > Anyone out there with a BB clock? If you would give me a
measurement
>
> > from the nose of the bird to the end of the lower tail it would be
>
> > appreciated. Also, does the movement protrude out the back of the
>
> > wood? If so how far?
>
> > I cut a prototype today out of 3/4" thick wood and it is 19" long
by
>
> > 6" high. It will accept a 2 3/4" to 3" quality quartz movement in
>
> the
>
> > wing. My prototype is made from white pine and the original will
be
>
> > blonde. I plan to make 7 prototypes to see what I can do with
them.
>
> I
>
> > will use red oak on others and I plan to prime, base coat and
clear
>
> > coat some of the pine to see what happens. I don't have anything
>
> else
>
> > to do. Colors I am considering are rose,lagoon, black, red and
>
> blue. I
>
> > may air brush one in a bluebird style and see how that goes. I
would
>
> > clear coat that one. I would like to put a chime movement in one
of
>
> > them but it may need to be larger because of constraints in the
size
>
> > if available dials.
>
> >
>
> > All are being hand made.
>
> > Thanks for any info.
>
> >
>
> >
>
> > Leroy Eckert
>
> > 1990 WB-40 Smoke N Mirrors
>
> > Dahlonega, GA
>
> > Royale Conversion
>
> >
>
|
BLUEBIRD CLOCK - jim riordan - 11-19-2008 14:59
gee sounds like a great deal!
dwalks@... wrote: I have an original and will sell itfor $35,000. Andthe coach is free. Cram-alot-inn walker 84fc35 kcmo
BLUEBIRD CLOCK - Dan Williams - 11-20-2008 08:00
Leroy, I have an extra clock I can send
you if you like and send it back when you are done. Dan, 88pt38 Jackson, MS
From: WanderlodgeForum@yahoogroups.com [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of Leroy Eckert
Sent: Wednesday, November 19, 2008
4:46 PM
To: WanderlodgeForum@yahoogroups.com
Subject: Re: [WanderlodgeForum]
Re: Bluebird Clock
Thank you for the info.
Leroy Eckert
1990 WB-40 Smoke N Mirrors
Dahlonega, Ga
Royale Conversion
--- On Wed, 11/19/08, Marv & Jean nwlink.com>
wrote:
From: Marv & Jean
nwlink.com>
Subject: [WanderlodgeForum] Re: Bluebird Clock
To: WanderlodgeForum@yahoogroups.com
Date: Wednesday, November 19, 2008, 12:48 PM
Leroy:
The letters are 5/16 in. and are black transfer decals. The letter
look to be "Arial" font. Don't hesitate to ask if you need anything
else.
Marv
2004 M380
Ocean Shores, WA
--- In WanderlodgeForum@
yahoogroups. com, Leroy Eckert
wrote:
>
> Thanks, How big are the letters and what are they made of. Thanks
again.
> Leory Eckert
> 1990 WB-40 Smoke N Mirrors
> Dahlonega, GA
>
> --- On Tue, 11/18/08, Marv & Jean wrote:
> From: Marv & Jean
> Subject: [WanderlodgeForum] Re: Bluebird Clock
> To: WanderlodgeForum@
yahoogroups. com
> Date: Tuesday, November 18, 2008, 7:47 PM
>
>
>
>
>
>
>
>
>
>
>
> Leroy:
>
>
>
> 20 1/2 in. from noxe to tip of bottom wing, 5 3/4 in. high and 1
1/2
>
> inches thick. That is from an original clock out of a 1982.
>
>
>
> The numberals are: Blue Bird Emblem for 12 o'c;clock, W for 11, A
>
> for 10 and so forth until you spell out Wanderlodge. It looks to
me
>
> if that is backwards but that is the way that they did it. Any
other
>
> questions mine is in the room with me.
>
>
>
> Marv
>
> 2004 M380
>
> Ocean Shores, WA
>
>
>
> --- In WanderlodgeForum@ yahoogroups. com, "Leroy A. Eckert"
>
> wrote:
>
> >
>
> > Anyone out there with a BB clock? If you would give me a
measurement
>
> > from the nose of the bird to the end of the lower tail it would be
>
> > appreciated. Also, does the movement protrude out the back of the
>
> > wood? If so how far?
>
> > I cut a prototype today out of 3/4" thick wood and it is
19" long
by
>
> > 6" high. It will accept a 2 3/4" to 3" quality
quartz movement in
>
> the
>
> > wing. My prototype is made from white pine and the original will
be
>
> > blonde. I plan to make 7 prototypes to see what I can do with
them.
>
> I
>
> > will use red oak on others and I plan to prime, base coat and
clear
>
> > coat some of the pine to see what happens. I don't have anything
>
> else
>
> > to do. Colors I am considering are rose,lagoon, black, red and
>
> blue. I
>
> > may air brush one in a bluebird style and see how that goes. I
would
>
> > clear coat that one. I would like to put a chime movement in one
of
>
> > them but it may need to be larger because of constraints in the
size
>
> > if available dials.
>
> >
>
> > All are being hand made.
>
> > Thanks for any info.
>
> >
>
> >
>
> > Leroy Eckert
>
> > 1990 WB-40 Smoke N Mirrors
>
> > Dahlonega, GA
>
> > Royale Conversion
>
> >
>
|
|