+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Sandbox (/forumdisplay.php?fid=6)
+--- Forum: Tools (/forumdisplay.php?fid=16)
+--- Thread: Mat Jack 1 (/showthread.php?tid=10293)
Mat Jack 1 - davidbrady - 09-17-2014 19:59
To R&R my Powertech Generator sump pan, I need a low profile jack. The plan is to insert a jack under the sump, disconnect the fore air springs, lift the front of the generator, and crib under the air spring mounts to gain access and clearance to all the sump pan bolts. Here's my low profile jack; it's a Mat Jack 1:
[attachment=1379][attachment=1380]
It's 6"x6" and 3/4" high when deflated. Inflated it will lift 1.5 tons to a height of 2 1/2 inches!
They're available in a variety of sizes up to 86 tons!
RE: Mat Jack 1 - ernie ekberg - 09-18-2014 08:00
and to say you went on a tool run and didn't ask anyone to go~
RE: Mat Jack 1 - davidbrady - 09-18-2014 13:40
My bad Ernie, especially given how this low profile jack caters to the expert flooring artisan!
RE: Mat Jack 1 - GregOConnor - 09-20-2014 12:04
lift from the pan may squash the pan gasket. Can you hoist?