Konstant Hot - Printable Version +- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com) +-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61) +--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63) +--- Thread: Konstant Hot (/showthread.php?tid=1134) |
Konstant Hot - Sidney Breese - 08-02-2005 06:44 The first winter I got my bird I drained the Konstant Hot dispenser tank. I have misplaced the drain plug which was a brass screw as I remember. I have looked all over for a replacement without luck. If someone could give me the screw # and thread count along with the length, I can probably pick one up at the hardware store. The model #E340 and made by Emerson. Or any suggestions on finding a replacement? Sid Breese 85PT40 St. Joseph, MO Konstant Hot - pattypape - 08-02-2005 10:16 Ours has a hex head 1/2 or 9/16 wrench, I think it looks like any standard brass plug available at HomeDepot or a plumbing hardware store. Just buy a few of all sizes, I always carry a few brass plugs and caps to plug air lines or water lines. They are cheap and do not take up much space. Bill 88 FC --- In WanderlodgeForum@yahoogroups.com, "Sidney Breese" <ssbreese@a...> wrote: > The first winter I got my bird I drained the Konstant Hot dispenser > tank. I have misplaced the drain plug which was a brass screw as I > remember. I have looked all over for a replacement without luck. If > someone could give me the screw # and thread count along with the > length, I can probably pick one up at the hardware store. The model > #E340 and made by Emerson. Or any suggestions on finding a replacement? > Sid Breese > 85PT40 > St. Joseph, MO |