+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: Seat on curb side 79 FC (/showthread.php?tid=1545)
Seat on curb side 79 FC - dspithaler@... - 11-10-2005 20:03
Hi All When I had new carpet installed in my 79 FC 33' side bath I left
the side chair behind the copilots seat out. When I sold it the new owner
wants to put it back in. My question is does any one have the exact location of
it as he can't find the holes under the carpet. A dimension from the front
kick by the copilots seat to the center of the base & does it fit tight to the
wheel well. Thanks
Don
89 SP 36'
Butler, PA
[Non-text portions of this message have been removed]
Seat on curb side 79 FC - erniecarpet@... - 11-10-2005 20:14
Don, is this a swivel chair? He might look from underneath the coach and
maybe able to find the holes? ERnie-83pt40 in Texas
[Non-text portions of this message have been removed]
Seat on curb side 79 FC - dspithaler@... - 11-10-2005 20:26
Ernie It is a swivel chair & if I were there I think I could find the
that way to but he said there was the foam insulation & he couldn't find them
I though if he had a close dimension he might be able to find them with a
sharp awl.
Don
89 SP 36'
Butler, PA
Don is that a swivel
chair? He might look from underneath the coach and
maybe able to find the holes? ERnie-83pt40 in Texas
[Non-text portions of this message have been removed]
Seat on curb side 79 FC - Jim Owens - 11-11-2005 04:39
Don, (et.al.)
You mean the swivel chairs are supposed to be bolted down? I wondered
about that before we removed the two in our 'Bird and replaced then
with an oak roll-top desk and file cabinet. I've seen many SOB's
with "loose" chairs, even another 'Bird.... Our 'Bird had two barrel
chairs aft of the curbside wheelwell - the seatbelts were secured
firmly but the chairs themselves weren't.
Jim & Pam Owens
77 FC33SB (Gas)
Lake of the Ozarks, MO
--- In WanderlodgeForum@yahoogroups.com, dspithaler@a... wrote:
>
> Hi All When I had new carpet installed in my 79 FC 33' side
bath I left
> the side chair behind the copilots seat out. When I sold it the
new owner
> wants to put it back in. My question is does any one have the
exact location of
> it as he can't find the holes under the carpet. A dimension from
the front
> kick by the copilots seat to the center of the base & does it fit
tight to the
> wheel well. Thanks
> Don
> 89 SP 36'
> Butler, PA
>
>
> [Non-text portions of this message have been removed]
>
Seat on curb side 79 FC - erniecarpet@... - 11-11-2005 06:40
We have one of those barrel chairs. Its' so heavy it doesn't move. Ernie in
Texas
-----Original Message-----
From: Jim Owens
To: WanderlodgeForum@yahoogroups.com
Sent: Fri, 11 Nov 2005 16:39:42 -0000
Subject: [WanderlodgeForum] Re: Seat on curb side 79 FC
Don, (et.al.)
You mean the swivel chairs are supposed to be bolted down? I wondered
about that before we removed the two in our 'Bird and replaced then
with an oak roll-top desk and file cabinet. I've seen many SOB's
with "loose" chairs, even another 'Bird.... Our 'Bird had two barrel
chairs aft of the curbside wheelwell - the seatbelts were secured
firmly but the chairs themselves weren't.
Jim & Pam Owens
77 FC33SB (Gas)
Lake of the Ozarks, MO
--- In WanderlodgeForum@yahoogroups.com, dspithaler@a... wrote:
>
> Hi All When I had new carpet installed in my 79 FC 33' side
bath I left
> the side chair behind the copilots seat out. When I sold it the
new owner
> wants to put it back in. My question is does any one have the
exact location of
> it as he can't find the holes under the carpet. A dimension from
the front
> kick by the copilots seat to the center of the base & does it fit
tight to the
> wheel well. Thanks
> Don
> 89 SP 36'
> Butler, PA
>
>
> [Non-text portions of this message have been removed]
>
Yahoo! Groups Links
[Non-text portions of this message have been removed]
Seat on curb side 79 FC - dspithaler@... - 11-11-2005 06:50
Hi Jim Both my seat are bolted down. With the base that is on them they
would not sit without being bolted through the floor.
Don
89 Sp 36'
Butler, PA
You mean the swivel chairs are supposed to be bolted down? I wondered
about that before we removed the two in our 'Bird and replaced then
with an oak roll-top desk and file cabinet. I've seen many SOB's
with "loose" chairs, even another 'Bird.... Our 'Bird had two barrel
chairs aft of the curbside wheelwell - the seatbelts were secured
firmly but the chairs themselves weren't.
Jim & Pam Owens
77 FC33SB (Gas)
Lake of the Ozarks, MO
[Non-text portions of this message have been removed]