Wanderlodge Gurus - The Member Funded Wanderlodge Forum
Bad wiring from factory? - Printable Version

+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: Bad wiring from factory? (/showthread.php?tid=1745)



Bad wiring from factory? - Scott Forman - 12-24-2005 06:06

Hello all,

I have spent the morning chasing wires in my FC in an effort to
figure out why the chassis heat won't work. I am using as a guide
the engineering plans that are in my blue box.

So far, I have found numerous wires in both the front and rear right-
side load centers that are not attached to the proper pins & sockets
as outlined in the plans. All of these wires are associated with the
chassis heat. I have not chnged things around yet to match the plans.

But this leads to my question: these load centers look to me like
they have never been touched. Everything is very neat and clean,
wires still bundled together tightly, all the number tags still
there, no splicing anywhere, etc. It looks like factory-quality
workmanship, not like anything any repair person I have ever had
experience with would leave. So the question is: do you think it is
possible it was wired incorrectly at the factory? Anyone ever come
across a similar situation? My coach spent it's whole life in Texas
before me...maybe 20 years of owners before me never tried to use the
chassis heat.

Scott Forman
82 FC35RB
Memphis


Bad wiring from factory? - Richard Hayden - 12-24-2005 06:39

Our previous BB was a '81FC31. It would never pre-heat the generator from
either of the switches. I discovered that the wires had never been installed.
I asked Bennie at BB service about this and he said that could "never happen",
that they must have been "moved by someone". I spent a lot of time looking,
because of what he had told me, and they just were not ever installed. So, it
can and does happen.

Dick Hayden '87PT38
----- Original Message -----
From: Scott Forman
To: WanderlodgeForum@yahoogroups.com
Sent: Saturday, December 24, 2005 10:06 AM
Subject: [WanderlodgeForum] Bad wiring from factory?


Hello all,

I have spent the morning chasing wires in my FC in an effort to
figure out why the chassis heat won't work. I am using as a guide
the engineering plans that are in my blue box.

So far, I have found numerous wires in both the front and rear right-
side load centers that are not attached to the proper pins & sockets
as outlined in the plans. All of these wires are associated with the
chassis heat. I have not chnged things around yet to match the plans.

But this leads to my question: these load centers look to me like
they have never been touched. Everything is very neat and clean,
wires still bundled together tightly, all the number tags still
there, no splicing anywhere, etc. It looks like factory-quality
workmanship, not like anything any repair person I have ever had
experience with would leave. So the question is: do you think it is
possible it was wired incorrectly at the factory? Anyone ever come
across a similar situation? My coach spent it's whole life in Texas
before me...maybe 20 years of owners before me never tried to use the
chassis heat.

Scott Forman
82 FC35RB
Memphis





SPONSORED LINKS Recreational
vehicles<http://groups.yahoo.com/gads?t=ms&k=Recreational+vehicles&w1=Recreation\
al+vehicles&w2=Wanderlodge&w3=Automotive+maintenance&w4=Recreational+vehicle+dea\
ler&w5=Used+recreational+vehicles&w6=Automotive+radiators&c=6&s=163&.sig=DAUkCKk\
U7Dzhn_ObWmSYTw>
Wanderlodge<http://groups.yahoo.com/gads?t=ms&k=Wanderlodge&w1=Recreational+vehi\
cles&w2=Wanderlodge&w3=Automotive+maintenance&w4=Recreational+vehicle+dealer&w5=\
Used+recreational+vehicles&w6=Automotive+radiators&c=6&s=163&.sig=Z-8HJdysB3QLPj\
9U0JvqYQ> Automotive
maintenance<http://groups.yahoo.com/gads?t=ms&k=Automotive+maintenance&w1=Recrea\
tional+vehicles&w2=Wanderlodge&w3=Automotive+maintenance&w4=Recreational+vehicle\
+dealer&w5=Used+recreational+vehicles&w6=Automotive+radiators&c=6&s=163&.sig=IF4\
u_5wI8Pmy34cC1O9CxA>
Recreational vehicle
dealer<http://groups.yahoo.com/gads?t=ms&k=Recreational+vehicle+dealer&w1=Recrea\
tional+vehicles&w2=Wanderlodge&w3=Automotive+maintenance&w4=Recreational+vehicle\
+dealer&w5=Used+recreational+vehicles&w6=Automotive+radiators&c=6&s=163&.sig=z6_\
XahaeYHfELr6o72IW1A> Used recreational
vehicles<http://groups.yahoo.com/gads?t=ms&k=Used+recreational+vehicles&w1=Recre\
ational+vehicles&w2=Wanderlodge&w3=Automotive+maintenance&w4=Recreational+vehicl\
e+dealer&w5=Used+recreational+vehicles&w6=Automotive+radiators&c=6&s=163&.sig=UG\
EY5km4L-kXbDI4ZSadEw> Automotive
radiators<http://groups.yahoo.com/gads?t=ms&k=Automotive+radiators&w1=Recreation\
al+vehicles&w2=Wanderlodge&w3=Automotive+maintenance&w4=Recreational+vehicle+dea\
ler&w5=Used+recreational+vehicles&w6=Automotive+radiators&c=6&s=163&sig=ePNVMmIS\
sCWgTnMq_4GlXA>


------------------------------------------------------------------------------
YAHOO! GROUPS LINKS

a.. Visit your group
"WanderlodgeForum<http://groups.yahoo.com/group/WanderlodgeForum>" on the web.

b.. To unsubscribe from this group, send an email to:

WanderlodgeForum-unsubscribe@yahoogroups.com @yahoogroups.com?subject=Unsubscribe>

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service<http://docs.yahoo.com/info/terms/>.


------------------------------------------------------------------------------



[Non-text portions of this message have been removed]


Bad wiring from factory? - John Suter - 12-24-2005 10:38

Hi Scott,

Coming up on a twenty year span, three Birds have
been wired different from what their schematic showed;
all in more than one area. Additionally, one had an
isolator diode soldered backwards which contributed to
the house battery bank constantly becoming discharged,
in spite of repeated warranty work-orders and battery
replacements. Therefore, I'm not the person to ask if
what you experienced could be created during
manufacturing.

John Suter


--- Scott Forman <sforman@...> wrote:

> Hello all,
>
> I have spent the morning chasing wires in my FC in
> an effort to
> figure out why the chassis heat won't work. I am
> using as a guide
> the engineering plans that are in my blue box.
>
> So far, I have found numerous wires in both the
> front and rear right-
> side load centers that are not attached to the
> proper pins & sockets
> as outlined in the plans. All of these wires are
> associated with the
> chassis heat. I have not chnged things around yet
> to match the plans.
>
> But this leads to my question: these load centers
> look to me like
> they have never been touched. Everything is very
> neat and clean,
> wires still bundled together tightly, all the number
> tags still
> there, no splicing anywhere, etc. It looks like
> factory-quality
> workmanship, not like anything any repair person I
> have ever had
> experience with would leave. So the question is: do
> you think it is
> possible it was wired incorrectly at the factory?
> Anyone ever come
> across a similar situation? My coach spent it's
> whole life in Texas
> before me...maybe 20 years of owners before me never
> tried to use the
> chassis heat.
>
> Scott Forman
> 82 FC35RB
> Memphis
>
>
>
>




__________________________________________
Yahoo! DSL – Something to write home about.
Just $16.99/mo. or less.
dsl.yahoo.com


Bad wiring from factory? - Jeff Miller - 12-25-2005 07:14

Hmm, an '82 possibly wired wrong?

Hard to say whether it has been changed in the past 24years, might
be, might not be. Most of the coaches from that era I've been through
have many surprises added by miscellaneous owners and RV shops over
the past 1/4 century.

That not being the case, lets just say that '82 was a year with a lot
of training, the largest production year at Wanderlodge from what
I've been told, also the year that the PT was introduced and the FC
was changed significantly, ... a lot of things slipped through the
cracks in '82 from my experience. Having something mis-wired would
not be normal, but not a shock to me either (no pun intended).

- Jeff Miller
in Holland, MI


--- In WanderlodgeForum@yahoogroups.com, "Richard Hayden"
wrote:
>
> Our previous BB was a '81FC31. It would never pre-heat the
generator from either of the switches. I discovered that the wires
had never been installed. I asked Bennie at BB service about this
and he said that could "never happen", that they must have
been "moved by someone". I spent a lot of time looking, because of
what he had told me, and they just were not ever installed. So, it
can and does happen.
>
> Dick Hayden '87PT38
> ----- Original Message -----
> From: Scott Forman
> To:
WanderlodgeForum@yahoogroups.com om>
> Sent: Saturday, December 24, 2005 10:06 AM
> Subject: [WanderlodgeForum] Bad wiring from factory?
>
>
> Hello all,
>
> I have spent the morning chasing wires in my FC in an effort to
> figure out why the chassis heat won't work. I am using as a
guide
> the engineering plans that are in my blue box.
>
> So far, I have found numerous wires in both the front and rear
right-
> side load centers that are not attached to the proper pins &
sockets
> as outlined in the plans. All of these wires are associated with
the
> chassis heat. I have not chnged things around yet to match the
plans.
>
> But this leads to my question: these load centers look to me like
> they have never been touched. Everything is very neat and clean,
> wires still bundled together tightly, all the number tags still
> there, no splicing anywhere, etc. It looks like factory-quality
> workmanship, not like anything any repair person I have ever had
> experience with would leave. So the question is: do you think it
is
> possible it was wired incorrectly at the factory? Anyone ever
come
> across a similar situation? My coach spent it's whole life in
Texas
> before me...maybe 20 years of owners before me never tried to use
the
> chassis heat.
>
> Scott Forman
> 82 FC35RB
> Memphis
>
>
>
>
>
> SPONSORED LINKS Recreational
vehicles<http://groups.yahoo.com/gads?
t=ms&k=Recreational+vehicles&w1=Recreational+vehicles&w2=Wanderlodge&w
3=Automotive+maintenance&w4=Recreational+vehicle+dealer&w5=Used+recrea
tional+vehicles&w6=Automotive+radiators&c=6&s=163&.sig=DAUkCKkU7Dzhn_O
bWmSYTw> Wanderlodge<http://groups.yahoo.com/gads?
t=ms&k=Wanderlodge&w1=Recreational+vehicles&w2=Wanderlodge&w3=Automoti
ve+maintenance&w4=Recreational+vehicle+dealer&w5=Used+recreational+veh
icles&w6=Automotive+radiators&c=6&s=163&.sig=Z-8HJdysB3QLPj9U0JvqYQ>
Automotive maintenance<http://groups.yahoo.com/gads?
t=ms&k=Automotive+maintenance&w1=Recreational+vehicles&w2=Wanderlodge&
w3=Automotive+maintenance&w4=Recreational+vehicle+dealer&w5=Used+recre
ational+vehicles&w6=Automotive+radiators&c=6&s=163&.sig=IF4u_5wI8Pmy34
cC1O9CxA>
> Recreational vehicle dealer<http://groups.yahoo.com/gads?
t=ms&k=Recreational+vehicle+dealer&w1=Recreational+vehicles&w2=Wanderl
odge&w3=Automotive+maintenance&w4=Recreational+vehicle+dealer&w5=Used+
recreational+vehicles&w6=Automotive+radiators&c=6&s=163&.sig=z6_XahaeY
HfELr6o72IW1A> Used recreational
vehicles<http://groups.yahoo.com/gads?
t=ms&k=Used+recreational+vehicles&w1=Recreational+vehicles&w2=Wanderlo
dge&w3=Automotive+maintenance&w4=Recreational+vehicle+dealer&w5=Used+r
ecreational+vehicles&w6=Automotive+radiators&c=6&s=163&.sig=UGEY5km4L-
kXbDI4ZSadEw> Automotive radiators<http://groups.yahoo.com/gads?
t=ms&k=Automotive+radiators&w1=Recreational+vehicles&w2=Wanderlodge&w3
=Automotive+maintenance&w4=Recreational+vehicle+dealer&w5=Used+recreat
ional+vehicles&w6=Automotive+radiators&c=6&s=163&sig=ePNVMmISsCWgTnMq_
4GlXA>
>
>
> --------------------------------------------------------------------
----------
> YAHOO! GROUPS LINKS
>
> a.. Visit your
group "WanderlodgeForum<http://groups.yahoo.com/group/WanderlodgeForum
>" on the web.
>
> b.. To unsubscribe from this group, send an email to:
> WanderlodgeForum-
unsubscribe@yahoogroups.com unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms
of Service<http://docs.yahoo.com/info/terms/>.
>
>
> --------------------------------------------------------------------
----------
>
>
>
> [Non-text portions of this message have been removed]
>