Wanderlodge Gurus - The Member Funded Wanderlodge Forum
Connecting An Inveter to The House/Starting Bank - Printable Version

+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: Connecting An Inveter to The House/Starting Bank (/showthread.php?tid=2229)

Connecting An Inveter to The House/Starting Bank - orbitalsolutions - 03-20-2006 08:03

I am installing an Inverter and want to connect it directly to the
House/Starting Bank in my 78FC33. The bank is configured in the
original Series/Paralle configuration.

Where do I connect the Positive and Negative leads of the inverter to
the bank? I am not sure which terminals to use.

Thanks in advance to those who have been here and done this.



--James

78FC33SB

LasVegas NV

Connecting An Inveter to The House/Starting Bank - Jim Owens - 03-20-2006 15:01

James,

FWIW, Check out the files section over on the FC_Wanderlaodge Yahoo
website. I believe you'll find some help there, T.J.Hannik detailed
his inverter installation on an early FC.

Jim Owens
77 FC33SB (Gas)
Lale of the Ozarks, MO

--- In WanderlodgeForum@yahoogroups.com, "orbitalsolutions"
wrote:
>
>
> I am installing an Inverter and want to connect it directly to the
> House/Starting Bank in my 78FC33. The bank is configured in the
> original Series/Paralle configuration.
>
> Where do I connect the Positive and Negative leads of the inverter
to
> the bank? I am not sure which terminals to use.
>
> Thanks in advance to those who have been here and done this.
>
>
>
> --James
>
> 78FC33SB
>
> LasVegas NV
>

Connecting An Inveter to The House/Starting Bank - Jim Owens - 03-20-2006 15:09

James,

http://tinyurl.com/zgfns

or the long version

http://f3.grp.yahoofs.com/v1/MGwfRGGxgRBR0xcjn4_Cx283MJcCLkJlBb58_3cCp
RNPk7v-g9A15qAc1EFZUWPTP7UJEJvcAmrn9dxt1st9HMXYjtpJNis8lg/Inverter%
20Install

--- In WanderlodgeForum@yahoogroups.com, "orbitalsolutions"
wrote:
>
>
> I am installing an Inverter and want to connect it directly to the
> House/Starting Bank in my 78FC33. The bank is configured in the
> original Series/Paralle configuration.
>
> Where do I connect the Positive and Negative leads of the inverter
to
> the bank? I am not sure which terminals to use.
>
> Thanks in advance to those who have been here and done this.
>
>
>
> --James
>
> 78FC33SB
>
> LasVegas NV
>

Connecting An Inveter to The House/Starting Bank - orbitalsolutions - 03-21-2006 07:17

Thanks, Jim. I appreciate the info, have a great day.

-James
78FC33SB
LasVegas NV


-- In WanderlodgeForum@yahoogroups.com, "Jim Owens"
wrote:
>
> James,
>
> http://tinyurl.com/zgfns
>
> or the long version
>
>
http://f3.grp.yahoofs.com/v1/MGwfRGGxgRBR0xcjn4_Cx283MJcCLkJlBb58_3cC
p
> RNPk7v-g9A15qAc1EFZUWPTP7UJEJvcAmrn9dxt1st9HMXYjtpJNis8lg/Inverter%
> 20Install
>
> --- In WanderlodgeForum@yahoogroups.com, "orbitalsolutions"
> wrote:
> >
> >
> > I am installing an Inverter and want to connect it directly to
the
> > House/Starting Bank in my 78FC33. The bank is configured in the
> > original Series/Paralle configuration.
> >
> > Where do I connect the Positive and Negative leads of the
inverter
> to
> > the bank? I am not sure which terminals to use.
> >
> > Thanks in advance to those who have been here and done this.
> >
> >
> >
> > --James
> >
> > 78FC33SB
> >
> > LasVegas NV
> >
>

Connecting An Inveter to The House/Starting Bank - orbitalsolutions - 03-21-2006 08:11

Jim, that was a lot of info, and mighty good stuff, with the
exception that it does not tell me which terminals of the 4
batteries to wire the converter to.

I am doing a very simple installation. I only want to convert
electricity in ONE dedicated circuit, to run an entertainment
center, nothing more. This circuit will consist of an extension
cord that will run from the converter to the entertainment center.

What I need to figure out, is which terminals of the four positive
and negative posts are best to hook the inverter up to. My bank is
the original configuration with (4) 6 volt batteries that serve as
both the house and starting bank.

Anyone?


-James
78FC33SB
LasVegas NV






--- In WanderlodgeForum@yahoogroups.com, "orbitalsolutions"
wrote:
>
> Thanks, Jim. I appreciate the info, have a great day.
>
> -James
> 78FC33SB
> LasVegas NV
>
>
> -- In WanderlodgeForum@yahoogroups.com, "Jim Owens"
> wrote:
> >
> > James,
> >
> > http://tinyurl.com/zgfns
> >
> > or the long version
> >
> >
>
http://f3.grp.yahoofs.com/v1/MGwfRGGxgRBR0xcjn4_Cx283MJcCLkJlBb58_3cC
> p
> > RNPk7v-
g9A15qAc1EFZUWPTP7UJEJvcAmrn9dxt1st9HMXYjtpJNis8lg/Inverter%
> > 20Install
> >
> > --- In WanderlodgeForum@yahoogroups.com, "orbitalsolutions"
> > wrote:
> > >
> > >
> > > I am installing an Inverter and want to connect it directly
to
> the
> > > House/Starting Bank in my 78FC33. The bank is configured in
the
> > > original Series/Paralle configuration.
> > >
> > > Where do I connect the Positive and Negative leads of the
> inverter
> > to
> > > the bank? I am not sure which terminals to use.
> > >
> > > Thanks in advance to those who have been here and done this.
> > >
> > >
> > >
> > > --James
> > >
> > > 78FC33SB
> > >
> > > LasVegas NV
> > >
> >
>