+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: Acuride Draw Slides (/showthread.php?tid=2394)
Acuride Draw Slides - Rob Robinson - 04-13-2006 17:33
Has anyone got a source for those little black plastic alignment pins. These
are the pins you have to push in before the drawer can be lifted out. This is
the sytem where the drawers lift out rather than slide off the rails.
Rob, Sue & Merlin
94 WLWB
Acuride Draw Slides - Morey Zuber - 04-16-2006 10:57
Go to the Accuride site-
http://www.accuride.com/products/woodworking/category.php
and try to identify your slides. Email Accuride technical support on
the same website, and ask how to obtain this plastic part, they might
send them no charge.
Morey Zuber
Soon2be- Marietta, GA
--- In WanderlodgeForum@yahoogroups.com, Rob Robinson
wrote:
>
> Has anyone got a source for those little black plastic alignment
pins. These
> are the pins you have to push in before the drawer can be lifted
out. This is
> the sytem where the drawers lift out rather than slide off the
rails.
>
> Rob, Sue & Merlin
> 94 WLWB
>