+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: Lug Nut Size? (/showthread.php?tid=3139)
Lug Nut Size? - erniecarpet@... - 08-12-2006 05:58
Scott, I don't know what size socket you'll need but you better buy a big
cheeter bar.
Ernie Ekberg
83 PT40
Livingston, Montana
[Non-text portions of this message have been removed]
Lug Nut Size? - Scott Forman - 08-12-2006 09:39
What size are wheel lug nuts on FC's? Need to buy a new socket.
Scott Forman
82 FC35RB
Memphis
Lug Nut Size? - Tim Hannink - 08-12-2006 13:46
1-1/2" hex for the lug nuts, 13/16" square for the rear inner
stud/nuts.
I picked up a Budd lug wrench on ebaY that is about 1' long and has
one socket on each end. It also has a 3/4" hole on both ends for
putting a leverage bar into.
I picked up a 4' piece of 3/4" round stock to use as a leverage bar.
I also have a 5' piece of 3/4" water pipe that I store it inside of.
It's a tight fit and makes a great extension for the leverage bar -
I can extend it to almost 8' long.
Good luck,
Tim Hannink
Full-timing in Orlando, FL
1981 FC-33SB
Using a Cingular wireless card in the laptop to get online.
--- In WanderlodgeForum@yahoogroups.com, "Scott Forman"
<sforman@...> wrote:
>
> What size are wheel lug nuts on FC's? Need to buy a new socket.
>
> Scott Forman
> 82 FC35RB
> Memphis
>