+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: Splendide 2000 WD-802 (/showthread.php?tid=3679)
Splendide 2000 WD-802 - jwasnewski - 10-22-2006 06:00
Info:
My 15 year old Splendide suddenly failed. The good folks in the
service department at Splendide saved me a bunch of money by telling me
how to isolate and test the module board. A new board was $195.00 and
30 minutes to install. I'll post the info and part numbers on the
database/parts section.
Leroy Eckert
1990 WB-40
Niceville, FL
Splendide 2000 WD-802 - Henry Jay Hannigan - 10-22-2006 07:20
---Leroy:
My Splendide 5200 failed a couple years ago in my 90SP36...luckily
it was still under warranty....I talked them into sending me
the "fix" packet....a new board and many wires to reattach....It was
pretty easy..I just took one off and put one on etc. etc. took me a
couple hours as I am old and slow...been working fine ever since...I
really like the Splendide washer/dryer, so much that I put a new
6200 in my 80FC31....
LOL,
Hank Hannigan
90SP36..keeping it
80FC31 selling it in VEGAS in next 10 days or it goes to storage.
In WanderlodgeForum@yahoogroups.com, "jwasnewski"
wrote:
>
> Info:
> My 15 year old Splendide suddenly failed. The good folks in the
> service department at Splendide saved me a bunch of money by
telling me
> how to isolate and test the module board. A new board was $195.00
and
> 30 minutes to install. I'll post the info and part numbers on the
> database/parts section.
>
> Leroy Eckert
> 1990 WB-40
> Niceville, FL
>
Splendide 2000 WD-802 - Leroy Eckert - 10-22-2006 08:38
Hank:
Splendide told me the new units use 12v motors. Is your new washers motor 12v?
My old one is 120v and NLA.
Leroy Eckert
1990 WB-40
Niceville, FL
----- Original Message -----
From: Henry Jay Hannigan
To: WanderlodgeForum@yahoogroups.com
Sent: Sunday, October 22, 2006 2:20 PM
Subject: [WanderlodgeForum] Re: Splendide 2000 WD-802
---Leroy:
My Splendide 5200 failed a couple years ago in my 90SP36...luckily
it was still under warranty....I talked them into sending me
the "fix" packet....a new board and many wires to reattach....It was
pretty easy..I just took one off and put one on etc. etc. took me a
couple hours as I am old and slow...been working fine ever since...I
really like the Splendide washer/dryer, so much that I put a new
6200 in my 80FC31....
LOL,
Hank Hannigan
90SP36..keeping it
80FC31 selling it in VEGAS in next 10 days or it goes to storage.
In WanderlodgeForum@yahoogroups.com, "jwasnewski"
wrote:
>
> Info:
> My 15 year old Splendide suddenly failed. The good folks in the
> service department at Splendide saved me a bunch of money by
telling me
> how to isolate and test the module board. A new board was $195.00
and
> 30 minutes to install. I'll post the info and part numbers on the
> database/parts section.
>
> Leroy Eckert
> 1990 WB-40
> Niceville, FL
>
[Non-text portions of this message have been removed]
Splendide 2000 WD-802 - Henry Jay Hannigan - 10-22-2006 09:44
---LEROY:
mY 90sp HAS A SPLENDIDE 5200...115 VOLTS
MY 80FC HAS A SPLENDIDE 6200...115 VOLTS
THEY ARE NICE UNITS..WASH AND DAMP DRY..JUST TAKE THEM OUT AT END OF
DRY CYCLE AND SHAKE CLOTHES AND THEY ARE DRY..
I DO NOT HAVE ANY INFO ON 12VOLT MODELS.
REGARDS,
HANK HANNIGAN
90SP36 KEEPING IT IN vegas
80fc31 FOR SALE IN vegas
In WanderlodgeForum@yahoogroups.com, "Leroy Eckert"
>
> Hank:
> Splendide told me the new units use 12v motors. Is your new
washers motor 12v? My old one is 120v and NLA.
>
> Leroy Eckert
> 1990 WB-40
> Niceville, FL
>
>
>
>
>
> ----- Original Message -----
> From: Henry Jay Hannigan
> To: WanderlodgeForum@yahoogroups.com
> Sent: Sunday, October 22, 2006 2:20 PM
> Subject: [WanderlodgeForum] Re: Splendide 2000 WD-802
>
>
> ---Leroy:
> My Splendide 5200 failed a couple years ago in my
90SP36...luckily
> it was still under warranty....I talked them into sending me
> the "fix" packet....a new board and many wires to reattach....It
was
> pretty easy..I just took one off and put one on etc. etc. took
me a
> couple hours as I am old and slow...been working fine ever
since...I
> really like the Splendide washer/dryer, so much that I put a new
> 6200 in my 80FC31....
> LOL,
> Hank Hannigan
> 90SP36..keeping it
> 80FC31 selling it in VEGAS in next 10 days or it goes to storage.
>
> In WanderlodgeForum@yahoogroups.com, "jwasnewski"
> wrote:
> >
> > Info:
> > My 15 year old Splendide suddenly failed. The good folks in
the
> > service department at Splendide saved me a bunch of money by
> telling me
> > how to isolate and test the module board. A new board was
$195.00
> and
> > 30 minutes to install. I'll post the info and part numbers on
the
> > database/parts section.
> >
> > Leroy Eckert
> > 1990 WB-40
> > Niceville, FL
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
Splendide 2000 WD-802 - erniecarpet@... - 10-23-2006 09:12
Ed- the Splendide is a Swedish clothes washer and dryer. It takes up some
valuable closet space- but if I had a 450-- I would have one in a heartbeat.
[Non-text portions of this message have been removed]
Splendide 2000 WD-802 - Ed Gardels - 10-23-2006 12:16
--- In WanderlodgeForum@yahoogroups.com, "jwasnewski"
>I dont know what a splendide board is, ....new to bb lingo
Ed Gardels 89sp
Arlington, Texas
> Info:
> My 15 year old Splendide suddenly failed. The good folks in the
> service department at Splendide saved me a bunch of money by
telling me
> how to isolate and test the module board. A new board was $195.00
and
> 30 minutes to install. I'll post the info and part numbers on the
> database/parts section.
>
> Leroy Eckert
> 1990 WB-40
> Niceville, FL
>
Splendide 2000 WD-802 - Ed Gardels - 10-23-2006 12:16
--- In WanderlodgeForum@yahoogroups.com, "jwasnewski"
>I dont know what a splendide board is, ....new to bb lingo
Ed Gardels 89sp
Arlington, Texas
> Info:
> My 15 year old Splendide suddenly failed. The good folks in the
> service department at Splendide saved me a bunch of money by
telling me
> how to isolate and test the module board. A new board was $195.00
and
> 30 minutes to install. I'll post the info and part numbers on the
> database/parts section.
>
> Leroy Eckert
> 1990 WB-40
> Niceville, FL
>
Splendide 2000 WD-802 - Leroy Eckert - 10-23-2006 13:10
Ed, just passing along info on my Splendide washer/dryer combo. The units
control board/circuit board if you will turned out to be defective. Splendide
saved me the labor for service calls and parts mark-up by telling me what to
check based on my problem
Doesn't have anything to do with BB but if you have a Splendide washer/dryer
combo in your bus it sure is nice to save $500 or so. Most manufacturers would
not do what Splendide did for me. The part was delivered in 48 hrs. Great
service.
Leroy Eckert
1990 WB-40
Niceville, FL
----- Original Message -----
From: Ed Gardels
To: WanderlodgeForum@yahoogroups.com
Sent: Monday, October 23, 2006 7:16 PM
Subject: [WanderlodgeForum] Re: Splendide 2000 WD-802
--- In WanderlodgeForum@yahoogroups.com, "jwasnewski"
>I dont know what a splendide board is, ....new to bb lingo
Ed Gardels 89sp
Arlington, Texas
> Info:
> My 15 year old Splendide suddenly failed. The good folks in the
> service department at Splendide saved me a bunch of money by
telling me
> how to isolate and test the module board. A new board was $195.00
and
> 30 minutes to install. I'll post the info and part numbers on the
> database/parts section.
>
> Leroy Eckert
> 1990 WB-40
> Niceville, FL
>
[Non-text portions of this message have been removed]