+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: drawer catch source? (/showthread.php?tid=4447)
drawer catch source? - thomas_sorrentino - 03-03-2007 12:47
All the drawer catches in my coach are the same. Roughly 1"x2" aluminum
stock with a slight bend where the cutout for the catch is. Most of
them are mangled. Does anyone have a source for new ones? I'm tired of
drawers coming open around every corner.
Tom Sorrentino
1987 PT38
Bedford Hills, NY
drawer catch source? - car_go_van - 03-03-2007 13:57
Try this site.
http://wwhardware.com/catalog.cfm/GroupID/Catches%20Latches%20and%
20Bolts/CatID/Latches/showprod/1
A.Powell
88PT40WB
--- In WanderlodgeForum@yahoogroups.com, "thomas_sorrentino"
>
> All the drawer catches in my coach are the same. Roughly 1"x2"
aluminum
> stock with a slight bend where the cutout for the catch is. Most of
> them are mangled. Does anyone have a source for new ones? I'm tired
of
> drawers coming open around every corner.
>
> Tom Sorrentino
> 1987 PT38
> Bedford Hills, NY
>
drawer catch source? - Robert Britton - 03-03-2007 14:27
Not sure but I think they are made by Actron, you might be able to
get them from BlueBird.
Robert Britton
87FC
Hollister, California
--- In WanderlodgeForum@yahoogroups.com, "thomas_sorrentino"
>
> All the drawer catches in my coach are the same. Roughly 1"x2"
aluminum
> stock with a slight bend where the cutout for the catch is. Most of
> them are mangled. Does anyone have a source for new ones? I'm tired
of
> drawers coming open around every corner.
>
> Tom Sorrentino
> 1987 PT38
> Bedford Hills, NY
>
drawer catch source? - thomas_sorrentino - 03-10-2007 03:05
To all looking for the drawer catches. I have not been able to find a
source without someone actually making them. As advised by someone on
the forum, I think Actron made them, but I have not been able to get
an answer from them, if they could still supply them. At this point I
think there is enough interest as a group that maybe we could have
someone make them. I know that Blair offered and I would be willing
to pay him for his efforts, but I don't know how many he wants to
make. I know I need around 20. My coach is 600 miles away right now,
so I don't have a good one to go by. So I guess I'm asking if there's
anybody in the group that wants to take the bull by the horns, get a
count of how many we want and see if we can get Blair or a machine
shop to make these up. Any other idea's?
Tom Sorrentino
1987 PT38 (waiting in Mrytle Beach)
Bedford Hills, NY
--- In WanderlodgeForum@yahoogroups.com, "thomas_sorrentino"
>
> All the drawer catches in my coach are the same. Roughly 1"x2"
aluminum
> stock with a slight bend where the cutout for the catch is. Most of
> them are mangled. Does anyone have a source for new ones? I'm tired
of
> drawers coming open around every corner.
>
> Tom Sorrentino
> 1987 PT38
> Bedford Hills, NY
>