+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: Oil Sender (/showthread.php?tid=4800)
Oil Sender - jqrjr - 05-01-2007 05:34
I have a 1988 WBWL XXV with a 8V92. I recently repalced the oil temp
gauage, The gauge was not an exact replacement for the old one. The
readings seem high, in talking with Earl, we thought that maybe i
needed to change out the sending switch/sensor in the engine. does
anybody know it's location?
Jim Riordan
88 WBWL XXV
Oil Sender - Leroy Eckert - 05-01-2007 06:56
Mine is screwed into a brass T mounted on the frame about two feet forward of
the rear bumper on the curb side.
Leroy Eckert
1990 WB-40"Smoke N Mirrors"
Niceville, FL
----- Original Message -----
From: jqrjr
To: WanderlodgeForum@yahoogroups.com
Sent: Tuesday, May 01, 2007 12:34 PM
Subject: [WanderlodgeForum] Oil Sender
I have a 1988 WBWL XXV with a 8V92. I recently repalced the oil temp
gauage, The gauge was not an exact replacement for the old one. The
readings seem high, in talking with Earl, we thought that maybe i
needed to change out the sending switch/sensor in the engine. does
anybody know it's location?
Jim Riordan
88 WBWL XXV
[Non-text portions of this message have been removed]