+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: silcone hoses (/showthread.php?tid=5388)
silcone hoses - mjzakowski - 07-21-2007 01:46
I am rebuilding my 6V92 and need to know where to buy some silcone
hoses for the motor. thanks
Joe in Indiana
1984 1/2 PT40
silcone hoses - bloomas - 07-21-2007 04:11
----- Original Message -----
From: mjzakowski
To: WanderlodgeForum@yahoogroups.com
Sent: Saturday, July 21, 2007 8:46 AM
Subject: [WanderlodgeForum] silcone hose
Hi Joe I bought some from a parts place.The other thing
you can do to find out where to buy is enter silicone hose into a search site
like google.You should be able to fine a location close to you.
Bob Loomas 1985 PT 36
I am rebuilding my 6V92 and need to know where to buy some silcone
hoses for the motor. thanks
Joe in Indiana
1984 1/2 PT40
[Non-text portions of this message have been removed]
silcone hoses - mbrund - 07-21-2007 04:12
If you have a Fleetpride near you (there's one in Clarksville), they
handle various sizes in both stright and elbows.
Also make sure to get the proper type clamps for silicon hoses,
don't stop at the local car parts house and buy those car clamps. I
suggest in all cases they be stainless, and I would suggest a
constant tension type clamp (Ideal stainless FlexGear HD or Gates
Green Strip Constant Tension to name two). If the price of those is
too high for any project, at a minimum use a lined band type
stainless clamp, that way the band notches don't eat into the hose
and cause an early failure.
Michael Brundridge
'92 WB40
Georgetown, TX
--- In WanderlodgeForum@yahoogroups.com, "mjzakowski"
<mjzakowski@...> wrote:
>
> I am rebuilding my 6V92 and need to know where to buy some silcone
> hoses for the motor. thanks
>
> Joe in Indiana
> 1984 1/2 PT40
>
silcone hoses - Gene Sharp - 07-21-2007 09:07
Hi Joe,
Got mine from Detroit Diesel when the engine was rebuilt.
They gave a good price.
Oh, the engine was rebuilt because the previous owner
ran it out of oil/overheated. Runs fantastic now.
Gene Sharp
93 Wanderlodge DDE
Belle Center, Ohio
--- In
WanderlodgeForum@yahoogroups.com, "mjzakowski" <mjzakowski@...> wrote:
>
> I am rebuilding my 6V92 and need to know where to buy some silcone
> hoses for the motor. thanks
>
> Joe in Indiana
> 1984 1/2 PT40
>