![]() |
Recommendation for machine shop in Seattle/Tacoma??? - Printable Version +- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com) +-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61) +--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63) +--- Thread: Recommendation for machine shop in Seattle/Tacoma??? (/showthread.php?tid=5512) |
Recommendation for machine shop in Seattle/Tacoma??? - Andy Coleman - 08-12-2007 14:32 Hello fellow Wanderlodgers, Can anyone recommend a good machine shop in the Seattle/Tacoma area? We're far from home (New Jersey) and getting some bad bearing noises from our clutch fan assembly. We have the bearings for it but don't know where to go... Any help would be greatly appreciated. Thanks! Andy Coleman 83 FC35 Spring Lake, NJ Recommendation for machine shop in Seattle/Tacoma??? - Marv & Jean - 08-12-2007 15:48 Andy: Welcome to the Northwest but sorry you are having trouble. I can't recomment a machine shop but there is a place that a number of Blue Bird owners use. Martin is a good guy and will treat you right. M & M Truck Maintenance 3421 Chapel Street S Lakewood WA 98499 Toll Free: 866-504-8990 24 hr pager: 800-745-6113 Phone: 253-588-8990 He does a lot of work on the Birds for the Air Force and the Army. He is located just off I-5 at Hwy 512. If you decide to check them out give them a call and ask them for directions. I could get you there but I would imagine they have easier directions than mine would be. I hope this helps. Marv Wheeler 2004 M380 Ocean Shores, WA --- In WanderlodgeForum@yahoogroups.com, "Andy Coleman" > > Hello fellow Wanderlodgers, > > Can anyone recommend a good machine shop in the Seattle/Tacoma area? > We're far from home (New Jersey) and getting some bad bearing noises > from our clutch fan assembly. We have the bearings for it but don't > know where to go... > > Any help would be greatly appreciated. > > Thanks! > > Andy Coleman > 83 FC35 Spring Lake, NJ > Recommendation for machine shop in Seattle/Tacoma??? - Jon - 08-12-2007 17:51 --- In WanderlodgeForum@yahoogroups.com, "Marv & Jean" > > Andy: > > Welcome to the Northwest but sorry you are having trouble. I can't > recomment a machine shop but there is a place that a number of Blue > Bird owners use. Martin is a good guy and will treat you right. > > M & M Truck Maintenance > 3421 Chapel Street S > Lakewood WA 98499 > > Toll Free: 866-504-8990 > 24 hr pager: 800-745-6113 > Phone: 253-588-8990 > > He does a lot of work on the Birds for the Air Force and the Army. > He is located just off I-5 at Hwy 512. If you decide to check them > out give them a call and ask them for directions. I could get you > there but I would imagine they have easier directions than mine would > be. > > I hope this helps. > > Marv Wheeler > 2004 M380 > Ocean Shores, WA > > --- In WanderlodgeForum@yahoogroups.com, "Andy Coleman" > > > > > Hello fellow Wanderlodgers, > > > > Can anyone recommend a good machine shop in the Seattle/Tacoma > area? > > We're far from home (New Jersey) and getting some bad bearing > noises > > from our clutch fan assembly. We have the bearings for it but > don't > > know where to go... > > > > Any help would be greatly appreciated. > > > > Thanks! > > > > Andy Coleman > > 83 FC35 Spring Lake, NJ Andy I agree with Marv that this is a great shop to deal with. Jon Rebel Bird > > > Recommendation for machine shop in Seattle/Tacoma??? - Rob Robinson - 08-12-2007 18:06 Do they do windshield replacements? On 12/08/07, Jon > > --- In WanderlodgeForum@yahoogroups.com > "Marv & Jean" > > > > > Andy: > > > > Welcome to the Northwest but sorry you are having trouble. I can't > > recomment a machine shop but there is a place that a number of Blue > > Bird owners use. Martin is a good guy and will treat you right. > > > > M & M Truck Maintenance > > 3421 Chapel Street S > > Lakewood WA 98499 > > > > Toll Free: 866-504-8990 > > 24 hr pager: 800-745-6113 > > Phone: 253-588-8990 > > > > He does a lot of work on the Birds for the Air Force and the Army. > > He is located just off I-5 at Hwy 512. If you decide to check them > > out give them a call and ask them for directions. I could get you > > there but I would imagine they have easier directions than mine > would > > be. > > > > I hope this helps. > > > > Marv Wheeler > > 2004 M380 > > Ocean Shores, WA > > > > --- In WanderlodgeForum@yahoogroups.com > "Andy Coleman" > > > > > > > > Hello fellow Wanderlodgers, > > > > > > Can anyone recommend a good machine shop in the Seattle/Tacoma > > area? > > > We're far from home (New Jersey) and getting some bad bearing > > noises > > > from our clutch fan assembly. We have the bearings for it but > > don't > > > know where to go... > > > > > > Any help would be greatly appreciated. > > > > > > Thanks! > > > > > > Andy Coleman > > > 83 FC35 Spring Lake, NJ > > Andy I agree with Marv that this is a great shop to deal with. > > Jon > Rebel Bird > > > > > > > > -- Rob, Sue & Merlin Robinson 94 WLWB [Non-text portions of this message have been removed] Recommendation for machine shop in Seattle/Tacoma??? - Andy Coleman - 08-12-2007 20:59 Thank you Marv - I'm going to contact Martin first thing in the morning. I'm staying in the KOA Campground outside Seattle for a few days. Hoping to pull off the fan & clutch and bring it to Martin (or somebody he recommends) to fix while we tour Seattle for the first time. Boy is this Wanderlodge Forum a great resource! Thank you everyone who responded! Andy 83 FC-35 Spring Lake, NJ --- In WanderlodgeForum@yahoogroups.com, "Marv & Jean" > > Andy: > > Welcome to the Northwest but sorry you are having trouble. I can't > recomment a machine shop but there is a place that a number of Blue > Bird owners use. Martin is a good guy and will treat you right. > > M & M Truck Maintenance > 3421 Chapel Street S > Lakewood WA 98499 > > Toll Free: 866-504-8990 > 24 hr pager: 800-745-6113 > Phone: 253-588-8990 > > He does a lot of work on the Birds for the Air Force and the Army. > He is located just off I-5 at Hwy 512. If you decide to check them > out give them a call and ask them for directions. I could get you > there but I would imagine they have easier directions than mine would > be. > > I hope this helps. > > Marv Wheeler > 2004 M380 > Ocean Shores, WA > > --- In WanderlodgeForum@yahoogroups.com, "Andy Coleman" > > > > > Hello fellow Wanderlodgers, > > > > Can anyone recommend a good machine shop in the Seattle/Tacoma > area? > > We're far from home (New Jersey) and getting some bad bearing > noises > > from our clutch fan assembly. We have the bearings for it but > don't > > know where to go... > > > > Any help would be greatly appreciated. > > > > Thanks! > > > > Andy Coleman > > 83 FC35 Spring Lake, NJ > > > Recommendation for machine shop in Seattle/Tacoma??? - Bob Lawrence - 08-13-2007 06:26 I agree with Marv. I pass that KOA every morning going to work. Crowded sucker, isn't it? Bob Lawrence 84 PT36 Tacky Tacoma, Wa. > > Thank you Marv - > > I'm going to contact Martin first thing in the morning. > > I'm staying in the KOA Campground outside Seattle for a few days. > Hoping to pull off the fan & clutch and bring it to Martin (or > somebody he recommends) to fix while we tour Seattle for the first > time. > > Boy is this Wanderlodge Forum a great resource! Thank you everyone > who responded! > > Andy > 83 FC-35 > Spring Lake, NJ > > --- In WanderlodgeForum@yahoogroups.com, "Marv & Jean" > > > > > Andy: > > > > Welcome to the Northwest but sorry you are having trouble. I > can't > > recomment a machine shop but there is a place that a number of > Blue > > Bird owners use. Martin is a good guy and will treat you right. > > > > M & M Truck Maintenance > > 3421 Chapel Street S > > Lakewood WA 98499 > > > > Toll Free: 866-504-8990 > > 24 hr pager: 800-745-6113 > > Phone: 253-588-8990 > > > > He does a lot of work on the Birds for the Air Force and the > Army. > > He is located just off I-5 at Hwy 512. If you decide to check > them > > out give them a call and ask them for directions. I could get you > > there but I would imagine they have easier directions than mine > would > > be. > > > > I hope this helps. > > > > Marv Wheeler > > 2004 M380 > > Ocean Shores, WA > > > > --- In WanderlodgeForum@yahoogroups.com, "Andy Coleman" > > > > > > > > Hello fellow Wanderlodgers, > > > > > > Can anyone recommend a good machine shop in the Seattle/Tacoma > > area? > > > We're far from home (New Jersey) and getting some bad bearing > > noises > > > from our clutch fan assembly. We have the bearings for it but > > don't > > > know where to go... > > > > > > Any help would be greatly appreciated. > > > > > > Thanks! > > > > > > Andy Coleman > > > 83 FC35 Spring Lake, NJ > > > > > > |