+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: 300 amp alternator oil leak (/showthread.php?tid=6515)
300 amp alternator oil leak - Fred Hulse - 03-23-2008 13:00
Those of us with the Delco Remy oil cooled 300 amp alternator on 60 series DD.
They tend to seep oil behind the pulley after time and throw a mist of oil all over the right side of the engine compartment around and near the hydraulic reserviour.
After finding a seal and gasket package for the job ended up fairly simple.
After removing the belt and pulley, 8 bolts now hold the seal plate,after removal and cleanup the seal is removed by pressing it out the front of the flange and the new seal pressed in.An o ring is on the pulley shaft behind the removable race and a gasket installs behind the seal flange.Reassemble and you are finished.
After finding a seal and gasket package for the job ended up fairly simple.
After removing the belt and pulley, 8 bolts now hold the seal plate,after removal and cleanup the seal is removed by pressing it out the front of the flange and the new seal pressed in.An o ring is on the pulley shaft behind the removable race and a gasket installs behind the seal flange.Reassemble and you are finished.
About one hour including cleanup
Fred & Jeanne Hulse
Morristown Arizona
1997 Wanderlodge WLWB41
Morristown Arizona
1997 Wanderlodge WLWB41