+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: BBQ Bay Upgrade/ was inverter RV3012 M upgrade Photos (/showthread.php?tid=6897)
BBQ Bay Upgrade/ was inverter RV3012 M upgrade Photos - bumpersbird - 06-22-2008 15:40
Well after a long post a few weeks ago the inverters are still not
installed. They will have to go back in their origonal place.
When you only have lemons make lemon aide.
I had already started to upgrade the shelf to support the 120LBS of the
2 inveters. I lined the shelf with some sheet metal and built an
aluminum T bracket to support the weight, and a few new angles to beef
up the shelfs capacity.
You can see these pics in my album BUMPERSBIRD or just click on the new
photos on the home page. The first on 62208-1 is the metal linning the
second 62208-2 is the support bracket.
The third photo is my answer to which grill should I have in the BBQ
Bay? Well I liked the electric grill and after a good look and working
on it, it is a really well built grill, so I decided to keep it. Sorry
guys, I'll have to retract my offer to sell it. I also agree with the
idea of a gas grill especially an infrared grill. I chose the Solaire
most because as you can see from the photos the two units fit on the
slide out. Gas or Electric? Yes Why not both well? Yes, and it all fits
quite well. I shot this photo at night I'll get some better one in the
AM.
The last pic, 62208-4, is my engine compartment cooling fans, I just
got them in this evening and need to hook up the control systems. I
think I may get the frame powder coated black, because when the gill is
closed you can see all the framing from the outside, I'm not sure I can
live with that look.
Hopefully I get up to N'ville in the next few weeks to get the
inverters put in.
Kurt Horvath
95 PT-42 WLWB
10AC