+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: Suspension Standing Too High (/showthread.php?tid=7037)
Suspension Standing Too High - Curt Sprenger - 08-27-2008 04:08
There are two pressure regulators that control the air springs. One is for the tag axle and one for the steer/drive axles. Today I found that SECOND pressure regulator.
It's mounted to the rear of the cross member in front of the drive
axle. A whole lot of stuff is mounted in line with the regulator and
will need to be disconnected/removed in order to replace the regulator.
--
Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA
It's mounted to the rear of the cross member in front of the drive
axle. A whole lot of stuff is mounted in line with the regulator and
will need to be disconnected/removed in order to replace the regulator.
--
Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA