Driving Lights-wiring - rssdmc - 04-08-2009 08:40
I am trying to rewire driving lights so that they will work without
being tied to the high beams. I have disconnected the orange wire found on the
high beam post and connected it to an independent switched positive terminal. I
am now having problems with the driving light air switch on the transmission
console and the air "controller" or solinoid in the front of the dash. I know
that wire # 3 goes between the air switch and the driving light switch on the
transmission console. What I don't know is where the red wire from the air
switch goes and the # 11 wire from the driving lights switch on the console
goes. Can anyone help??
Thank you
Robert and Dianne
Robert=the repairer
Dianne=now that you fixed that what about the other 10 projects?
Forgot to mention this is a 1987FC Wanderlodge
Driving Lights-wiring - Curt Sprenger - 04-08-2009 10:11
Robert,
I sent to you a BB schematic that should help you.
Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA
Read all about Southwest Bluebirds and Friends (SWBB) at http://www.SOUTHWEST-BLUEBIRDS.ORG ...Then Join us.
"Host of the Annual Bluebird Quartzsite Rally"
On Wed, Apr 8, 2009 at 1:40 PM, rssdmc <"robert@savage-family.com"> wrote:
I am trying to rewire driving lights so that they will work without
being tied to the high beams. I have disconnected the orange wire found on the high beam post and connected it to an independent switched positive terminal. I am now having problems with the driving light air switch on the transmission console and the air "controller" or solinoid in the front of the dash. I know that wire # 3 goes between the air switch and the driving light switch on the transmission console. What I don't know is where the red wire from the air switch goes and the # 11 wire from the driving lights switch on the console goes. Can anyone help??
Thank you
Robert and Dianne
Robert=the repairer
Dianne=now that you fixed that what about the other 10 projects?
Forgot to mention this is a 1987FC Wanderlodge
Driving Lights-wiring - Donald Spithaler - 04-08-2009 11:49
Hi Curt     Can you send the BB Schematic to me?    Thanks
Don Spithaler
89 SP 36'Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Butler, PA
"dspithaler@gmail.com"
On Wed, Apr 8, 2009 at 6:11 PM, Curt Sprenger <"curtsprenger@gmail.com"> wrote:
Robert,
I sent to you a BB schematic that should help you.
Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA
Read all about Southwest Bluebirds and Friends (SWBB) at http://www.SOUTHWEST-BLUEBIRDS.ORG ...Then Join us.
"Host of the Annual Bluebird Quartzsite Rally"
On Wed, Apr 8, 2009 at 1:40 PM, rssdmc <"robert@savage-family.com"> wrote:
I am trying to rewire driving lights so that they will work without
being tied to the high beams. I have disconnected the orange wire found on the high beam post and connected it to an independent switched positive terminal. I am now having problems with the driving light air switch on the transmission console and the air "controller" or solinoid in the front of the dash. I know that wire # 3 goes between the air switch and the driving light switch on the transmission console. What I don't know is where the red wire from the air switch goes and the # 11 wire from the driving lights switch on the console goes. Can anyone help??
Thank you
Robert and Dianne
Robert=the repairer
Dianne=now that you fixed that what about the other 10 projects?
Forgot to mention this is a 1987FC Wanderlodge
Driving Lights-wiring - Curt Sprenger - 04-08-2009 15:06
Don,
The Schematic is heading your way.
Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA
Read all about Southwest Bluebirds and Friends (SWBB) at http://www.SOUTHWEST-BLUEBIRDS.ORG ...Then Join us.
"Host of the Annual Bluebird Quartzsite Rally"
On Wed, Apr 8, 2009 at 4:49 PM, Donald Spithaler <"dspithaler@gmail.com"> wrote:
Hi CurtÃÂ ÃÂ ÃÂ ÃÂ ÃÂ Can you send the BB Schematic to me?ÃÂ ÃÂ ÃÂ ÃÂ Thanks
Don Spithaler
89 SP 36'ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ ÃÂ
Butler, PA
"dspithaler@gmail.com"
On Wed, Apr 8, 2009 at 6:11 PM, Curt Sprenger <"curtsprenger@gmail.com"> wrote:
Robert,
I sent to you a BB schematic that should help you.
Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA
Read all about Southwest Bluebirds and Friends (SWBB) at http://www.SOUTHWEST-BLUEBIRDS.ORG ...Then Join us.
"Host of the Annual Bluebird Quartzsite Rally"
On Wed, Apr 8, 2009 at 1:40 PM, rssdmc <"robert@savage-family.com"> wrote:
I am trying to rewire driving lights so that they will work without
being tied to the high beams. I have disconnected the orange wire found on the high beam post and connected it to an independent switched positive terminal. I am now having problems with the driving light air switch on the transmission console and the air "controller" or solinoid in the front of the dash. I know that wire # 3 goes between the air switch and the driving light switch on the transmission console. What I don't know is where the red wire from the air switch goes and the # 11 wire from the driving lights switch on the console goes. Can anyone help??
Thank you
Robert and Dianne
Robert=the repairer
Dianne=now that you fixed that what about the other 10 projects?
Forgot to mention this is a 1987FC Wanderlodge
Driving Lights-wiring - Fred Bellows - 04-08-2009 16:07
Curt, I am trying to get my driving lights working as well. Could you also
forward a copy of that to me too?
THANX,
Fred
nytexcel@...
Fred Bellows
90 SP
"Maunder Maximum"
Queen Creek, AZ (basically Phx)
Driving Lights-wiring - jgarner @dslextreme.com - 04-08-2009 16:16
Hi Curt,
Id like a copy too...
TIA, Joe
'87 PT40
On Wed, Apr 8, 2009 at 3:11 PM, Curt Sprenger <"curtsprenger@gmail.com"> wrote:
Robert,
I sent to you a BB schematic that should help you.
Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA
Read all about Southwest Bluebirds and Friends (SWBB) at http://www.SOUTHWEST-BLUEBIRDS.ORG ...Then Join us.
"Host of the Annual Bluebird Quartzsite Rally"
On Wed, Apr 8, 2009 at 1:40 PM, rssdmc <"robert@savage-family.com"> wrote:
I am trying to rewire driving lights so that they will work without
being tied to the high beams. I have disconnected the orange wire found on the high beam post and connected it to an independent switched positive terminal. I am now having problems with the driving light air switch on the transmission console and the air "controller" or solinoid in the front of the dash. I know that wire # 3 goes between the air switch and the driving light switch on the transmission console. What I don't know is where the red wire from the air switch goes and the # 11 wire from the driving lights switch on the console goes. Can anyone help??
Thank you
Robert and Dianne
Robert=the repairer
Dianne=now that you fixed that what about the other 10 projects?
Forgot to mention this is a 1987FC Wanderlodge
--
-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=
Joe Garner     IASEL-RV 6@OAK aka 'Snoopy'
jgarner(a t)elelink org               |
jgarner(a t)dslextreme com    .______(o)______.
kc6utr(a t)w6pw   www elelink org    /    \
-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=
|