Wanderlodge Gurus - The Member Funded Wanderlodge Forum
86 PT40 water inlet question - Printable Version

+- Wanderlodge Gurus - The Member Funded Wanderlodge Forum (http://www.wanderlodgegurus.com)
+-- Forum: Yahoo Groups Archive (/forumdisplay.php?fid=61)
+--- Forum: WanderlodgeForum (/forumdisplay.php?fid=63)
+--- Thread: 86 PT40 water inlet question (/showthread.php?tid=9672)

86 PT40 water inlet question - Greg Young - 09-27-2012 06:20

Hi!

As previously reported, I've sold Bluefire to Kevin & Arla from Portland. But
there was one system problem I completely forgot about and need to repair before
handing it over on Saturday.

When the coach water pump is on, water sprays out of the exterior shore water
inlet unless it is firmly capped off with a screw-in plug. I believe I
accidentally poked through a backflow valve when trying to clear out debris from
the inlet.

Does anyone have a part number, or suggestion for repair? I'm sitting in a
conference room at Valley Power Systems getting the oil changed so my access to
documentation and the internet is limited, and I'm hoping to get this repaired
before Saturday.

Thanks so much!
Greg Young
86 Wanderlodge PT40 Bluefire
San Marcos, CA

Sent with love from my iPad

86 PT40 water inlet question - Curt Sprenger - 09-27-2012 08:38

Greg,
 
I sent you an email with photos, and what I did to resolve the same problem. It's on this forum and WOG.

Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"

Anaheim Hills, CA
"curtsprenger@gmail.com"
One of the "Birds of a Feather" (BoF) Organizers




On Thu, Sep 27, 2012 at 11:20 AM, Greg Young <"gregy1@yahoo.com"> wrote:

 


Hi!



As previously reported, I've sold Bluefire to Kevin & Arla from Portland. But there was one system problem I completely forgot about and need to repair before handing it over on Saturday.



When the coach water pump is on, water sprays out of the exterior shore water inlet unless it is firmly capped off with a screw-in plug. I believe I accidentally poked through a backflow valve when trying to clear out debris from the inlet.



Does anyone have a part number, or suggestion for repair? I'm sitting in a conference room at Valley Power Systems getting the oil changed so my access to documentation and the internet is limited, and I'm hoping to get this repaired before Saturday.



Thanks so much!

Greg Young

86 Wanderlodge PT40 Bluefire

San Marcos, CA



Sent with love from my iPad