Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Heater part
12-10-2009, 02:22
Post: #21
Heater part
Chuck: What was your temp. set at? Was it automatic or manual?

R.E. (Ron) Marabito, Dallas, TX 92WB40

--- In WanderlodgeForum@yahoogroups.com, "Chuck Wheeler" wrote:
>
> Besides the current draw of the heater you need to know the cutoff
> temperature. I was lucky, the switch used in our heaters was the same one
> used to protect most electric dryers so it was available and cheap ($6.50)
> locally at Appliance parts.
>
>
>
> - Chuck Wheeler-
>
> 1982 FC 31SB Fort Worth TX
>
> _____
>
> From: WanderlodgeForum@yahoogroups.com
> [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of David Ward
> Sent: Wednesday, December 09, 2009 8:33 PM
> To: WanderlodgeForum@yahoogroups.com
> Subject: Re: [WanderlodgeForum] Re: Heater part
>
>
>
>
>
>
> Ron,
> I would think that given the wattage of the heater somebody like Grainger or
> Johnstone Supply should be able to come up with a high limit switch for it.
> Dave Ward
> 80FC31SB
> Mesa, AZ
>
> --- On Thu, 12/10/09, ronmarabito2002 wrote:
>
>
> From: ronmarabito2002
> Subject: [WanderlodgeForum] Re: Heater part
> To: WanderlodgeForum@yahoogroups.com
> Date: Thursday, December 10, 2009, 2:26 AM
>
>
>
> They are not interested in selling anything for the old models. They only
> want to sell you a new heater unit complete. All I need is a less than $10
> part and I intend to find it somewhere.
>
> Thanks for your response.
>
> R.E. (Ron) Marabito, Dallas, TX 92WB40
>
> --- In WanderlodgeForum@ yahoogroups. com, "marvjeanm380"
> wrote:
> >
> > Ron:
> >
> > Cadet is located in Vancouver, WA. Their main part supplier is Reliable
> Parts. They have a location in the Portland, OR area that I have bought
> from. Their number is Sales: (503) 239-6050. Give them a call and they will
> either sell you a part or can provide you with a current model electric
> heater. I bought one for a project and it was suprisingly cheap.
> >
> > Marv
> > 2004 M380
> > Ocean Shores, WA
> >
> >
> > --- In WanderlodgeForum@ yahoogroups. com, "ronmarabito2002" > > wrote:
> > >
> > > No temperature stamped on this one. Only markings are TOD-1-B1-B
> > >
> > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> > >
> > > --- In WanderlodgeForum@ yahoogroups.. com, "Chuck Wheeler"
> wrote:
> > > >
> > > > Ron, if you look closely you should see a temperature stamped in it.
> This
> > > > is the cutoff temperature that protects from overheating. They are
> > > > available locally here from Granger, although I get most of my parts
> from
> > > > Appliance parts Co in Richland hills.
> > > >
> > > >
> > > >
> > > > - Chuck Wheeler-
> > > >
> > > > 1982 FC 31SB Fort Worth TX
> > > >
> > > > _____
> > > >
> > > > From: WanderlodgeForum@ yahoogroups. com
> > > > [mailto:WanderlodgeForum@ yahoogroups. com] On Behalf Of
> ronmarabito2002
> > > > Sent: Wednesday, December 09, 2009 11:21 AM
> > > > To: WanderlodgeForum@ yahoogroups. com
> > > > Subject: [WanderlodgeForum] Re: Heater part
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Yes Curt. How do we determine the correct size?
> > > >
> > > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> > > >
> > > > --- In WanderlodgeForum@
> > > > yahoogroups. com, Curt Sprenger wrote:
> > > > >
> > > > > Ron,
> > > > >
> > > > > Look like this?
> > > > >
> > > > > http://www.thermodi
> > > > <http://www.thermodi
> <http://www.thermodisc.com/productdetail.asp?ProductID=1> sc.com/productde
> tail.asp? ProductID= 1>
> > > > sc.com/productdetai l.asp?ProductID= 1
> > > > >
> > > > > the site has lots of them.
> > > > >
> > > > >
> > > > > Curt Sprenger
> > > > > 1987 PT38 8V92 "MacAttack Racing"
> > > > > Anaheim Hills, CA
> > > > >
> > > > >
> > > > >
> > > > > On Wed, Dec 9, 2009 at 9:07 AM, ronmarabito2002
> wrote:
> > > > >
> > > > > >
> > > > > >
> > > > > > Studying this closer, it is probably a heat sensor or
> thermocouple.
> > > > > >
> > > > > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> > > > > >
> > > > > > --- In WanderlodgeForum@ > ups.com>
> > > > yahoogroups. com,
> > > > > > "ronmarabito2002" wrote:
> > > > > > >
> > > > > > > Hi all: Does anyone have a source for the round disc resistor or
> > > > > > capacitor that mounts in the top of the Bathroom Electric Heater
> for a
> > > > > > 92WB40. Mine has disintegrated and can't get heat.
> > > > > > >
> > > > > > > It has TOD 1-B1-B stamped on it.
> > > > > > >
> > > > > > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
Quote this message in a reply
12-10-2009, 03:48
Post: #22
Heater part

If I understand correctly we are talking
about the safety cutoff switch. They are not adjustable. You select one with
the correct cutoff temperature.

- Chuck
Wheeler-

1982 FC 31SB Fort Worth TX



From: WanderlodgeForum@yahoogroups.com [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of ronmarabito2002

Sent: Thursday, December 10, 2009
8:23 AM

To: WanderlodgeForum@yahoogroups.com

Subject: [WanderlodgeForum] Re:
Heater part



Chuck: What was your temp. set at? Was it automatic or
manual?



R.E. (Ron) Marabito, Dallas,
TX
92WB40



--- In "WanderlodgeForum%40yahoogroups.com",
"Chuck Wheeler" .> wrote:

>

> Besides the current draw of the heater you need to know the cutoff

> temperature. I was lucky, the switch used in our heaters was the same one

> used to protect most electric dryers so it was available and cheap ($6.50)

> locally at Appliance parts.

>

>

>

> - Chuck Wheeler-

>

> 1982 FC 31SB Fort Worth
TX


>

> _____

>

> From: "WanderlodgeForum%40yahoogroups.com"

> [mailto:"WanderlodgeForum%40yahoogroups.com"]
On Behalf Of David Ward

> Sent: Wednesday, December 09, 2009 8:33 PM

> To: "WanderlodgeForum%40yahoogroups.com"

> Subject: Re: [WanderlodgeForum] Re: Heater part

>

>

>

>

>

>

> Ron,

> I would think that given the wattage of the heater somebody like Grainger
or

> Johnstone Supply should be able to come up with a high limit switch for
it.

> Dave Ward

> 80FC31SB

> Mesa, AZ

>

> --- On Thu, 12/10/09, ronmarabito2002 ...> wrote:

>

>

> From: ronmarabito2002 ...>

> Subject: [WanderlodgeForum] Re: Heater part

> To: "WanderlodgeForum%40yahoogroups.com"

> Date: Thursday, December 10, 2009, 2:26 AM

>

>

>

> They are not interested in selling anything for the old models. They only

> want to sell you a new heater unit complete. All I need is a less than $10

> part and I intend to find it somewhere.

>

> Thanks for your response.

>

> R.E. (Ron) Marabito, Dallas,
TX
92WB40

>

> --- In WanderlodgeForum@ yahoogroups. com, "marvjeanm380"


> wrote:

> >

> > Ron:

> >

> > Cadet is located in Vancouver,
WA
. Their main part supplier is
Reliable

> Parts. They have a location in the Portland,
OR
area that I have bought

> from. Their number is Sales: (503) 239-6050. Give them a call and they
will

> either sell you a part or can provide you with a current model electric

> heater. I bought one for a project and it was suprisingly cheap.

> >

> > Marv

> > 2004 M380

> > Ocean Shores, WA

> >

> >

> > --- In WanderlodgeForum@ yahoogroups. com,
"ronmarabito2002"
> > wrote:

> > >

> > > No temperature stamped on this one. Only markings are TOD-1-B1-B

> > >

> > > R.E. (Ron) Marabito, Dallas,
TX
92WB40

> > >

> > > --- In WanderlodgeForum@ yahoogroups.. com, "Chuck
Wheeler"

> wrote:

> > > >

> > > > Ron, if you look closely you should see a temperature
stamped in it.

> This

> > > > is the cutoff temperature that protects from overheating.
They are

> > > > available locally here from Granger, although I get most of
my parts

> from

> > > > Appliance parts Co in Richland
hills.

> > > >

> > > >

> > > >

> > > > - Chuck Wheeler-

> > > >

> > > > 1982 FC 31SB Fort
Worth
TX


> > > >

> > > > _____

> > > >

> > > > From: WanderlodgeForum@ yahoogroups. com

> > > > [mailto:WanderlodgeForum@ yahoogroups. com] On Behalf
Of

> ronmarabito2002

> > > > Sent: Wednesday, December 09, 2009 11:21 AM

> > > > To: WanderlodgeForum@ yahoogroups. com

> > > > Subject: [WanderlodgeForum] Re: Heater part

> > > >

> > > >

> > > >

> > > >

> > > >

> > > > Yes Curt. How do we determine the correct size?

> > > >

> > > > R.E. (Ron) Marabito, Dallas,
TX
92WB40

> > > >

> > > > --- In WanderlodgeForum@ ups.com>

> > > > yahoogroups. com, Curt Sprenger
wrote:

> > > > >

> > > > > Ron,

> > > > >

> > > > > Look like this?

> > > > >

> > > > > http://www.thermodi

> > > > <http://www.thermodi

> <http://www.thermodisc.com/productdetail.asp?ProductID=1>
sc.com/productde

> tail.asp? ProductID= 1>

> > > > sc.com/productdetai l.asp?ProductID= 1

> > > > >

> > > > > the site has lots of them.

> > > > >

> > > > >

> > > > > Curt Sprenger

> > > > > 1987 PT38 8V92 "MacAttack Racing"

> > > > > Anaheim Hills,
CA


> > > > >

> > > > >

> > > > >

> > > > > On Wed, Dec 9, 2009 at 9:07 AM, ronmarabito2002


> wrote:

> > > > >

> > > > > >

> > > > > >

> > > > > > Studying this closer, it is probably a heat
sensor or

> thermocouple.

> > > > > >

> > > > > > R.E. (Ron) Marabito, Dallas, TX
92WB40

> > > > > >

> > > > > > --- In WanderlodgeForum@ Forum%40yahoogro

> ups.com>

> > > > yahoogroups. com ps.com>,

> > > > > > "ronmarabito2002"
wrote:

> > > > > > >

> > > > > > > Hi all: Does anyone have a source for the
round disc resistor or

> > > > > > capacitor that mounts in the top of the Bathroom
Electric Heater

> for a

> > > > > > 92WB40. Mine has disintegrated and can't get
heat.

> > > > > > >

> > > > > > > It has TOD 1-B1-B stamped on it.

> > > > > > >

> > > > > > > R.E. (Ron) Marabito, Dallas, TX
92WB40

> > > > > > >

> > > > > >

> > > > > >

> > > > > >

> > > > >

> > > >

> > >

> >

>

Quote this message in a reply
12-10-2009, 12:33
Post: #23
Heater part
Ron, the book for my Primus says that they are 140 degree sensors, and will allow the toe kick fans to come on after the fluid gets to that temp.But in replacing one recently Bleakleyput in one rated at 110 degrees.
Rick Davis
1993 WBSA
Loudon, TN



From: Chuck Wheeler
To: WanderlodgeForum@yahoogroups.com
Sent: Thu, December 10, 2009 10:48:57 AM
Subject: RE: [WanderlodgeForum] Re: Heater part




If I understand correctly we are talking about the safety cutoff switch. They are not adjustable. You select one with the correct cutoff temperature.

- Chuck Wheeler-

1982 FC 31SB Fort Worth TX



From: WanderlodgeForum@ yahoogroups. com [mailto: WanderlodgeForum@ yahoogroups. com ] On Behalf Of ronmarabito2002
Sent: Thursday, December 10, 2009 8:23 AM
To: WanderlodgeForum@ yahoogroups. com
Subject: [WanderlodgeForum] Re: Heater part



Chuck: What was your temp. set at? Was it automatic or manual?

R.E. (Ron) Marabito, Dallas , TX 92WB40

--- In "WanderlodgeForum%40yahoogroups.com", "Chuck Wheeler" wrote:
>
> Besides the current draw of the heater you need to know the cutoff
> temperature. I was lucky, the switch used in our heaters was the same one
> used to protect most electric dryers so it was available and cheap ($6.50)
> locally at Appliance parts.
>
>
>
> - Chuck Wheeler-
>
> 1982 FC 31SB Fort Worth TX
>
> _____
>
> From: "WanderlodgeForum%40yahoogroups.com"
> [mailto:"WanderlodgeForum%40yahoogroups.com"] On Behalf Of David Ward
> Sent: Wednesday, December 09, 2009 8:33 PM
> To: "WanderlodgeForum%40yahoogroups.com"
> Subject: Re: [WanderlodgeForum] Re: Heater part
>
>
>
>
>
>
> Ron,
> I would think that given the wattage of the heater somebody like Grainger or
> Johnstone Supply should be able to come up with a high limit switch for it.
> Dave Ward
> 80FC31SB
> Mesa , AZ
>
> --- On Thu, 12/10/09, ronmarabito2002
wrote:
>
>
> From: ronmarabito2002
> Subject: [WanderlodgeForum] Re: Heater part
> To: "WanderlodgeForum%40yahoogroups.com"
> Date: Thursday, December 10, 2009, 2:26 AM
>
>
>
> They are not interested in selling anything for the old models. They only
> want to sell you a new heater unit complete. All I need is a less than $10
> part and I intend to find it somewhere.
>
> Thanks for your response.
>
> R.E. (Ron) Marabito, Dallas , TX 92WB40
>
> --- In WanderlodgeForum@ yahoogroups. com, "marvjeanm380"
> wrote:
> >
> > Ron:
> >
> > Cadet is located in Vancouver , WA . Their main part supplier is Reliable
> Parts.
They have a location in the Portland , OR area that I have bought
> from. Their number is Sales: (503) 239-6050. Give them a call and they will
> either sell you a part or can provide you with a current model electric
> heater. I bought one for a project and it was suprisingly cheap.
> >
> > Marv
> > 2004 M380
> > Ocean Shores , WA
> >
> >
> > --- In WanderlodgeForum@ yahoogroups. com, "ronmarabito2002" > > wrote:
> > >
> > > No temperature stamped on this one. Only markings are TOD-1-B1-B
> > >
> > > R.E. (Ron) Marabito, Dallas , TX 92WB40
> > >
> > > --- In WanderlodgeForum@ yahoogroups. . com, "Chuck Wheeler"
> wrote:
> > > >
> > > > Ron, if you look closely you should see a temperature stamped in it.
>
This
> > > > is the cutoff temperature that protects from overheating. They are
> > > > available locally here from Granger, although I get most of my parts
> from
> > > > Appliance parts Co in Richland hills.
> > > >
> > > >
> > > >
> > > > - Chuck Wheeler-
> > > >
> > > > 1982 FC 31SB Fort Worth TX
> > > >
> > > > _____
> > > >
> > > > From: WanderlodgeForum@ yahoogroups. com
> > > > [mailto:Wanderlodge Forum@ yahoogroups. com] On Behalf Of
> ronmarabito2002
> > > > Sent: Wednesday, December 09, 2009 11:21 AM
> > > > To: WanderlodgeForum@ yahoogroups. com
> > > > Subject: [WanderlodgeForum] Re: Heater part
> > > >
> > > >
> > > >

> > > >
> > > >
> > > > Yes Curt. How do we determine the correct size?
> > > >
> > > > R.E. (Ron) Marabito, Dallas , TX 92WB40
> > > >
> > > > --- In WanderlodgeForum@ ups.com>
> > > > yahoogroups. com, Curt Sprenger wrote:
> > > > >
> > > > > Ron,
> > > > >
> > > > > Look like this?
> > > > >
> > > > > http://www.thermodi
> > > > <http://www.thermodi
> <http://www.thermodi sc.com/productde tail.asp? ProductID= 1> sc.com/productde
> tail.asp? ProductID= 1>
> > > > sc.com/productdetai l.asp?ProductID= 1
> > > > >
> > > > > the site has lots of them.
> > > > >
> > > > >
> > > > > Curt Sprenger
> > > > > 1987 PT38 8V92 "MacAttack Racing"
> > > > > Anaheim Hills , CA
> > > > >
> > > > >
> > > > >
> > > > > On Wed, Dec 9, 2009 at 9:07 AM, ronmarabito2002
> wrote:
> > > > >
> > > > > >
> > > > > >
> > > > > > Studying this closer, it is probably a heat sensor or
> thermocouple.
> > > > > >
> > >
> > > R.E. (Ron) Marabito, Dallas , TX 92WB40
> > > > > >
> > > > > > --- In WanderlodgeForum@ > ups.com>
> > > > yahoogroups. comps.com>,
> > > > > > "ronmarabito2002" wrote:
> > > > > > >
> > > > > > > Hi all: Does anyone have a source for the round disc resistor or
> > > > > > capacitor that mounts in the top of the Bathroom Electric Heater
> for a
> > > > > > 92WB40. Mine has disintegrated and can't get heat.
> > > > > > >
> > > > > > > It has TOD 1-B1-B stamped on it.
> > > > > > >
> > > > > > > R.E. (Ron) Marabito, Dallas , TX
92WB40
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>

Quote this message in a reply
12-11-2009, 05:45
Post: #24
Heater part
Not the heaters that I am talking about. I am referring to the under dash and
bathroom electric heaters. No connection to Primus.

R.E. (Ron) Marabito, Dallas, TX 92WB40

--- In WanderlodgeForum@yahoogroups.com, Rick Davis wrote:
>
> Ron, the book for my Primus says that they are 140 degree sensors, and will
allow the toe kick fans to come on after the fluid gets to that temp.  But in
replacing one recently Bleakley put in one rated at 110 degrees.
>
> Rick Davis
> 1993 WBSA
> Loudon, TN
>
>
>
> ________________________________
> From: Chuck Wheeler
> To: WanderlodgeForum@yahoogroups.com
> Sent: Thu, December 10, 2009 10:48:57 AM
> Subject: RE: [WanderlodgeForum] Re: Heater part
>
> Â
> If I understand correctly we are talking about the safety cutoff switch.Â
They are not adjustable. You select one with the correct cutoff temperature.
> Â
> - Chuck Wheeler-
> 1982 FC 31SB Fort Worth TX
>
> ________________________________
>
> From:WanderlodgeForum@ yahoogroups. com [mailto: WanderlodgeForum@
yahoogroups. com ] On Behalf Of ronmarabito2002
> Sent: Thursday, December 10, 2009 8:23 AM
> To: WanderlodgeForum@ yahoogroups. com
> Subject: [WanderlodgeForum] Re: Heater part
> Â
> Â
> Chuck: What was your temp. set at? Was it automatic or manual?
>
> R.E. (Ron) Marabito, Dallas , TX 92WB40
>
> --- In WanderlodgeForum@ yahoogroups. com, "Chuck Wheeler"
wrote:
> >
> > Besides the current draw of the heater you need to know the cutoff
> > temperature. I was lucky, the switch used in our heaters was the same one
> > used to protect most electric dryers so it was available and cheap ($6.50)
> > locally at Appliance parts.
> >
> >
> >
> > - Chuck Wheeler-
> >
> > 1982 FC 31SB Fort Worth TX
> >
> > _____
> >
> > From: WanderlodgeForum@ yahoogroups. com
> > [mailto:WanderlodgeForum@ yahoogroups. com] On Behalf Of David Ward
> > Sent: Wednesday, December 09, 2009 8:33 PM
> > To: WanderlodgeForum@ yahoogroups. com
> > Subject: Re: [WanderlodgeForum] Re: Heater part
> >
> >
> >
> >
> >
> >
> > Ron,
> > I would think that given the wattage of the heater somebody like Grainger or
> > Johnstone Supply should be able to come up with a high limit switch for it.
> > Dave Ward
> > 80FC31SB
> > Mesa , AZ
> >
> > --- On Thu, 12/10/09, ronmarabito2002 wrote:
> >
> >
> > From: ronmarabito2002
> > Subject: [WanderlodgeForum] Re: Heater part
> > To: WanderlodgeForum@ yahoogroups. com
> > Date: Thursday, December 10, 2009, 2:26 AM
> >
> >
> >
> > They are not interested in selling anything for the old models. They only
> > want to sell you a new heater unit complete. All I need is a less than $10
> > part and I intend to find it somewhere.
> >
> > Thanks for your response.
> >
> > R.E. (Ron) Marabito, Dallas , TX 92WB40
> >
> > --- In WanderlodgeForum@ yahoogroups. com, "marvjeanm380"
> > wrote:
> > >
> > > Ron:
> > >
> > > Cadet is located in Vancouver , WA . Their main part supplier is Reliable
> > Parts. They have a location in the Portland , OR area that I have bought
> > from. Their number is Sales: (503) 239-6050. Give them a call and they will
> > either sell you a part or can provide you with a current model electric
> > heater. I bought one for a project and it was suprisingly cheap.
> > >
> > > Marv
> > > 2004 M380
> > > Ocean Shores , WA
> > >
> > >
> > > --- In WanderlodgeForum@ yahoogroups. com, "ronmarabito2002" > > > wrote:
> > > >
> > > > No temperature stamped on this one. Only markings are TOD-1-B1-B
> > > >
> > > > R.E. (Ron) Marabito, Dallas , TX 92WB40
> > > >
> > > > --- In WanderlodgeForum@ yahoogroups. . com, "Chuck Wheeler"
> > wrote:
> > > > >
> > > > > Ron, if you look closely you should see a temperature stamped in it.
> > This
> > > > > is the cutoff temperature that protects from overheating. They are
> > > > > available locally here from Granger, although I get most of my parts
> > from
> > > > > Appliance parts Co in Richland hills.
> > > > >
> > > > >
> > > > >
> > > > > - Chuck Wheeler-
> > > > >
> > > > > 1982 FC 31SB Fort Worth TX
> > > > >
> > > > > _____
> > > > >
> > > > > From: WanderlodgeForum@ yahoogroups. com
> > > > > [mailto:Wanderlodge Forum@ yahoogroups. com] On Behalf Of
> > ronmarabito2002
> > > > > Sent: Wednesday, December 09, 2009 11:21 AM
> > > > > To: WanderlodgeForum@ yahoogroups. com
> > > > > Subject: [WanderlodgeForum] Re: Heater part
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Yes Curt. How do we determine the correct size?
> > > > >
> > > > > R.E. (Ron) Marabito, Dallas , TX 92WB40
> > > > >
> > > > > --- In WanderlodgeForum@
> > > > > yahoogroups. com, Curt Sprenger wrote:
> > > > > >
> > > > > > Ron,
> > > > > >
> > > > > > Look like this?
> > > > > >
> > > > > > http://www.thermodi
> > > > > <http://www.thermodi
> > <http://www.thermodi sc.com/productde tail.asp? ProductID= 1>
sc.com/productde
> > tail.asp? ProductID= 1>
> > > > > sc.com/productdetai l.asp?ProductID= 1
> > > > > >
> > > > > > the site has lots of them.
> > > > > >
> > > > > >
> > > > > > Curt Sprenger
> > > > > > 1987 PT38 8V92 "MacAttack Racing"
> > > > > > Anaheim Hills , CA
> > > > > >
> > > > > >
> > > > > >
> > > > > > On Wed, Dec 9, 2009 at 9:07 AM, ronmarabito2002
> > wrote:
> > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Studying this closer, it is probably a heat sensor or
> > thermocouple.
> > > > > > >
> > > > > > > R.E. (Ron) Marabito, Dallas , TX 92WB40
> > > > > > >
> > > > > > > --- In WanderlodgeForum@ > > ups.com>
> > > > > yahoogroups. com,
> > > > > > > "ronmarabito2002" wrote:
> > > > > > > >
> > > > > > > > Hi all: Does anyone have a source for the round disc resistor or
> > > > > > > capacitor that mounts in the top of the Bathroom Electric Heater
> > for a
> > > > > > > 92WB40. Mine has disintegrated and can't get heat.
> > > > > > > >
> > > > > > > > It has TOD 1-B1-B stamped on it.
> > > > > > > >
> > > > > > > > R.E. (Ron) Marabito, Dallas , TX 92WB40
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
Quote this message in a reply
12-11-2009, 14:51
Post: #25
Heater part
The snap disk on one of my heaters went bad and the FO replaced it with a piece
of wire.

I thought it might be important, called Cadet and found they don't sell this as
a spare part. So I bought a new heater for $100+ and guess what? When the new
heater came, it doesn't have this overtemp snap disk any more, just a wire
running along where the disk was.

So obviously, Cadet doesn't think it is important any more either.

MoreyZ
99LXi41' FL
Quote this message in a reply
12-11-2009, 15:58
Post: #26
Heater part

If you really study it I bet you will find
that it has one of the overtemp switches that will not reset to replace the
snap disk switch. They are a little inline device. Cadet in wall
electric heaters were subject to a recall in the early 2000s due to overheating
and causing fires.

- Chuck Wheeler-

1982 FC 31SB Fort Worth TX



From:
WanderlodgeForum@yahoogroups.com [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of morey

Sent: Friday, December 11, 2009
8:52 PM

To:
WanderlodgeForum@yahoogroups.com

Subject: [WanderlodgeForum] Re:
Heater part



The snap disk on one of my heaters went bad and the FO
replaced it with a piece of wire.



I thought it might be important, called Cadet and found they don't sell this as
a spare part. So I bought a new heater for $100+ and guess what? When the new
heater came, it doesn't have this overtemp snap disk any more, just a wire
running along where the disk was.



So obviously, Cadet doesn't think it is important any more either.



MoreyZ

99LXi41' FL

Quote this message in a reply
12-12-2009, 14:40
Post: #27
Heater part
Morey,

The Cadet heaters in my '99 LXi were recalled in 2000 because they had a
overheat shutoff that had a reset button on the front. The new ones have this
thermal safety reset on the inside. It seems that people were resetting the
thermal cut off device without cleaning the dust out of the inside which, in
most all cases, was the cause of the cut off activating in the first place. The
new position forces you to open the heater to reset it and their thinking is; as
long as you have to open it to reset it, you will clean it at the same time.
Other than the position of the thermal protection device, they were identical so
I saved the old ones for more parts that I never needed!

I believe that you will find a different type of thermal cutoff in your new
heater. I don't believe Cadet makes a built in toe space heater without such a
device.

Rich D. '99LXi43' CT

--- In WanderlodgeForum@yahoogroups.com, "morey" wrote:
>
> The snap disk on one of my heaters went bad and the FO replaced it with a
piece of wire.
>
> I thought it might be important, called Cadet and found they don't sell this
as a spare part. So I bought a new heater for $100+ and guess what? When the
new heater came, it doesn't have this overtemp snap disk any more, just a wire
running along where the disk was.
>
> So obviously, Cadet doesn't think it is important any more either.
>
> MoreyZ
> 99LXi41' FL
>
Quote this message in a reply
12-12-2009, 15:08
Post: #28
Heater part
Rich,
I wonder if they will still replace my other heater. The new heater
instructions did say that the heater should be cleaned out every 6 months. I'll
get in touch with them on Monday and let everyone know.
Thanks,
MoreyZ
99LXi41' FL
> >
>
Quote this message in a reply
12-14-2009, 11:28
Post: #29
Heater part
Very interesting Morey. I might try this on mine and see if the wall thermostat
handles it O.K. by itself.

R.E. (Ron) Marabito, Dallas, tX 92WB40

--- In WanderlodgeForum@yahoogroups.com, "morey" wrote:
>
> The snap disk on one of my heaters went bad and the FO replaced it with a
piece of wire.
>
> I thought it might be important, called Cadet and found they don't sell this
as a spare part. So I bought a new heater for $100+ and guess what? When the
new heater came, it doesn't have this overtemp snap disk any more, just a wire
running along where the disk was.
>
> So obviously, Cadet doesn't think it is important any more either.
>
> MoreyZ
> 99LXi41' FL
>
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)