Stainless Steel Light Covers
|
12-09-2008, 06:10
Post: #11
|
|||
|
|||
Stainless Steel Light Covers
Novus plastic polish works wonders on the soft plastic 91 Ford
headlights that 'fog' over so badly. Certainly a lot faster and cheaper than replacing the headlight assemblies to get clear lenses. Got the tip from one of our suppliers that races drag boats. They use it to keep the canopy clear and it worked great on my fog covered headlights. You can buy it online at http://www.novuspolish.com/ It does not work as well on the hard plastic Volvo tail lights. Mike Bulriss 1991 WB40 "Texas Minivan" - with clear headlights now San Antonio, TX --- In WanderlodgeForum@yahoogroups.com, "Stephen Birtles" > > crest toothpaste works good also it is a polishing compound > stephen 7735fc > > > --- In WanderlodgeForum@yahoogroups.com, "Al Scudder" > wrote: > > > > Go to any auto store and see MOTHERS or MCQUIRES products one of > them has just come out with a new product for restorations on cars. I > have seen the demo and it works great on headlight covers > > > > Scooter > > 2000LX > > Ocqueoc, MI > > > > ----- Original Message ----- > > From: brad barton > > Sent: Sunday, December 07, 2008 8:44 AM > > To: wanderlodgeforum@yahoogroups.com > > Subject: RE: [WanderlodgeForum] Re: Stainless Steel Light Covers > > > > Wish I needed some. Any suggestions on polishing or replacing the > clear plastic headlight covers on the LXi? I thought about having a > couple pieces of tempered glass stuck in there. > > > > Brad Barton 00LXiDFW bbartonwx@ > > > > > > > > > > > > > > To: WanderlodgeForum@yahoogroups.com > > From: cape0001@ > > Date: Sun, 7 Dec 2008 03:22:31 +0000 > > Subject: [WanderlodgeForum] Re: Stainless Steel Light Covers > > > > > > yes it does > > Highly polished 18 gauge stainless steel > > Stephen 77fc35 > > > > --- In WanderlodgeForum@yahoogroups.com, "Eric Perplies" > > > > > > > > Stephen, > > > > > > Are this the cover that replaces the plastic cover between the two > > > headlights? > > > > > > Eric Perplies > > > 96' 42' WBWL > > > > > > > > > --- In WanderlodgeForum@yahoogroups.com, "Stephen Birtles" > > > > > > > > > > > Stainless Steel light Covers 91-97 available december 11 just in > time > > > > for Christmas > > > > From a Canadian Company but fabricated in the US > > > > dupreeproducts.com > > > > > > > > > > > > Stephen 77fc35 > > > > > > > > > > > > > > > > > > > > > Send e-mail anywhere. No map, no compass. Get your Hotmail® account now > > > |
|||
12-09-2008, 11:13
Post: #12
|
|||
|
|||
Stainless Steel Light Covers
You can also get most of the Novus products from most motorcycle
shops. They use it to clean and descratch the windscreens. --- In WanderlodgeForum@yahoogroups.com, "mbulriss" <mbulriss@...> wrote: > > Novus plastic polish works wonders on the soft plastic 91 Ford > headlights that 'fog' over so badly. Certainly a lot faster and > cheaper than replacing the headlight assemblies to get clear lenses. > Got the tip from one of our suppliers that races drag boats. They use > it to keep the canopy clear and it worked great on my fog covered > headlights. You can buy it online at http://www.novuspolish.com/ > It does not work as well on the hard plastic Volvo tail lights. > > Mike Bulriss > 1991 WB40 "Texas Minivan" - with clear headlights now > San Antonio, TX > > > --- In WanderlodgeForum@yahoogroups.com, "Stephen Birtles" > > > > > crest toothpaste works good also it is a polishing compound > > stephen 7735fc > > > > > > --- In WanderlodgeForum@yahoogroups.com, "Al Scudder" > > wrote: > > > > > > Go to any auto store and see MOTHERS or MCQUIRES products one of > > them has just come out with a new product for restorations on cars. > I > > have seen the demo and it works great on headlight covers > > > > > > Scooter > > > 2000LX > > > Ocqueoc, MI > > > > > > ----- Original Message ----- > > > From: brad barton > > > Sent: Sunday, December 07, 2008 8:44 AM > > > To: wanderlodgeforum@yahoogroups.com > > > Subject: RE: [WanderlodgeForum] Re: Stainless Steel Light Covers > > > > > > Wish I needed some. Any suggestions on polishing or replacing the > > clear plastic headlight covers on the LXi? I thought about having a > > couple pieces of tempered glass stuck in there. > > > > > > Brad Barton 00LXiDFW bbartonwx@ > > > > > > > > > > > > > > > > > > > > > To: WanderlodgeForum@yahoogroups.com > > > From: cape0001@ > > > Date: Sun, 7 Dec 2008 03:22:31 +0000 > > > Subject: [WanderlodgeForum] Re: Stainless Steel Light Covers > > > > > > > > > yes it does > > > Highly polished 18 gauge stainless steel > > > Stephen 77fc35 > > > > > > --- In WanderlodgeForum@yahoogroups.com, "Eric Perplies" > > > > > > > > > > > Stephen, > > > > > > > > Are this the cover that replaces the plastic cover between the > two > > > > headlights? > > > > > > > > Eric Perplies > > > > 96' 42' WBWL > > > > > > > > > > > > --- In WanderlodgeForum@yahoogroups.com, "Stephen Birtles" > > > > > > > > > > > > > > Stainless Steel light Covers 91-97 available december 11 just > in > > time > > > > > for Christmas > > > > > From a Canadian Company but fabricated in the US > > > > > dupreeproducts.com > > > > > > > > > > > > > > > Stephen 77fc35 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Send e-mail anywhere. No map, no compass. Get your Hotmail® > account now > > > > > > |
|||
12-09-2008, 11:54
Post: #13
|
|||
|
|||
Stainless Steel Light Covers
Thanks to all for those suggestions.
Brad Barton 00LXiDFW bbartonwx@... To: WanderlodgeForum@yahoogroups.com From: jcmace@... Date: Tue, 9 Dec 2008 23:13:16 +0000 Subject: [WanderlodgeForum] Re: Stainless Steel Light Covers
You can also get most of the Novus products from most motorcycle shops. They use it to clean and descratch the windscreens. --- In "WanderlodgeForum@yahoogroups.com", "mbulriss" <mbulriss@..<WBR>.> wrote: > > Novus plastic polish works wonders on the soft plastic 91 Ford > headlights that 'fog' over so badly. Certainly a lot faster and > cheaper than replacing the headlight assemblies to get clear lenses. > Got the tip from one of our suppliers that races drag boats. They use > it to keep the canopy clear and it worked great on my fog covered > headlights. You can buy it online at http://www.novuspol > It does not work as well on the hard plastic Volvo tail lights. > > Mike Bulriss > 1991 WB40 "Texas Minivan" - with clear headlights now > San Antonio, TX > > > --- In "WanderlodgeForum@yahoogroups.com", "Stephen Birtles" > > > > > crest toothpaste works good also it is a polishing compound > > stephen 7735fc > > > > > > --- In "WanderlodgeForum@yahoogroups.com", "Al Scudder" > > wrote: > > > > > > Go to any auto store and see MOTHERS or MCQUIRES products one of > > them has just come out with a new product for restorations on cars. > I > > have seen the demo and it works great on headlight covers > > > > > > Scooter > > > 2000LX > > > Ocqueoc, MI > > > > > > ----- Original Message ----- > > > From: brad barton > > > Sent: Sunday, December 07, 2008 8:44 AM > > > To: "wanderlodgeforum@yahoogroups.com" > > > Subject: RE: [WanderlodgeForum] Re: Stainless Steel Light Covers > > > > > > Wish I needed some. Any suggestions on polishing or replacing the > > clear plastic headlight covers on the LXi? I thought about having a > > couple pieces of tempered glass stuck in there. > > > > > > Brad Barton 00LXiDFW bbartonwx@ > > > > > > > > > > > > > > > > > > > > > To: "WanderlodgeForum@yahoogroups.com" > > > From: cape0001@ > > > Date: Sun, 7 Dec 2008 03:22:31 +0000 > > > Subject: [WanderlodgeForum] Re: Stainless Steel Light Covers > > > > > > > > > yes it does > > > Highly polished 18 gauge stainless steel > > > Stephen 77fc35 > > > > > > --- In "WanderlodgeForum@yahoogroups.com", "Eric Perplies" > > > > > > > > > > > Stephen, > > > > > > > > Are this the cover that replaces the plastic cover between the > two > > > > headlights? > > > > > > > > Eric Perplies > > > > 96' 42' WBWL > > > > > > > > > > > > --- In "WanderlodgeForum@yahoogroups.com", "Stephen Birtles" > > > > > > > > > > > > > > Stainless Steel light Covers 91-97 available december 11 just > in > > time > > > > > for Christmas > > > > > From a Canadian Company but fabricated in the US > > > > > dupreeproducts. > > > > > > > > > > > > > > > Stephen 77fc35 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Send e-mail anywhere. No map, no compass. Get your Hotmail® > account now > > > > > > Send e-mail anywhere. No map, no compass. Get your Hotmail® account now. |
|||
12-09-2008, 15:39
Post: #14
|
|||
|
|||
Stainless Steel Light Covers
Mike, I tried polish , tooth paste, wax, and even had a car lot
detailer do his majic on the BB plastic lenzes of my 94pt. I then replaced the headlight fixtures with two sets of 87? ford truck head lights Tim found on Ebay. I think it ended up costing $180.for both sets. Ford wanted over $400 for the parts. took some time to install (7 hours?) looks much better but now after 18 months the chrome over plastic on the knockoff units looks screwed up (on close inspection). for the Time involved to make the repair I would have gone with Ford replacement parts. GregoryO'Connor ofTim&Greg 94ptCa --- In WanderlodgeForum@yahoogroups.com, "mbulriss" <mbulriss@...> wrote: > > Novus plastic polish works wonders on the soft plastic 91 Ford > headlights that 'fog' over so badly. Certainly a lot faster and > cheaper than replacing the headlight assemblies to get clear lenses. > Got the tip from one of our suppliers that races drag boats. They use > it to keep the canopy clear and it worked great on my fog covered > headlights. You can buy it online at http://www.novuspolish.com/ > It does not work as well on the hard plastic Volvo tail lights. > > Mike Bulriss > 1991 WB40 "Texas Minivan" - with clear headlights now > San Antonio, TX > |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)