Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Radio Antenna
06-07-2008, 05:34
Post: #1
Radio Antenna
Does any one know where you can get a radio antenna for the roof. The old one is a Larsen ?
Don Spithaler
89SP 36'
Butler, PA
Quote this message in a reply
06-07-2008, 06:55
Post: #2
Radio Antenna
Larsen is now Radiall/Larsen. You can buy antennas or any part of
the antenna you have. For example, if you only need the stainless
steel rod you can buy that rather than buy the whole antenna.

Here is the first hit I had on Google as a source.

http://www.wb0w.com/larsen/larsen.htm

I know nothing about the dealer. Larsen is probably the top of the
line in UHF/VHF and CB antennas. I have been using them since the
late 60s in ham radio applications.

Marv - KG7V
2004 M380
Ocean Shores, WA

--- In WanderlodgeForum@yahoogroups.com, "Donald Spithaler"
wrote:
>
> Does any one know where you can get a radio antenna for the roof.
The old
> one is a Larsen ?
> Don Spithaler
> 89SP 36'
> Butler, PA
>
Quote this message in a reply
06-07-2008, 15:37
Post: #3
Radio Antenna
Thanks Marv I'll check that out. My base is gone on the antenna up front. The bottom rusted out.
Don Spithaler
89 SP 36'
Butler, PA

On Sat, Jun 7, 2008 at 2:55 PM, Marv & Jean <"marvwheeler@nwlink.com"> wrote:



Larsen is now Radiall/Larsen. You can buy antennas or any part of

the antenna you have. For example, if you only need the stainless

steel rod you can buy that rather than buy the whole antenna.



Here is the first hit I had on Google as a source.



http://www.wb0w.com/larsen/larsen.htm



I know nothing about the dealer. Larsen is probably the top of the

line in UHF/VHF and CB antennas. I have been using them since the

late 60s in ham radio applications.



Marv - KG7V

2004 M380

Ocean Shores, WA



--- In "WanderlodgeForum%40yahoogroups.com", "Donald Spithaler"

wrote:

>

> Does any one know where you can get a radio antenna for the roof.

The old

> one is a Larsen ?

> Don Spithaler

> 89SP 36'

> Butler, PA

>




Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)