water problem

[erniecarpet@...]

I had the same thing happen. Thought it was the sporlan valve- ordered some
from Stephen Birtles-- prompt service- Ernie-83PT40 in Texas


[Non-text portions of this message have been removed]

[Rob Robinson]

Not sure about your rig setup for water but on mine I have to flip the
switch to allow water to flow into tank. When the tank is full I have to
flip the switch off or the water pumps will not pump water out of the tank.

Rob Robinson
1994 WLWB
Victoria, BC

-----Original Message-----
From: WanderlodgeForum@yahoogroups.com
[mailto:WanderlodgeForum@yahoogroups.com]On Behalf Of mortyheller
Sent: Sunday, May 29, 2005 4:53 PM
To: WanderlodgeForum@yahoogroups.com
Subject: [WanderlodgeForum] water problem


i hooked up to city water and had the fill switch off and the water
ran into the tank. when i turn the pump on with the tank full the pump
works but i don't get any water. any idears what can be wrong??

morty heller 87 pt 40 jax. fl in ohio





----------------------------------------------------------------------------
--
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/

b.. To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.322 / Virus Database: 267.2.0 - Release Date: 5/27/2005


[Non-text portions of this message have been removed]

[mortyheller]

i hooked up to city water and had the fill switch off and the water
ran into the tank. when i turn the pump on with the tank full the pump
works but i don't get any water. any idears what can be wrong??

morty heller 87 pt 40 jax. fl in ohio

[Jeff Miller]

Sporlan valve stuck open. You can try turning the fill switch on with
water flowing from the hose, see if a piece of debris is holding the
valve open, usually need to replace the diaphragm (rebuild kit).

- Jeff Miller
http://www.wanderlodge.net


--- In WanderlodgeForum@yahoogroups.com, "mortyheller"
<mortyheller@y...> wrote:
> i hooked up to city water and had the fill switch off and the water
> ran into the tank. when i turn the pump on with the tank full the
pump
> works but i don't get any water. any idears what can be wrong??
>
> morty heller 87 pt 40 jax. fl in ohio

[sfedeli3]

Hi Morty,

Make sure that your air purge switch is off and that the hot water
tank fill/drain switch is in the proper position. If these two items
are OK, then it probably is one of the sporlan valves acting up.

Shane Fedeli
85PT40
Hershey, PA

--- In WanderlodgeForum@yahoogroups.com, "mortyheller"
<mortyheller@y...> wrote:
> i hooked up to city water and had the fill switch off and the water
> ran into the tank. when i turn the pump on with the tank full the
pump
> works but i don't get any water. any idears what can be wrong??
>
> morty heller 87 pt 40 jax. fl in ohio