Rust removal question

[Bob Wold]

My father inlaw (deceased) placed old rusty tools is some fluid and
soaked them for a few months to remove the rust. He was known to be
pretty cheap (a good thing) so he probably used something saved from RV
maintanence. Any ideas of what it may have been? Brake fluid, ATF or
diesel fuel? Someone left my favorite wrenchs out in the rain :-)
.....Bob

[vmarshall@...]

Bob, I have found several products that are great for rust removal. The best
ones are
not cheap. Evapo-Rust is probably the best but cost around $20.00 a gallon.
However,
if you want to get out cheap, buy some Naval Jelly at your local hardware store.
Cover
the rusty spots with the jelly, let the tools sit overnight then clean them with
a cloth and
water. Don't forget to dry the water off or the rust will re-appear.

Good luck,

Gene Marshall, Dickinson, Texas 1988 PT40 WB

[randydupree]

not brake fliuid!! randy
----- Original Message -----
From: Bob Wold
To: WanderlodgeForum@yahoogroups.com
Sent: Monday, May 02, 2005 1:30 AM
Subject: [WanderlodgeForum] Rust removal question


My father inlaw (deceased) placed old rusty tools is some fluid and
soaked them for a few months to remove the rust. He was known to be
pretty cheap (a good thing) so he probably used something saved from RV
maintanence. Any ideas of what it may have been? Brake fluid, ATF or
diesel fuel? Someone left my favorite wrenchs out in the rain :-)
.....Bob





------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/

b.. To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]

[Curt Sprenger]

I use pool acid. It's cheap and available at any pool supply. Takes only
a few minutes. Rinse the tools off with water, towel dry (or air
compressor). Use WD40 to coat the tools and wipe that off. Be careful
with the pool acid.

Curt Sprenger ‘87PT38, Anaheim, Calif.

[John Suter]

Hi Bob,

Others have answered the question of getting the
initial rust off; but I'll bet your father-in-law
soaked them in turpentine (just as my dad and gramps
did)... now to keep rust from re-appearing while in
your toolbox.

Place among the tools in the toolbox, a couple of
sticks of the old-fashioned black-board chalk you may
remember your grade school teacher using.

John & Amy Suter
(With appropriate credit to my wife, who tells folks I
married her because she was the only gal that had her
own tools and toolbox; still does, and none have
rust.) LOL


--- Bob Wold wrote:
> My father inlaw (deceased) placed old rusty tools is
> some fluid and
> soaked them for a few months to remove the rust. He
> was known to be
> pretty cheap (a good thing) so he probably used
> something saved from RV
> maintanence. Any ideas of what it may have been?
> Brake fluid, ATF or
> diesel fuel? Someone left my favorite wrenchs out
> in the rain :-)
> .....Bob
>
>
>
>


__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

[Bob Wold]

Thanks all for the info ..... Bob

--- In WanderlodgeForum@yahoogroups.com, "Bob Wold" wrote:
> My father inlaw (deceased) placed old rusty tools is some fluid and
> soaked them for a few months to remove the rust.

[Jeff Miller]

Hardware store, "Naval Jelly", strong acid in a gel form you brush on.

- Jeff Miller
http://www.wanderlodge.net
http://www.millercoachworks.com


--- In WanderlodgeForum@yahoogroups.com, "Bob Wold"
wrote:
> Thanks all for the info ..... Bob
>
> --- In WanderlodgeForum@yahoogroups.com, "Bob Wold"
wrote:
> > My father inlaw (deceased) placed old rusty tools is some fluid
and
> > soaked them for a few months to remove the rust.