Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dually Valve Stems
12-19-2007, 22:48
Post: #1
Dually Valve Stems
In a couple of hours I am having new custom dually valve stems with
stabilizers installed on the coach. These should allow for quality
application of the pressure pro senders on my coach. I purchased part
number kit DL4AAOS. It includes, 2#VH51010, 2#TV513 and 2#H2225 for
old style Alcoa wheels. I will let you know how it goes.
http://www.borgtiresupply.com 1-800-300-2674 Tujunga, CA

Leroy Eckert
1990 WB-40 Smoke N Mirrors
Dahlonega, GA
Royale Conversion
Quote this message in a reply
12-20-2007, 03:26
Post: #2
Dually Valve Stems
Leroy,

Keep us posted.

I tried valve extentions and extention supports,
for Accuride rims.
I was not satisfied. The rubber supports were loose
and smaller than the rim holes.

Bill 88 FC Michigan


--- In WanderlodgeForum@yahoogroups.com, "Leroy A. Eckert"
wrote:
>
> In a couple of hours I am having new custom dually valve stems with
> stabilizers installed on the coach. These should allow for quality
> application of the pressure pro senders on my coach. I purchased
part
> number kit DL4AAOS. It includes, 2#VH51010, 2#TV513 and 2#H2225 for
> old style Alcoa wheels. I will let you know how it goes.
> http://www.borgtiresupply.com 1-800-300-2674 Tujunga, CA
>
> Leroy Eckert
> 1990 WB-40 Smoke N Mirrors
> Dahlonega, GA
> Royale Conversion
>
Quote this message in a reply
12-20-2007, 04:37
Post: #3
Dually Valve Stems
Bill, got them installed in about an hour. They fit as advertised. I think I
will order two more rubber grommets. I installed the rubber grommets on the
inside dual but think I want to double up just because. It's probably overkill
and not needed because everything is tight.
No more leaky extensions and busted knuckles, I hope.

Leroy Eckert
1990 WB-40 Smoke N Mirrors
Dahlonega, GA
Royale Conversion

pattypape wrote:
Leroy,

Keep us posted.

I tried valve extentions and extention supports,
for Accuride rims.
I was not satisfied. The rubber supports were loose
and smaller than the rim holes.

Bill 88 FC Michigan

--- In WanderlodgeForum@yahoogroups.com, "Leroy A. Eckert"
wrote:
>
> In a couple of hours I am having new custom dually valve stems with
> stabilizers installed on the coach. These should allow for quality
> application of the pressure pro senders on my coach. I purchased
part
> number kit DL4AAOS. It includes, 2#VH51010, 2#TV513 and 2#H2225 for
> old style Alcoa wheels. I will let you know how it goes.
> http://www.borgtiresupply.com 1-800-300-2674 Tujunga, CA
>
> Leroy Eckert
> 1990 WB-40 Smoke N Mirrors
> Dahlonega, GA
> Royale Conversion
>






---------------------------------
Never miss a thing. Make Yahoo your homepage.

[Non-text portions of this message have been removed]
Quote this message in a reply
12-20-2007, 06:12
Post: #4
Dually Valve Stems
Leroy,
I put the same ones on my tires and so for have worked great.
Howard T., Camilla, Ga. 86 PT40

----- Original Message -----
From: Leroy A. Eckert
To: WanderlodgeForum@yahoogroups.com
Sent: Thursday, December 20, 2007 5:48 AM
Subject: [WanderlodgeForum] Dually Valve Stems


In a couple of hours I am having new custom dually valve stems with
stabilizers installed on the coach. These should allow for quality
application of the pressure pro senders on my coach. I purchased part
number kit DL4AAOS. It includes, 2#VH51010, 2#TV513 and 2#H2225 for
old style Alcoa wheels. I will let you know how it goes.
http://www.borgtiresupply.com 1-800-300-2674 Tujunga, CA

Leroy Eckert
1990 WB-40 Smoke N Mirrors
Dahlonega, GA
Royale Conversion






------------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.486 / Virus Database: 269.17.4/1188 - Release Date: 12/17/2007
2:13 PM


[Non-text portions of this message have been removed]
Quote this message in a reply
12-20-2007, 07:42
Post: #5
Dually Valve Stems
Howard,
Did you install the grommet on the inside or outside dual wheel?
It's good to know yours are working fine.

Leroy Eckert
1990 WB-40 Smoke N Mirrors
Dahlonega, GA
Royale Conversion
Bone chilling rain and cold for a FL boy

"Howard O. Truitt" wrote:
Leroy,
I put the same ones on my tires and so for have worked great.
Howard T., Camilla, Ga. 86 PT40

----- Original Message -----
From: Leroy A. Eckert
To: WanderlodgeForum@yahoogroups.com
Sent: Thursday, December 20, 2007 5:48 AM
Subject: [WanderlodgeForum] Dually Valve Stems

In a couple of hours I am having new custom dually valve stems with
stabilizers installed on the coach. These should allow for quality
application of the pressure pro senders on my coach. I purchased part
number kit DL4AAOS. It includes, 2#VH51010, 2#TV513 and 2#H2225 for
old style Alcoa wheels. I will let you know how it goes.
http://www.borgtiresupply.com 1-800-300-2674 Tujunga, CA

Leroy Eckert
1990 WB-40 Smoke N Mirrors
Dahlonega, GA
Royale Conversion

----------------------------------------------------------

No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.486 / Virus Database: 269.17.4/1188 - Release Date: 12/17/2007
2:13 PM

[Non-text portions of this message have been removed]






---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.

[Non-text portions of this message have been removed]
Quote this message in a reply
12-20-2007, 09:31
Post: #6
Dually Valve Stems
Leroy
On the outside
Howard

----- Original Message -----
From: Leroy Eckert
To: WanderlodgeForum@yahoogroups.com
Sent: Thursday, December 20, 2007 2:42 PM
Subject: Re: [WanderlodgeForum] Dually Valve Stems


Howard,
Did you install the grommet on the inside or outside dual wheel?
It's good to know yours are working fine.

Leroy Eckert
1990 WB-40 Smoke N Mirrors
Dahlonega, GA
Royale Conversion
Bone chilling rain and cold for a FL boy

"Howard O. Truitt" wrote: Leroy,
I put the same ones on my tires and so for have worked great.
Howard T., Camilla, Ga. 86 PT40

----- Original Message -----
From: Leroy A. Eckert
To: WanderlodgeForum@yahoogroups.com
Sent: Thursday, December 20, 2007 5:48 AM
Subject: [WanderlodgeForum] Dually Valve Stems

In a couple of hours I am having new custom dually valve stems with
stabilizers installed on the coach. These should allow for quality
application of the pressure pro senders on my coach. I purchased part
number kit DL4AAOS. It includes, 2#VH51010, 2#TV513 and 2#H2225 for
old style Alcoa wheels. I will let you know how it goes.
http://www.borgtiresupply.com 1-800-300-2674 Tujunga, CA

Leroy Eckert
1990 WB-40 Smoke N Mirrors
Dahlonega, GA
Royale Conversion

----------------------------------------------------------

No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.486 / Virus Database: 269.17.4/1188 - Release Date: 12/17/2007
2:13 PM

[Non-text portions of this message have been removed]





---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.

[Non-text portions of this message have been removed]






------------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.486 / Virus Database: 269.17.4/1188 - Release Date: 12/17/2007
2:13 PM


[Non-text portions of this message have been removed]
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)