Camloc fasteners

[Gus]

Greetings to all. I would like to replace the
fasteners that hold the electrical panel outside the front of the bus. Does
anyone have any sources for these. Also, If you have the size
of the fastener it would be very helpful.

I’m hoping to stay away from aviation sources because they
can get costly for “screws”

Thank you.

Gus Rodriguez

89pt40 8v92

Pearland, Tx

[Pete Masterson]

Aircraft Spruce <http://www.aircraftspruce.com> sells Camloc fasteners like those used on the front panel. There's a number (you'll need a magnifying glass) on the head of the fastener that tells you the size -- but check against the measurements as the number is very hard to read (at least it was on my fasteners).

You need a special tool to install them -- but if you're clever and have 3 hands you can do it without the tool. (I was only replacing one that I had broken, so I didn't get the tool.) If you wish to replace more than one or two, the tool is well worth having.

I don't recall the camlocs as being all that expensive. I bought 2 or 3 "just in case" because the shipping was more than the fastener. Not _all_ aircraft parts are expensive.

Pete Masterson

'95 Blue Bird Wanderlodge WBDA 42 (For Sale)

<http://www.aeonix.biz/BBforsale.html>

El Sobrante CA

"aeonix1@mac.com"

On Dec 18, 2008, at 10:14 AM, Gus wrote:

Greetings to all.  I would like to replace the fasteners that hold the electrical panel outside the front  of the bus. Does anyone have any sources for these.   Also, If you  have the size of the fastener it would be very helpful.

I’m hoping to stay away from aviation sources because they can get costly for “screws”

Thank you.

 

Gus Rodriguez

89pt40 8v92

Pearland, Tx  

__._,_._

[jim riordan]

If I remember correctly /steve //birtles might be able to help you "cape0001@hotmail.com"

jim riordan

Gus wrote:

Greetings to all. I would like to replace the fasteners that hold the electrical panel outside the front of the bus. Does anyone have any sources for these. Also, If you have the size of the fastener it would be very helpful.

I’m hoping to stay away from aviation sources because they can get costly for “screws”

Thank you.

Gus Rodriguez

89pt40 8v92

Pearland, Tx

[Hisham Amaral]

--- In WanderlodgeForum@yahoogroups.com, jim riordan
wrote:
>
> If I remember correctly /steve //birtles might be able to help you
cape0001@...
>
> jim riordan
>
> Gus wrote:
> Greetings to all. I would like to replace the
fasteners that hold the electrical panel outside the front of the
bus. Does anyone have any sources for these. Also, If you have the
size of the fastener it would be very helpful.
> I'm hoping to stay away from aviation sources because they can
get costly for "screws"
> Thank you.
>
> Gus Rodriguez
> 89pt40 8v92
> Pearland, Tx
>
Gus

If you have an aircraft supply place in your area they can lead you
to where you can buy camloc fasteners. Comlocs are used extensively
in aircrafts. I am sorry I cannot get that info from where we are. I
will have to Wait till Monday to get you a company name that can help
you with size. I recommend using stainless steel that would
eliminate the rust problems.

Hisham and Sue Amaral
97 WLWB 43'
Titusville FL.
dukeflyer@...

[Gus]

Thanks to all for your input on the Camloc fasteners. I
found a company on the net that sells them for a “reasonable price”
($3.50) compared to others. (www.milspecproducts.com)
They sell all sizes. The part number for my bus is 27s3-14s.
It requires 20 camlocs. 14 is the length of the stud stamped on the head
and S stands for stainless steel. I decided to go with stainless for
longevity and the price difference is pennies.

Gus Rodriguez

89pt40 8v92

Pearland, Texas

From:
WanderlodgeForum@yahoogroups.com [mailto:WanderlodgeForum@yahoogroups.com] On
Behalf Of Hisham Amaral

Sent: Saturday, December 20, 2008 7:27 PM

To: WanderlodgeForum@yahoogroups.com

Subject: [WanderlodgeForum] Re: Camloc fasteners

--- In "WanderlodgeForum%40yahoogroups.com",
jim riordan

wrote:

>

> If I remember correctly /steve //birtles might be able to help you

cape0001@...

>

> jim riordan

>

> Gus wrote:

> Greetings to all. I would like to replace the

fasteners that hold the electrical panel outside the front of the

bus. Does anyone have any sources for these. Also, If you have the

size of the fastener it would be very helpful.

> I'm hoping to stay away from aviation sources because they can

get costly for "screws"

> Thank you.

>

> Gus Rodriguez

> 89pt40 8v92

> Pearland, Tx

>

Gus



If you have an aircraft supply place in your area they can lead you

to where you can buy camloc fasteners. Comlocs are used extensively

in aircrafts. I am sorry I cannot get that info from where we are. I

will have to Wait till Monday to get you a company name that can help

you with size. I recommend using stainless steel that would

eliminate the rust problems.



Hisham and Sue Amaral

97 WLWB 43'

Titusville FL.

"dukeflyer%40sbcglobal.net"