m380 headlight covers

[Mark]

Does anyone know where you can purchuse headlight covers for M380's
Mark DeVries

[Al Scudder]

Mark, I can't tell you where tog go for the headlightcovers BUT if you are replacing because they are dull and cloudey try a product from "mother" or Meguies" that will polish the surface before yopu buy the parts

Scooter

2000LX OcQueoc, MI

---

To: WanderlodgeForum@yahoogroups.com
From: grandpa5426@...
Date: Fri, 6 Nov 2009 17:17:27 +0000
Subject: [WanderlodgeForum] m380 headlight covers

Does anyone know where you can purchuse headlight covers for M380's
Mark DeVries

[Curt Sprenger]

If you have a buffer...Sand the covers with WET sand paper, first 600 grit, then 800, 1000, 1500...then use your buffer at 1400 RPM and very fine polish and you'll have covers that look as good as new.


Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA

On Sat, Nov 7, 2009 at 1:25 PM, Al Scudder <"al_scudder@msn.com"> wrote:

 

Mark, I can't tell you where tog go for the headlightcovers BUT if you are replacing because they are dull and cloudey try a product from "mother" or Meguies" that will polish the surface before yopu buy the parts


Scooter

2000LX OcQueoc, MI

 

---

To: "WanderlodgeForum@yahoogroups.com"
From: "grandpa5426@yahoo.com"
Date: Fri, 6 Nov 2009 17:17:27 +0000

Subject: [WanderlodgeForum] m380 headlight covers

 

Does anyone know where you can purchuse headlight covers for M380's
Mark DeVries

[mbulriss]

I have not tried the Mother's or Meguire's. I use Novus platic polish products
on the Ford headlights on my 91 and it does a *really* good job. Makes them
look like new. See http://www.novuspolish.com
I was alerted to it by our metal fabrication vendor, who runs a drag boat and
they use it on the boat's windshield which gets beat up pretty bad from the
spray.

Mike Bulriss
1991 WB40 "Texas Minivan"
San Antonio, TX

--- In WanderlodgeForum@yahoogroups.com, Al Scudder wrote:
>
>
> Mark, I can't tell you where tog go for the headlightcovers BUT if you are
replacing because they are dull and cloudey try a product from "mother" or
Meguies" that will polish the surface before yopu buy the parts
>
> Scooter
>
> 2000LX OcQueoc, MI
>
>
>
>
> To: WanderlodgeForum@yahoogroups.com
> From: grandpa5426@...
> Date: Fri, 6 Nov 2009 17:17:27 +0000
> Subject: [WanderlodgeForum] m380 headlight covers
>
>
>
>
>
> Does anyone know where you can purchuse headlight covers for M380's
> Mark DeVries
>

[birdbrainm380]

Mark:

I believe you can get them from Parliament Coach in Clearwater, FL. I imagine
that the finish has pealed off of yours?

J. Haney
04 M380

--- In WanderlodgeForum@yahoogroups.com, "Mark" wrote:
>
> Does anyone know where you can purchuse headlight covers for M380's
> Mark DeVries
>

[Mark]

Thanks for the responses on the peeling Headlights!I did call Parliament Coach
-they sell them for $360.00 each. So I tried the polish and sanding method and
they look good as new. Thanks,Mark

--- In WanderlodgeForum@yahoogroups.com, "birdbrainm380"
wrote:
>
> Mark:
>
> I believe you can get them from Parliament Coach in Clearwater, FL. I imagine
that the finish has pealed off of yours?
>
> J. Haney
> 04 M380
>
> --- In WanderlodgeForum@yahoogroups.com, "Mark" wrote:
> >
> > Does anyone know where you can purchuse headlight covers for M380's
> > Mark DeVries
> >
>