Member Funded
Link Directory
Wanderlodge Trader
Document Library
User Locations
Gallery
Calendar
Wanderlodge Gurus - The Member Funded Wanderlodge Forum
/
Yahoo Groups Archive
/
WanderlodgeForum 
/
80FC33 cruise control options
/
80FC33 cruise control options
|
80FC33 cruise control options
|
|
04-21-2005, 03:03
Post: #1
|
|||
|
|||
|
80FC33 cruise control options
Has anyone experimented with different options for the old vacuum type
cruise controls on the older birds? Mine is missing the drive shaft magnets and I don't know if it works beyond that. I would like to replace it and have been informed of one type. Any other replacements out there worth investigation at a 'not to terrible' price? ALso if you have an old vacuum system or the magnet pickups or info on them, please let me know..... Thanks Todd Tumbleston 80FC33, Key Largo Fl |
|||
|
![[+]](http://www.wanderlodgegurus.com/images/collapse_collapsed.gif)
|
04-21-2005, 13:36
Post: #2
|
|||
|
|||
|
80FC33 cruise control options
--- In WanderlodgeForum@yahoogroups.com, "ernesttumbleston"
I put new magnets on mine and it works just fine. Crit in Pigeon Forge, Tenn. '80FC33 > > Has anyone experimented with different options for the old vacuum type > cruise controls on the older birds? Mine is missing the drive shaft > magnets and I don't know if it works beyond that. I would like to > replace it and have been informed of one type. Any other replacements > out there worth investigation at a 'not to terrible' price? ALso if you > have an old vacuum system or the magnet pickups or info on them, please > let me know..... > > Thanks Todd Tumbleston 80FC33, Key Largo Fl |
|||
|
|
|
04-21-2005, 14:44
Post: #3
|
|||
|
|||
|
80FC33 cruise control options
That's ironic, the original magnets work great for my King Cruise or what ever.
Mike Hohnstein Germantown, WI ----- Original Message ----- From: crittenden_bliss To: WanderlodgeForum@yahoogroups.com Sent: Thursday, April 21, 2005 8:36 PM Subject: [WanderlodgeForum] Re: 80FC33 cruise control options --- In WanderlodgeForum@yahoogroups.com, "ernesttumbleston" I put new magnets on mine and it works just fine. Crit in Pigeon Forge, Tenn. '80FC33 > > Has anyone experimented with different options for the old vacuum type > cruise controls on the older birds? Mine is missing the drive shaft > magnets and I don't know if it works beyond that. I would like to > replace it and have been informed of one type. Any other replacements > out there worth investigation at a 'not to terrible' price? ALso if you > have an old vacuum system or the magnet pickups or info on them, please > let me know..... > > Thanks Todd Tumbleston 80FC33, Key Largo Fl ------------------------------------------------------------------------------ Yahoo! Groups Links a.. To visit your group on the web, go to: http://groups.yahoo.com/group/WanderlodgeForum/ b.. To unsubscribe from this group, send an email to: WanderlodgeForum-unsubscribe@yahoogroups.com c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. [Non-text portions of this message have been removed] |
|||
|
|
|
04-21-2005, 15:50
Post: #4
|
|||
|
|||
|
80FC33 cruise control options
The magnets are available from NAPA. For a couple of dollars it is a
cheep test. I always wrap a nylon tie around them and do not just rely on the sticky backing. -----Original Message----- From: WanderlodgeForum@yahoogroups.com [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of ernesttumbleston Sent: Thursday, April 21, 2005 10:03 AM To: WanderlodgeForum@yahoogroups.com Subject: [WanderlodgeForum] 80FC33 cruise control options Has anyone experimented with different options for the old vacuum type cruise controls on the older birds? Mine is missing the drive shaft magnets and I don't know if it works beyond that. I would like to replace it and have been informed of one type. Any other replacements out there worth investigation at a 'not to terrible' price? ALso if you have an old vacuum system or the magnet pickups or info on them, please let me know..... Thanks Todd Tumbleston 80FC33, Key Largo Fl _____ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/WanderlodgeForum/ * To unsubscribe from this group, send an email to: WanderlodgeForum-unsubscribe@yahoogroups.com * Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service. [Non-text portions of this message have been removed] |
|||
|
|
|
04-22-2005, 00:58
Post: #5
|
|||
|
|||
|
80FC33 cruise control options
Could your please provide me with the information on the number of magnets and
how you attached them and where you got them from and where and when and what and ect..... Thanks.Todd Tumbleston, 80FC33, Key Largo FL crittenden_bliss --- In WanderlodgeForum@yahoogroups.com, "ernesttumbleston" I put new magnets on mine and it works just fine. Crit in Pigeon Forge, Tenn. '80FC33 > > Has anyone experimented with different options for the old vacuum type > cruise controls on the older birds? Mine is missing the drive shaft > magnets and I don't know if it works beyond that. I would like to > replace it and have been informed of one type. Any other replacements > out there worth investigation at a 'not to terrible' price? ALso if you > have an old vacuum system or the magnet pickups or info on them, please > let me know..... > > Thanks Todd Tumbleston 80FC33, Key Largo Fl --------------------------------- Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/WanderlodgeForum/ To unsubscribe from this group, send an email to: WanderlodgeForum-unsubscribe@yahoogroups.com Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com [Non-text portions of this message have been removed] |
|||
|
|
|
04-22-2005, 01:20
Post: #6
|
|||
|
|||
|
80FC33 cruise control options
The magnets are a hardware store item. 1/4" square by 1/8" thick will be fine.
Mount 180 degrees apart in line with pick up coil. Attach to drive shaft with epoxy and secure with common wire tie. It's ok to use two wire ties if one long enough isn't available. The pick up coil should be 1/4" away from the shaft. If not enough signal is evident, place magnets 90 degrees apart on drive shaft. My Cruise King kit came with 4 magnets but I tried using the original two magnets and original pick up coil, works fine. A word of caution regarding the Cruise King, it requies a dedicated 20 amp circuit. Mike Hohnstein Germantown, WI ----- Original Message ----- From: Ernest Tumbleston To: WanderlodgeForum@yahoogroups.com Sent: Friday, April 22, 2005 7:58 AM Subject: Re: [WanderlodgeForum] Re: 80FC33 cruise control options Could your please provide me with the information on the number of magnets and how you attached them and where you got them from and where and when and what and ect..... Thanks.Todd Tumbleston, 80FC33, Key Largo FL crittenden_bliss --- In WanderlodgeForum@yahoogroups.com, "ernesttumbleston" I put new magnets on mine and it works just fine. Crit in Pigeon Forge, Tenn. '80FC33 > > Has anyone experimented with different options for the old vacuum type > cruise controls on the older birds? Mine is missing the drive shaft > magnets and I don't know if it works beyond that. I would like to > replace it and have been informed of one type. Any other replacements > out there worth investigation at a 'not to terrible' price? ALso if you > have an old vacuum system or the magnet pickups or info on them, please > let me know..... > > Thanks Todd Tumbleston 80FC33, Key Largo Fl --------------------------------- Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/WanderlodgeForum/ To unsubscribe from this group, send an email to: WanderlodgeForum-unsubscribe@yahoogroups.com Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com [Non-text portions of this message have been removed] ------------------------------------------------------------------------------ Yahoo! Groups Links a.. To visit your group on the web, go to: http://groups.yahoo.com/group/WanderlodgeForum/ b.. To unsubscribe from this group, send an email to: WanderlodgeForum-unsubscribe@yahoogroups.com c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. [Non-text portions of this message have been removed] |
|||
|
|
|
04-22-2005, 03:32
Post: #7
|
|||
|
|||
|
80FC33 cruise control options
Mike, Thanks for the info. I'll give her a go. I'll let you know what
happens. Todd TUmbleston, 80FC33 Key Largo Mike Hohnstein <MHOHNSTEIN@...> wrote: The magnets are a hardware store item. 1/4" square by 1/8" thick will be fine. Mount 180 degrees apart in line with pick up coil. Attach to drive shaft with epoxy and secure with common wire tie. It's ok to use two wire ties if one long enough isn't available. The pick up coil should be 1/4" away from the shaft. If not enough signal is evident, place magnets 90 degrees apart on drive shaft. My Cruise King kit came with 4 magnets but I tried using the original two magnets and original pick up coil, works fine. A word of caution regarding the Cruise King, it requies a dedicated 20 amp circuit. Mike Hohnstein Germantown, WI ----- Original Message ----- From: Ernest Tumbleston To: WanderlodgeForum@yahoogroups.com Sent: Friday, April 22, 2005 7:58 AM Subject: Re: [WanderlodgeForum] Re: 80FC33 cruise control options Could your please provide me with the information on the number of magnets and how you attached them and where you got them from and where and when and what and ect..... Thanks.Todd Tumbleston, 80FC33, Key Largo FL crittenden_bliss --- In WanderlodgeForum@yahoogroups.com, "ernesttumbleston" I put new magnets on mine and it works just fine. Crit in Pigeon Forge, Tenn. '80FC33 > > Has anyone experimented with different options for the old vacuum type > cruise controls on the older birds? Mine is missing the drive shaft > magnets and I don't know if it works beyond that. I would like to > replace it and have been informed of one type. Any other replacements > out there worth investigation at a 'not to terrible' price? ALso if you > have an old vacuum system or the magnet pickups or info on them, please > let me know..... > > Thanks Todd Tumbleston 80FC33, Key Largo Fl --------------------------------- Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/WanderlodgeForum/ To unsubscribe from this group, send an email to: WanderlodgeForum-unsubscribe@yahoogroups.com Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com [Non-text portions of this message have been removed] ------------------------------------------------------------------------------ Yahoo! Groups Links a.. To visit your group on the web, go to: http://groups.yahoo.com/group/WanderlodgeForum/ b.. To unsubscribe from this group, send an email to: WanderlodgeForum-unsubscribe@yahoogroups.com c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. [Non-text portions of this message have been removed] --------------------------------- Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/WanderlodgeForum/ To unsubscribe from this group, send an email to: WanderlodgeForum-unsubscribe@yahoogroups.com Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com [Non-text portions of this message have been removed] |
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)