Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
83 bluebird owner here....ole Tom
12-21-2006, 18:37
Post: #11
83 bluebird owner here....ole Tom
Guys, I am no expert, but I watched the guys do it at the truck wash,
and they didn't use any sandpaper or any other "prep". My wheels
looked awful, bad cloudy. They applied some sort of slurry material
by hand, then buffed it off with a regular paint buffer. I was
floored at the results. Had tried to do it myself and didn't even
make a difference.

I am spoiled here in Memphis, we are the distribution capital of the
nation, the intersection of I-40 and I-55, so there are many truck-
related support places here. If there is not a good professional
truck wash near you, look for one on your next trip. My wheels went
from horrible to mirror shine in about 40 minutes for $32.

Scott


--- In WanderlodgeForum@yahoogroups.com, Curt Sprenger
wrote:
>
> All good information.
>
> FWIW...I use a 1' thick, 4" x 5" piece of packing foam (the gray
stuff,
> it's less expensive than anything else I've used). Load it somewhat
> sparingly with the cleaner/polishing compound and get started. The
Foam
> stays wet with the cleaning/polishing compound which speeds up the
> manual polishing process by 50%. A two compound process takes about
20 -
> 30 minutes per wheel.
>
> Curt Sprenger
> 1987 PT38 8V92 "MacAttack Racing"
> Anaheim Hills, Calif.
>
>
>
> Gregory OConnor wrote:
>
> >Gardner, Like John said use 1000 grit wetpaper hold a rag full of
> >water with little dish soap in it and keep the paper wet. the
water
> >keeps the sand paper clean. Some polishing compounds 'Shine and
> >protect' they leave a wax or coating behind that protects the
> >finished job. The wax should be removed prior to re polishing or
you
> >waste time and product cutting through the wax. I like to use
> >laundry soap first to remove the wax. Mothers balls work good but
I
> >dont like to use the mothers compounds because I think the wax
clogs
> >the cutting process.
> >GregoryO'Connor
> >94ptRomolandCa
> >
> >--- In WanderlodgeForum@yahoogroups.com, "John"
> >wrote:
> >
> >
> >>Gardner,
> >>
> >>When you started to polish your wheels did you start with 1000
grit
> >>sandpaper? Mine had not been cleaned or polished in four years,
> >>
> >>
> >that
> >
> >
> >>is the way that I started, you can see the initial results on my
> >>
> >>
> >web
> >
> >
> >>site at;
> >>
> >>http://www.pbase.com/iamflagman/image/34374170
> >>
> >>I now just use the Mothers Powerball system to maintain that
shine.
> >>
> >>http://www.mothers.com/products/productc..._prod.html
> >>
> >>
> >>"REMEMBER SEPTEMBER 11, 2001"
> >>John Finn
> >>'82 35FCRB
> >>BLUEBIRD WANDERLODGE
> >>TO VISIT THE "FINN'S INN EXPRESS" REMODELING ADVENTURE
> >>GO TO;
> >>http://www.pbase.com/image/24977457
> >>HOPKINS, SOUTH CAROLINA
> >>
> >>//////////////////////////////////////////////////
> >>
> >>--- In WanderlodgeForum@yahoogroups.com, "Gardner Yeaw"
> >>wrote:
> >>
> >>
> >>>Scott,
> >>> I wish I could find someone near New Jersey that would polish
> >>>wheels. I have worn out several buffer pads and they still look
> >>>pretty bad.
> >>>
> >>>Gardner
> >>>78FC33
> >>>
> >>>--- In WanderlodgeForum@yahoogroups.com, "Scott Forman"
> >>><sforman@> wrote:
> >>>
> >>>
> >>>>Alex,
> >>>>
> >>>>My FC wheels are like that, I had them professionally polished
> >>>>
> >>>>
> >at
> >
> >
> >>>a
> >>>
> >>>
> >>>>truck wash. You could shave in them. I think it was $8 per
> >>>>
> >>>>
> >>wheel.
> >>
> >>
> >>>>Scott Forman
> >>>>82 FC35RB
> >>>>Memphis
> >>>>
> >>>>--- In WanderlodgeForum@yahoogroups.com, Alex Smith
> >>>>
> >>>>
> >>
> >>
> >>
> >>>>wrote:
> >>>>
> >>>>
> >>>>>Tom, really a great looking Bird! I sure would be interested
> >>>>>
> >>>>>
> >in
> >
> >
> >>>>knowing how you got your alum. wheels so shinny, almost chrome
> >>>>looking?
> >>>>
> >>>>
> >>>>>Thanks!
> >>>>>Alex Smith
> >>>>>82FC35
> >>>>>Tallahassee, FL
> >>>>>
> >>>>>bluetomb95
> >>>>>
> >>>>>
> >>>>wrote: ---I have owned coach
> >>>>
> >>>>
> >>>going 7
> >>>
> >>>
> >>>>years been to 5 rallys in the valley
> >>>>
> >>>>
> >>>>> anyone is welcome to come look and drive. I love to show my
> >>>>>
> >>>>>
> >>>coach.
> >>>
> >>>
> >>>>> 83FC-35
> >>>>> 95PT-40
> >>>>> Ole Tom
> >>>>> Dorton Ky.
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>.
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>> __________________________________________________
> >>>>>Do You Yahoo!?
> >>>>>Tired of spam? Yahoo! Mail has the best spam protection
> >>>>>
> >>>>>
> >around
> >
> >
> >>>>>http://mail.yahoo.com
> >>>>>
> >>>>>[Non-text portions of this message have been removed]
> >>>>>
> >>>>>
> >>>>>
> >
> >
> >
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>
Quote this message in a reply
12-22-2006, 09:59
Post: #12
83 bluebird owner here....ole Tom
Tom,
As I have said in the past, I will plan to attend for sure, but I
will be going to Ireland the first week in June, I think. We are
taking the 'last' family vacation as my 3 kids are starting to leave
the nest.

Gardner
78FC33


--- In WanderlodgeForum@yahoogroups.com, "warbucks13477"
wrote:
>
> Was thinking of having a rally here in the Mohawk vally near
Utica,
> NY next spring or early summer with the intention of having a few
> instructional seminars and polishing the wheels could be one of
them.
> There are some tricks to doing it so you dont wear yourself out
> listening to a big polisher rev up for several hours.
>
> If there are enough people interested in coming (there are a few
that
> have already agreed) we can start making more concrete plans.
Another
> project might be reconfiguring the fresh water system so
antifreeze
> can be installed and then quickly removed when ever you want,
reading
> BB factory blue prints, tracing wires without diagrams. Lots of
> things for the kids and women to do here if this is to be a family
> affair. Standard bred race track, stock car track, casino,
brewery,
> silver ware factory, antique cars, revolutionary war history, Erie
> Canal etc. How many are interested?
>
> tom warner
> vernon center,ny
> 1985 PT 40
>
>
>
>
>
>
> --- In WanderlodgeForum@yahoogroups.com, "Gardner Yeaw"
> wrote:
> >
> > Scott,
> > I wish I could find someone near New Jersey that would polish
> > wheels. I have worn out several buffer pads and they still look
> > pretty bad.
> >
> > Gardner
> > 78FC33
> >
> > --- In WanderlodgeForum@yahoogroups.com, "Scott Forman"
> > <sforman@> wrote:
> > >
> > > Alex,
> > >
> > > My FC wheels are like that, I had them professionally polished
at
> > a
> > > truck wash. You could shave in them. I think it was $8 per
> wheel.
> > >
> > > Scott Forman
> > > 82 FC35RB
> > > Memphis
> > >
> > > --- In WanderlodgeForum@yahoogroups.com, Alex Smith
>
> > > wrote:
> > > >
> > > > Tom, really a great looking Bird! I sure would be interested
in
> > > knowing how you got your alum. wheels so shinny, almost chrome
> > > looking?
> > > > Thanks!
> > > > Alex Smith
> > > > 82FC35
> > > > Tallahassee, FL
> > > >
> > > > bluetomb95
> > > wrote: ---I have owned coach
> > going 7
> > > years been to 5 rallys in the valley
> > > > anyone is welcome to come look and drive. I love to show
my
> > coach.
> > > > 83FC-35
> > > > 95PT-40
> > > > Ole Tom
> > > > Dorton Ky.
> > > >
> > > >
> > > >
> > > >
> > > > .
> > > >
> > > >
> > > >
> > > >
> > > > __________________________________________________
> > > > Do You Yahoo!?
> > > > Tired of spam? Yahoo! Mail has the best spam protection
around
> > > > http://mail.yahoo.com
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > >
> >
>
Quote this message in a reply
12-22-2006, 11:33
Post: #13
83 bluebird owner here....ole Tom
John,
No, I did not use sandpaper. It seems that should be my next step.
I really need to take the wheels off to get around the lug area, but
that is another project I am not ready for.


Gardner
78FC33

--- In WanderlodgeForum@yahoogroups.com, "John"
wrote:
>
> Gardner,
>
> When you started to polish your wheels did you start with 1000
grit
> sandpaper? Mine had not been cleaned or polished in four years,
that
> is the way that I started, you can see the initial results on my
web
> site at;
>
> http://www.pbase.com/iamflagman/image/34374170
>
> I now just use the Mothers Powerball system to maintain that shine.
>
> http://www.mothers.com/products/productc..._prod.html
>
>
> "REMEMBER SEPTEMBER 11, 2001"
> John Finn
> '82 35FCRB
> BLUEBIRD WANDERLODGE
> TO VISIT THE "FINN'S INN EXPRESS" REMODELING ADVENTURE
> GO TO;
> http://www.pbase.com/image/24977457
> HOPKINS, SOUTH CAROLINA
>
> //////////////////////////////////////////////////
>
> --- In WanderlodgeForum@yahoogroups.com, "Gardner Yeaw"
> wrote:
> >
> > Scott,
> > I wish I could find someone near New Jersey that would polish
> > wheels. I have worn out several buffer pads and they still look
> > pretty bad.
> >
> > Gardner
> > 78FC33
> >
> > --- In WanderlodgeForum@yahoogroups.com, "Scott Forman"
> > <sforman@> wrote:
> > >
> > > Alex,
> > >
> > > My FC wheels are like that, I had them professionally polished
at
> > a
> > > truck wash. You could shave in them. I think it was $8 per
> wheel.
> > >
> > > Scott Forman
> > > 82 FC35RB
> > > Memphis
> > >
> > > --- In WanderlodgeForum@yahoogroups.com, Alex Smith
>
> > > wrote:
> > > >
> > > > Tom, really a great looking Bird! I sure would be interested
in
> > > knowing how you got your alum. wheels so shinny, almost chrome
> > > looking?
> > > > Thanks!
> > > > Alex Smith
> > > > 82FC35
> > > > Tallahassee, FL
> > > >
> > > > bluetomb95
> > > wrote: ---I have owned coach
> > going 7
> > > years been to 5 rallys in the valley
> > > > anyone is welcome to come look and drive. I love to show
my
> > coach.
> > > > 83FC-35
> > > > 95PT-40
> > > > Ole Tom
> > > > Dorton Ky.
> > > >
> > > >
> > > >
> > > >
> > > > .
> > > >
> > > >
> > > >
> > > >
> > > > __________________________________________________
> > > > Do You Yahoo!?
> > > > Tired of spam? Yahoo! Mail has the best spam protection
around
> > > > http://mail.yahoo.com
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > >
> >
>
Quote this message in a reply
12-23-2006, 13:19
Post: #14
83 bluebird owner here....ole Tom
Ow, ouch, everything hurts! I got out the wet sandpaper and worked
on the wheels, most of the day. I couldn't find 1000 so I settled
for 1500 grit. I guess I need to accept that each attempt is only
one step in a slow path to a briliant shine. I worked on three
wheels today, but only one really looks OK. Once I got sick of
sanding I tried a couple of polishing systems, but the reality is I
need to spend more time sanding.

I don't think the wheels have been shined for many years, if ever.
I have been tempted to go below 1000 in grit to get the pits out,
but that may be a bad decision. I guess lots of time and patience
is the only answer.

Gardner
78FC33 (not briliant, but better)

--- In WanderlodgeForum@yahoogroups.com, "Gardner Yeaw"
wrote:
>
> John,
> No, I did not use sandpaper. It seems that should be my next
step.
> I really need to take the wheels off to get around the lug area,
but
> that is another project I am not ready for.
>
>
> Gardner
> 78FC33
>
> --- In WanderlodgeForum@yahoogroups.com, "John"
> wrote:
> >
> > Gardner,
> >
> > When you started to polish your wheels did you start with 1000
> grit
> > sandpaper? Mine had not been cleaned or polished in four years,
> that
> > is the way that I started, you can see the initial results on my
> web
> > site at;
> >
> > http://www.pbase.com/iamflagman/image/34374170
> >
> > I now just use the Mothers Powerball system to maintain that
shine.
> >
> > http://www.mothers.com/products/productc..._prod.html
> >
> >
> > "REMEMBER SEPTEMBER 11, 2001"
> > John Finn
> > '82 35FCRB
> > BLUEBIRD WANDERLODGE
> > TO VISIT THE "FINN'S INN EXPRESS" REMODELING ADVENTURE
> > GO TO;
> > http://www.pbase.com/image/24977457
> > HOPKINS, SOUTH CAROLINA
> >
> > //////////////////////////////////////////////////
> >
> > --- In WanderlodgeForum@yahoogroups.com, "Gardner Yeaw"

> > wrote:
> > >
> > > Scott,
> > > I wish I could find someone near New Jersey that would
polish
> > > wheels. I have worn out several buffer pads and they still
look
> > > pretty bad.
> > >
> > > Gardner
> > > 78FC33
> > >
> > > --- In WanderlodgeForum@yahoogroups.com, "Scott Forman"
> > > <sforman@> wrote:
> > > >
> > > > Alex,
> > > >
> > > > My FC wheels are like that, I had them professionally
polished
> at
> > > a
> > > > truck wash. You could shave in them. I think it was $8 per
> > wheel.
> > > >
> > > > Scott Forman
> > > > 82 FC35RB
> > > > Memphis
> > > >
> > > > --- In WanderlodgeForum@yahoogroups.com, Alex Smith
> >
> > > > wrote:
> > > > >
> > > > > Tom, really a great looking Bird! I sure would be
interested
> in
> > > > knowing how you got your alum. wheels so shinny, almost
chrome
> > > > looking?
> > > > > Thanks!
> > > > > Alex Smith
> > > > > 82FC35
> > > > > Tallahassee, FL
> > > > >
> > > > > bluetomb95
> > > > wrote: ---I have owned
coach
> > > going 7
> > > > years been to 5 rallys in the valley
> > > > > anyone is welcome to come look and drive. I love to show
> my
> > > coach.
> > > > > 83FC-35
> > > > > 95PT-40
> > > > > Ole Tom
> > > > > Dorton Ky.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > .
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > __________________________________________________
> > > > > Do You Yahoo!?
> > > > > Tired of spam? Yahoo! Mail has the best spam protection
> around
> > > > > http://mail.yahoo.com
> > > > >
> > > > > [Non-text portions of this message have been removed]
> > > > >
> > > >
> > >
> >
>
Quote this message in a reply
12-23-2006, 13:57
Post: #15
83 bluebird owner here....ole Tom
Something to consider when you are doing your wheels is to keep your
paper lubricated. On aluminum if you dry sand it, it will never get the
shine you are looking for. There is a special polishing oil for this or
you can use something very thin. Try not to use something that will
evaporate.

I polish aluminum for molds so you know my reasons for results.

If you have access to MSC, this is a good source for sanding paper and
many other supplies for polishing. Depends on how bright you want them. As
a finishing touch when I am polishing the wheels is semi-chrome polish. It
will make a so-so wheel shine and it puts a protective coating on. Not the
same as wax, but it helps short term.

Chuck S
81fc35sb
Ormond Beach, FL

> Ow, ouch, everything hurts! I got out the wet sandpaper and worked
> on the wheels, most of the day. I couldn't find 1000 so I settled
> for 1500 grit. I guess I need to accept that each attempt is only
> one step in a slow path to a briliant shine. I worked on three
> wheels today, but only one really looks OK. Once I got sick of
> sanding I tried a couple of polishing systems, but the reality is I
> need to spend more time sanding.
>
> I don't think the wheels have been shined for many years, if ever.
> I have been tempted to go below 1000 in grit to get the pits out,
> but that may be a bad decision. I guess lots of time and patience
> is the only answer.
>
> Gardner
> 78FC33 (not briliant, but better)
>
> --- In WanderlodgeForum@yahoogroups.com, "Gardner Yeaw"
> wrote:
>>
>> John,
>> No, I did not use sandpaper. It seems that should be my next
> step.
>> I really need to take the wheels off to get around the lug area,
> but
>> that is another project I am not ready for.
>>
>>
>> Gardner
>> 78FC33
>>
>> --- In WanderlodgeForum@yahoogroups.com, "John"
>> wrote:
>> >
>> > Gardner,
>> >
>> > When you started to polish your wheels did you start with 1000
>> grit
>> > sandpaper? Mine had not been cleaned or polished in four years,
>> that
>> > is the way that I started, you can see the initial results on my
>> web
>> > site at;
>> >
>> > http://www.pbase.com/iamflagman/image/34374170
>> >
>> > I now just use the Mothers Powerball system to maintain that
> shine.
>> >
>> > http://www.mothers.com/products/productc..._prod.html
>> >
>> >
>> > "REMEMBER SEPTEMBER 11, 2001"
>> > John Finn
>> > '82 35FCRB
>> > BLUEBIRD WANDERLODGE
>> > TO VISIT THE "FINN'S INN EXPRESS" REMODELING ADVENTURE
>> > GO TO;
>> > http://www.pbase.com/image/24977457
>> > HOPKINS, SOUTH CAROLINA
>> >
>> > //////////////////////////////////////////////////
>> >
>> > --- In WanderlodgeForum@yahoogroups.com, "Gardner Yeaw"
>
>> > wrote:
>> > >
>> > > Scott,
>> > > I wish I could find someone near New Jersey that would
> polish
>> > > wheels. I have worn out several buffer pads and they still
> look
>> > > pretty bad.
>> > >
>> > > Gardner
>> > > 78FC33
>> > >
>> > > --- In WanderlodgeForum@yahoogroups.com, "Scott Forman"
>> > > <sforman@> wrote:
>> > > >
>> > > > Alex,
>> > > >
>> > > > My FC wheels are like that, I had them professionally
> polished
>> at
>> > > a
>> > > > truck wash. You could shave in them. I think it was $8 per
>> > wheel.
>> > > >
>> > > > Scott Forman
>> > > > 82 FC35RB
>> > > > Memphis
>> > > >
>> > > > --- In WanderlodgeForum@yahoogroups.com, Alex Smith
>> >
>> > > > wrote:
>> > > > >
>> > > > > Tom, really a great looking Bird! I sure would be
> interested
>> in
>> > > > knowing how you got your alum. wheels so shinny, almost
> chrome
>> > > > looking?
>> > > > > Thanks!
>> > > > > Alex Smith
>> > > > > 82FC35
>> > > > > Tallahassee, FL
>> > > > >
>> > > > > bluetomb95
>> > > > wrote: ---I have owned
> coach
>> > > going 7
>> > > > years been to 5 rallys in the valley
>> > > > > anyone is welcome to come look and drive. I love to show
>> my
>> > > coach.
>> > > > > 83FC-35
>> > > > > 95PT-40
>> > > > > Ole Tom
>> > > > > Dorton Ky.
>> > > > >
>> > > > >
>> > > > >
>> > > > >
>> > > > > .
>> > > > >
>> > > > >
>> > > > >
>> > > > >
>> > > > > __________________________________________________
>> > > > > Do You Yahoo!?
>> > > > > Tired of spam? Yahoo! Mail has the best spam protection
>> around
>> > > > > http://mail.yahoo.com
>> > > > >
>> > > > > [Non-text portions of this message have been removed]
>> > > > >
>> > > >
>> > >
>> >
>>
>
>
>
Quote this message in a reply
12-23-2006, 14:08
Post: #16
83 bluebird owner here....ole Tom
I went through this process couple years ago. The sequence was 320, 640,
1000, Tripoli buffing compound, Bluemagic polishing cream, and Busch's
aluminum wheel wax and sealant. Had the rears off all of one winter in the
garage and spent maybe 20 hours on each one (don't do winter sports). Used
air powered 2 and 3 inch orbital sander with the 320 and 640, manual on the
wet 1000 and beyond. The only short cut I know is to pay a pro.

dandarst86fc35rbhuntleyil.

>From: "Gardner Yeaw"
>Reply-To: WanderlodgeForum@yahoogroups.com
>To: WanderlodgeForum@yahoogroups.com
>Subject: [WanderlodgeForum] Re: 83 bluebird owner here....ole Tom
>Date: Sun, 24 Dec 2006 01:19:02 -0000
>
>Ow, ouch, everything hurts! I got out the wet sandpaper and worked
>on the wheels, most of the day. I couldn't find 1000 so I settled
>for 1500 grit. I guess I need to accept that each attempt is only
>one step in a slow path to a briliant shine. I worked on three
>wheels today, but only one really looks OK. Once I got sick of
>sanding I tried a couple of polishing systems, but the reality is I
>need to spend more time sanding.
>
> I don't think the wheels have been shined for many years, if ever.
>I have been tempted to go below 1000 in grit to get the pits out,
>but that may be a bad decision. I guess lots of time and patience
>is the only answer.
>
>Gardner
>78FC33 (not briliant, but better)
>
>--- In WanderlodgeForum@yahoogroups.com, "Gardner Yeaw"
>wrote:
> >
> > John,
> > No, I did not use sandpaper. It seems that should be my next
>step.
> > I really need to take the wheels off to get around the lug area,
>but
> > that is another project I am not ready for.
> >
> >
> > Gardner
> > 78FC33
> >
> > --- In WanderlodgeForum@yahoogroups.com, "John"
> > wrote:
> > >
> > > Gardner,
> > >
> > > When you started to polish your wheels did you start with 1000
> > grit
> > > sandpaper? Mine had not been cleaned or polished in four years,
> > that
> > > is the way that I started, you can see the initial results on my
> > web
> > > site at;
> > >
> > > http://www.pbase.com/iamflagman/image/34374170
> > >
> > > I now just use the Mothers Powerball system to maintain that
>shine.
> > >
> > > http://www.mothers.com/products/productc..._prod.html
> > >
> > >
> > > "REMEMBER SEPTEMBER 11, 2001"
> > > John Finn
> > > '82 35FCRB
> > > BLUEBIRD WANDERLODGE
> > > TO VISIT THE "FINN'S INN EXPRESS" REMODELING ADVENTURE
> > > GO TO;
> > > http://www.pbase.com/image/24977457
> > > HOPKINS, SOUTH CAROLINA
> > >
> > > //////////////////////////////////////////////////
> > >
> > > --- In WanderlodgeForum@yahoogroups.com, "Gardner Yeaw"
>
> > > wrote:
> > > >
> > > > Scott,
> > > > I wish I could find someone near New Jersey that would
>polish
> > > > wheels. I have worn out several buffer pads and they still
>look
> > > > pretty bad.
> > > >
> > > > Gardner
> > > > 78FC33
> > > >
> > > > --- In WanderlodgeForum@yahoogroups.com, "Scott Forman"
> > > > <sforman@> wrote:
> > > > >
> > > > > Alex,
> > > > >
> > > > > My FC wheels are like that, I had them professionally
>polished
> > at
> > > > a
> > > > > truck wash. You could shave in them. I think it was $8 per
> > > wheel.
> > > > >
> > > > > Scott Forman
> > > > > 82 FC35RB
> > > > > Memphis
> > > > >
> > > > > --- In WanderlodgeForum@yahoogroups.com, Alex Smith
> > >
> > > > > wrote:
> > > > > >
> > > > > > Tom, really a great looking Bird! I sure would be
>interested
> > in
> > > > > knowing how you got your alum. wheels so shinny, almost
>chrome
> > > > > looking?
> > > > > > Thanks!
> > > > > > Alex Smith
> > > > > > 82FC35
> > > > > > Tallahassee, FL
> > > > > >
> > > > > > bluetomb95
> > > > > wrote: ---I have owned
>coach
> > > > going 7
> > > > > years been to 5 rallys in the valley
> > > > > > anyone is welcome to come look and drive. I love to show
> > my
> > > > coach.
> > > > > > 83FC-35
> > > > > > 95PT-40
> > > > > > Ole Tom
> > > > > > Dorton Ky.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > .
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > __________________________________________________
> > > > > > Do You Yahoo!?
> > > > > > Tired of spam? Yahoo! Mail has the best spam protection
> > around
> > > > > > http://mail.yahoo.com
> > > > > >
> > > > > > [Non-text portions of this message have been removed]
> > > > > >
> > > > >
> > > >
> > >
> >
>
>

_________________________________________________________________
Get FREE Web site and company branded e-mail from Microsoft Office Live
http://clk.atdmt.com/MRT/go/mcrssaub0050...direct/01/
Quote this message in a reply
12-23-2006, 14:14
Post: #17
83 bluebird owner here....ole Tom
Dan,
Thanks, you really made my day.
Gardner
78FC33

--- In WanderlodgeForum@yahoogroups.com, "Dan Darst"
wrote:
>
> I went through this process couple years ago. The sequence was
320, 640,
> 1000, Tripoli buffing compound, Bluemagic polishing cream, and
Busch's
> aluminum wheel wax and sealant. Had the rears off all of one
winter in the
> garage and spent maybe 20 hours on each one (don't do winter
sports). Used
> air powered 2 and 3 inch orbital sander with the 320 and 640,
manual on the
> wet 1000 and beyond. The only short cut I know is to pay a pro.
>
> dandarst86fc35rbhuntleyil.
>
> >From: "Gardner Yeaw"
> >Reply-To: WanderlodgeForum@yahoogroups.com
> >To: WanderlodgeForum@yahoogroups.com
> >Subject: [WanderlodgeForum] Re: 83 bluebird owner here....ole Tom
> >Date: Sun, 24 Dec 2006 01:19:02 -0000
> >
> >Ow, ouch, everything hurts! I got out the wet sandpaper and worked
> >on the wheels, most of the day. I couldn't find 1000 so I settled
> >for 1500 grit. I guess I need to accept that each attempt is only
> >one step in a slow path to a briliant shine. I worked on three
> >wheels today, but only one really looks OK. Once I got sick of
> >sanding I tried a couple of polishing systems, but the reality is
I
> >need to spend more time sanding.
> >
> > I don't think the wheels have been shined for many years, if
ever.
> >I have been tempted to go below 1000 in grit to get the pits out,
> >but that may be a bad decision. I guess lots of time and patience
> >is the only answer.
> >
> >Gardner
> >78FC33 (not briliant, but better)
> >
> >--- In WanderlodgeForum@yahoogroups.com, "Gardner Yeaw"
> >wrote:
> > >
> > > John,
> > > No, I did not use sandpaper. It seems that should be my next
> >step.
> > > I really need to take the wheels off to get around the lug
area,
> >but
> > > that is another project I am not ready for.
> > >
> > >
> > > Gardner
> > > 78FC33
> > >
> > > --- In WanderlodgeForum@yahoogroups.com, "John"
> > > wrote:
> > > >
> > > > Gardner,
> > > >
> > > > When you started to polish your wheels did you start with
1000
> > > grit
> > > > sandpaper? Mine had not been cleaned or polished in four
years,
> > > that
> > > > is the way that I started, you can see the initial results
on my
> > > web
> > > > site at;
> > > >
> > > > http://www.pbase.com/iamflagman/image/34374170
> > > >
> > > > I now just use the Mothers Powerball system to maintain that
> >shine.
> > > >
> > > >
http://www.mothers.com/products/productc..._prod.html
> > > >
> > > >
> > > > "REMEMBER SEPTEMBER 11, 2001"
> > > > John Finn
> > > > '82 35FCRB
> > > > BLUEBIRD WANDERLODGE
> > > > TO VISIT THE "FINN'S INN EXPRESS" REMODELING ADVENTURE
> > > > GO TO;
> > > > http://www.pbase.com/image/24977457
> > > > HOPKINS, SOUTH CAROLINA
> > > >
> > > > //////////////////////////////////////////////////
> > > >
> > > > --- In WanderlodgeForum@yahoogroups.com, "Gardner Yeaw"
> >
> > > > wrote:
> > > > >
> > > > > Scott,
> > > > > I wish I could find someone near New Jersey that would
> >polish
> > > > > wheels. I have worn out several buffer pads and they still
> >look
> > > > > pretty bad.
> > > > >
> > > > > Gardner
> > > > > 78FC33
> > > > >
> > > > > --- In WanderlodgeForum@yahoogroups.com, "Scott Forman"
> > > > > <sforman@> wrote:
> > > > > >
> > > > > > Alex,
> > > > > >
> > > > > > My FC wheels are like that, I had them professionally
> >polished
> > > at
> > > > > a
> > > > > > truck wash. You could shave in them. I think it was $8
per
> > > > wheel.
> > > > > >
> > > > > > Scott Forman
> > > > > > 82 FC35RB
> > > > > > Memphis
> > > > > >
> > > > > > --- In WanderlodgeForum@yahoogroups.com, Alex Smith
> > > >
> > > > > > wrote:
> > > > > > >
> > > > > > > Tom, really a great looking Bird! I sure would be
> >interested
> > > in
> > > > > > knowing how you got your alum. wheels so shinny, almost
> >chrome
> > > > > > looking?
> > > > > > > Thanks!
> > > > > > > Alex Smith
> > > > > > > 82FC35
> > > > > > > Tallahassee, FL
> > > > > > >
> > > > > > > bluetomb95
> > > > > > wrote: ---I have owned
> >coach
> > > > > going 7
> > > > > > years been to 5 rallys in the valley
> > > > > > > anyone is welcome to come look and drive. I love to
show
> > > my
> > > > > coach.
> > > > > > > 83FC-35
> > > > > > > 95PT-40
> > > > > > > Ole Tom
> > > > > > > Dorton Ky.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > .
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > __________________________________________________
> > > > > > > Do You Yahoo!?
> > > > > > > Tired of spam? Yahoo! Mail has the best spam
protection
> > > around
> > > > > > > http://mail.yahoo.com
> > > > > > >
> > > > > > > [Non-text portions of this message have been removed]
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> >
>
> _________________________________________________________________
> Get FREE Web site and company branded e-mail from Microsoft Office
Live
> http://clk.atdmt.com/MRT/go/mcrssaub0050...direct/01/
>
Quote this message in a reply
12-23-2006, 14:18
Post: #18
83 bluebird owner here....ole Tom
Chuck,
I am not dry sanding, I use water with a bit of dish detergent. I
keep everything wet and the paper seems clean. It is just a lot of
work.
Gardner
78FC33

bg stays wet
--- In WanderlodgeForum@yahoogroups.com, cfsomers@... wrote:
>
> Something to consider when you are doing your wheels is to keep
your
> paper lubricated. On aluminum if you dry sand it, it will never
get the
> shine you are looking for. There is a special polishing oil for
this or
> you can use something very thin. Try not to use something that will
> evaporate.
>
> I polish aluminum for molds so you know my reasons for results.
>
> If you have access to MSC, this is a good source for sanding paper
and
> many other supplies for polishing. Depends on how bright you want
them. As
> a finishing touch when I am polishing the wheels is semi-chrome
polish. It
> will make a so-so wheel shine and it puts a protective coating on.
Not the
> same as wax, but it helps short term.
>
> Chuck S
> 81fc35sb
> Ormond Beach, FL
>
> > Ow, ouch, everything hurts! I got out the wet sandpaper and
worked
> > on the wheels, most of the day. I couldn't find 1000 so I settled
> > for 1500 grit. I guess I need to accept that each attempt is only
> > one step in a slow path to a briliant shine. I worked on three
> > wheels today, but only one really looks OK. Once I got sick of
> > sanding I tried a couple of polishing systems, but the reality
is I
> > need to spend more time sanding.
> >
> > I don't think the wheels have been shined for many years, if
ever.
> > I have been tempted to go below 1000 in grit to get the pits out,
> > but that may be a bad decision. I guess lots of time and
patience
> > is the only answer.
> >
> > Gardner
> > 78FC33 (not briliant, but better)
> >
> > --- In WanderlodgeForum@yahoogroups.com, "Gardner Yeaw"
> > wrote:
> >>
> >> John,
> >> No, I did not use sandpaper. It seems that should be my next
> > step.
> >> I really need to take the wheels off to get around the lug area,
> > but
> >> that is another project I am not ready for.
> >>
> >>
> >> Gardner
> >> 78FC33
> >>
> >> --- In WanderlodgeForum@yahoogroups.com, "John"
> >> wrote:
> >> >
> >> > Gardner,
> >> >
> >> > When you started to polish your wheels did you start with 1000
> >> grit
> >> > sandpaper? Mine had not been cleaned or polished in four
years,
> >> that
> >> > is the way that I started, you can see the initial results on
my
> >> web
> >> > site at;
> >> >
> >> > http://www.pbase.com/iamflagman/image/34374170
> >> >
> >> > I now just use the Mothers Powerball system to maintain that
> > shine.
> >> >
> >> > http://www.mothers.com/products/productc..._prod.html
> >> >
> >> >
> >> > "REMEMBER SEPTEMBER 11, 2001"
> >> > John Finn
> >> > '82 35FCRB
> >> > BLUEBIRD WANDERLODGE
> >> > TO VISIT THE "FINN'S INN EXPRESS" REMODELING ADVENTURE
> >> > GO TO;
> >> > http://www.pbase.com/image/24977457
> >> > HOPKINS, SOUTH CAROLINA
> >> >
> >> > //////////////////////////////////////////////////
> >> >
> >> > --- In WanderlodgeForum@yahoogroups.com, "Gardner Yeaw"
> >
> >> > wrote:
> >> > >
> >> > > Scott,
> >> > > I wish I could find someone near New Jersey that would
> > polish
> >> > > wheels. I have worn out several buffer pads and they still
> > look
> >> > > pretty bad.
> >> > >
> >> > > Gardner
> >> > > 78FC33
> >> > >
> >> > > --- In WanderlodgeForum@yahoogroups.com, "Scott Forman"
> >> > > <sforman@> wrote:
> >> > > >
> >> > > > Alex,
> >> > > >
> >> > > > My FC wheels are like that, I had them professionally
> > polished
> >> at
> >> > > a
> >> > > > truck wash. You could shave in them. I think it was $8
per
> >> > wheel.
> >> > > >
> >> > > > Scott Forman
> >> > > > 82 FC35RB
> >> > > > Memphis
> >> > > >
> >> > > > --- In WanderlodgeForum@yahoogroups.com, Alex Smith
> >> >
> >> > > > wrote:
> >> > > > >
> >> > > > > Tom, really a great looking Bird! I sure would be
> > interested
> >> in
> >> > > > knowing how you got your alum. wheels so shinny, almost
> > chrome
> >> > > > looking?
> >> > > > > Thanks!
> >> > > > > Alex Smith
> >> > > > > 82FC35
> >> > > > > Tallahassee, FL
> >> > > > >
> >> > > > > bluetomb95
> >> > > > wrote: ---I have owned
> > coach
> >> > > going 7
> >> > > > years been to 5 rallys in the valley
> >> > > > > anyone is welcome to come look and drive. I love to
show
> >> my
> >> > > coach.
> >> > > > > 83FC-35
> >> > > > > 95PT-40
> >> > > > > Ole Tom
> >> > > > > Dorton Ky.
> >> > > > >
> >> > > > >
> >> > > > >
> >> > > > >
> >> > > > > .
> >> > > > >
> >> > > > >
> >> > > > >
> >> > > > >
> >> > > > > __________________________________________________
> >> > > > > Do You Yahoo!?
> >> > > > > Tired of spam? Yahoo! Mail has the best spam protection
> >> around
> >> > > > > http://mail.yahoo.com
> >> > > > >
> >> > > > > [Non-text portions of this message have been removed]
> >> > > > >
> >> > > >
> >> > >
> >> >
> >>
> >
> >
> >
>
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)