Dual Tire Valves

[Howard O. Truitt]

Hi All,
Does anyone have good supplier on heavy duty brass or chrome inside
dual tire valves of different lengths. Also a heavy duty chrome
straight and C curved valve for outer dual and other tires.
Howard Truitt
Camilla, Ga.
86 PT40

[Tom Warner]

Howard I have found a source for really nice valve stems and ordered
enough to replace all of mine. I chose them because of the type of
seal which does not deteriorate due to UV. Remember you need the
valve stems for aluminum wheels. http://tinyurl.com/2hblmj


Tom Warner
Vernon Center,NY
1984 PT 40




thAt 11:22 AM 5/10/2007, you wrote:
>Hi All,
>Does anyone have good supplier on heavy duty brass or chrome inside
>dual tire valves of different lengths. Also a heavy duty chrome
>straight and C curved valve for outer dual and other tires.
>Howard Truitt
>Camilla, Ga.
>86 PT40
>
>
>
>
>
>Yahoo! Groups Links
>
>
>

[truitt44@...>]

Tom,
As usual "Your the Man".
Thanks,
Howard Truitt
Camilla, Ga.
86 PT40


>
> From: Tom Warner
> Date: 2007/05/12 Sat PM 07:45:56 EDT
> To: WanderlodgeForum@yahoogroups.com
> Subject: Re: [WanderlodgeForum] Dual Tire Valves
>
> Howard I have found a source for really nice valve stems and ordered
> enough to replace all of mine. I chose them because of the type of
> seal which does not deteriorate due to UV. Remember you need the
> valve stems for aluminum wheels. http://tinyurl.com/2hblmj
>
>
> Tom Warner
> Vernon Center,NY
> 1984 PT 40
>
>
>
>
> thAt 11:22 AM 5/10/2007, you wrote:
> >Hi All,
> >Does anyone have good supplier on heavy duty brass or chrome inside
> >dual tire valves of different lengths. Also a heavy duty chrome
> >straight and C curved valve for outer dual and other tires.
> >Howard Truitt
> >Camilla, Ga.
> >86 PT40
> >
> >
> >
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
>
>
>
>

[Tom Warner]

Howard will call you in just a minute. Here is the picture of the
charger ckt for the generator. Will describe it to you using schematic

tom