Rear view camera

[Scott Forman]

My rear camera didn't work when I bought my coach, but last week I was
able to get it working just by cleaning some connectors and tightening
some wired. Worked great, or at least as great as these original units
work.

I took a trip yesterday, though, and discovered that turning on the
generator causes the screen to go to static. Anyone know a solution
for this? Perhaps a ground or something?

Thanks
Scott Forman
86 PT38

[truitt44@...>]

Scott,
My monitor would flicker real bad so I took the monitor out removed the boards
and with a magnifying glass checked the solder joints. I had several cracked
solder joints resoldered reinstalled and it works fine now. The plexiglass
covering the rear camera had crazing all through it replaced the plexiglass and
now have a sharp picture. Good luck.
Howard Truitt
Camilla, Ga.
86 PT40

>
> From: "Scott Forman" <sforman@...>
> Date: 2007/06/03 Sun AM 10:56:39 EDT
> To: WanderlodgeForum@yahoogroups.com
> Subject: [WanderlodgeForum] Rear view camera
>
> My rear camera didn't work when I bought my coach, but last week I was
> able to get it working just by cleaning some connectors and tightening
> some wired. Worked great, or at least as great as these original units
> work.
>
> I took a trip yesterday, though, and discovered that turning on the
> generator causes the screen to go to static. Anyone know a solution
> for this? Perhaps a ground or something?
>
> Thanks
> Scott Forman
> 86 PT38
>
>
>

[Ralph L. Fullenwider]

Hi Scott:

Might want to take a look at the connections on the electronic filter unit
under the drivers side sofa. Just a thought.

Safe travels,

Ralph and Charolette Fullenwider
84FC35
Duncan, Oklahoma

At 02:56 PM 6/3/2007 +0000, you wrote:
>My rear camera didn't work when I bought my coach, but last week I was
>able to get it working just by cleaning some connectors and tightening
>some wired. Worked great, or at least as great as these original units
>work.
>
>I took a trip yesterday, though, and discovered that turning on the
>generator causes the screen to go to static. Anyone know a solution
>for this? Perhaps a ground or something?
>
>Thanks
>Scott Forman
>86 PT38
>
>