Gen has stop making electricity

[erniecarpet@...]

Scott, do you have the manual or automatic change over switch?

Ernie Ekberg
83PT40
Weatherford, Tx




************************************** See what's new at http://www.aol.com


[Non-text portions of this message have been removed]

[Scott Forman]

My Kohler generator has stopped making juice. Engine part is fine.
Ideas to troubleshoot?

Scott Forman
86 PT38
Memphis

[Al]

Scott,
You made sure that the breakers on the generator are not tripped?

Al Johnson
'96 BMC B75 ==> B100
Mandeville, Louisiana

--- In WanderlodgeForum@yahoogroups.com, "Scott Forman" <sforman@...>
wrote:
>
> My Kohler generator has stopped making juice. Engine part is fine.
> Ideas to troubleshoot?
>
> Scott Forman
> 86 PT38
> Memphis
>

[Scott Forman]

Yes

--- In WanderlodgeForum@yahoogroups.com, "Al" wrote:
>
> Scott,
> You made sure that the breakers on the generator are not
tripped?
>
> Al Johnson
> '96 BMC B75 ==> B100
> Mandeville, Louisiana
>
> --- In WanderlodgeForum@yahoogroups.com, "Scott Forman" <sforman@>
> wrote:
> >
> > My Kohler generator has stopped making juice. Engine part is
fine.
> > Ideas to troubleshoot?
> >
> > Scott Forman
> > 86 PT38
> > Memphis
> >
>

[Scott Forman]

Manual

--- In WanderlodgeForum@yahoogroups.com, erniecarpet@... wrote:
>
> Scott, do you have the manual or automatic change over switch?
>
> Ernie Ekberg
> 83PT40
> Weatherford, Tx
>
>
>
>
> ************************************** See what's new at
http://www.aol.com
>
>
> [Non-text portions of this message have been removed]
>

[Dan Williams]

Scott, it is fairly easy to inspect the brushes and leads so have you
checked them to see if they are good?

Dan

88pt38

Jackson, MS



_____

From: WanderlodgeForum@yahoogroups.com
[mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of Scott Forman
Sent: Monday, November 12, 2007 9:32 PM
To: WanderlodgeForum@yahoogroups.com
Subject: [WanderlodgeForum] Re: Gen has stop making electricity



Manual

--- In WanderlodgeForum@
yahoogroups.com, erniecarpet@... wrote:
>
> Scott, do you have the manual or automatic change over switch?
>
> Ernie Ekberg
> 83PT40
> Weatherford, Tx
>
>
>
>
> ************************************** See what's new at
http://www.aol. <http://www.aol.com> com
>
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]

[Ryan Wright]

Yup. Check those brushes. If they're good, check the voltage regulator next.

-Ryan
'86 PT-40 8V92

On 11/12/07, Dan Williams wrote:
>
> Scott, it is fairly easy to inspect the brushes and leads so have you
> checked them to see if they are good?
>
> Dan
> 88pt38
> Jackson, MS

[crissrace]

--- In WanderlodgeForum@yahoogroups.com, "Ryan Wright"
wrote:
>
> Yup. Check those brushes. If they're good, check the voltage
regulator next.
>
> -Ryan
> '86 PT-40 8V92
>
> On 11/12/07, Dan Williams wrote:
> >
> > Scott, it is fairly easy to inspect the brushes and leads so have
you
> > checked them to see if they are good?
> >
> > Dan
> > 88pt38
> > Jackson, MS
>
If it is a transformer regulated generator then check the taps on the
transformer. Mine started making 80 volts instead of 120. After
much searching i grabbed the wires and shook one loose from the sapde
connector. Fixed that and was back in business at 120 volts.
Bob Criss
90SP36
Bethel Park, PA

[Scott Forman]

It's down at the shop now, same guys who rebuilt the Kohler in my 82
FC (I knew it was bad when I bought the coach). I am sure they will
find it, I just hope it isn't the same problem that killed the other
one.

Scott

--- In WanderlodgeForum@yahoogroups.com, "Ryan Wright"
wrote:
>
> Yup. Check those brushes. If they're good, check the voltage
regulator next.
>
> -Ryan
> '86 PT-40 8V92
>
> On 11/12/07, Dan Williams wrote:
> >
> > Scott, it is fairly easy to inspect the brushes and leads so have
you
> > checked them to see if they are good?
> >
> > Dan
> > 88pt38
> > Jackson, MS
>