Wanderlodge Gurus - The Member Funded Wanderlodge Forum / Yahoo Groups Archive / WanderlodgeForum v / Heater part

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Heater part
12-09-2009, 05:04
Post: #1
ronmarabito2002
Unregistered
 		 
Heater part
Hi all: Does anyone have a source for the round disc resistor or capacitor
that mounts in the top of the Bathroom Electric Heater for a 92WB40. Mine has
disintegrated and can't get heat.

It has TOD 1-B1-B stamped on it.

R.E. (Ron) Marabito, Dallas, TX 92WB40
Quote this message in a reply
12-09-2009, 05:07
Post: #2
ronmarabito2002
Unregistered
 		 
Heater part
Studying this closer, it is probably a heat sensor or thermocouple.

R.E. (Ron) Marabito, Dallas, TX 92WB40

--- In WanderlodgeForum@yahoogroups.com, "ronmarabito2002"
wrote:
>
> Hi all: Does anyone have a source for the round disc resistor or capacitor
that mounts in the top of the Bathroom Electric Heater for a 92WB40. Mine has
disintegrated and can't get heat.
>
> It has TOD 1-B1-B stamped on it.
>
> R.E. (Ron) Marabito, Dallas, TX 92WB40
>
Quote this message in a reply
12-09-2009, 05:15
Post: #3
Curt Sprenger
Unregistered
 		 
Heater part
Ron,

Look like this?

 http://www.thermodisc.com/productdetail.asp?ProductID=1

the site has lots of them.

Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA




On Wed, Dec 9, 2009 at 9:07 AM, ronmarabito2002 <"remarabito@att.net"> wrote:
 


Studying this closer, it is probably a heat sensor or thermocouple.



R.E. (Ron) Marabito, Dallas, TX 92WB40



--- In "WanderlodgeForum%40yahoogroups.com", "ronmarabito2002" wrote:

>

> Hi all: Does anyone have a source for the round disc resistor or capacitor that mounts in the top of the Bathroom Electric Heater for a 92WB40. Mine has disintegrated and can't get heat.

>

> It has TOD 1-B1-B stamped on it.

>

> R.E. (Ron) Marabito, Dallas, TX 92WB40

>
Quote this message in a reply
12-09-2009, 05:21
Post: #4
ronmarabito2002
Unregistered
 		 
Heater part
Yes Curt. How do we determine the correct size?

R.E. (Ron) Marabito, Dallas, TX 92WB40

--- In WanderlodgeForum@yahoogroups.com, Curt Sprenger wrote:
>
> Ron,
>
> Look like this?
>
> http://www.thermodisc.com/productdetail.asp?ProductID=1
>
> the site has lots of them.
>
>
> Curt Sprenger
> 1987 PT38 8V92 "MacAttack Racing"
> Anaheim Hills, CA
>
>
>
> On Wed, Dec 9, 2009 at 9:07 AM, ronmarabito2002 wrote:
>
> >
> >
> > Studying this closer, it is probably a heat sensor or thermocouple.
> >
> > R.E. (Ron) Marabito, Dallas, TX 92WB40
> >
> > --- In WanderlodgeForum@yahoogroups.com,
> > "ronmarabito2002" wrote:
> > >
> > > Hi all: Does anyone have a source for the round disc resistor or
> > capacitor that mounts in the top of the Bathroom Electric Heater for a
> > 92WB40. Mine has disintegrated and can't get heat.
> > >
> > > It has TOD 1-B1-B stamped on it.
> > >
> > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> > >
> >
> >
> >
>
Quote this message in a reply
12-09-2009, 05:28
Post: #5
Curt Sprenger
Unregistered
 		 
Heater part
Correct size? Do you have the heater manual? It might have that information., or direct you to a source to get the information. 

Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"

Anaheim Hills, CA




On Wed, Dec 9, 2009 at 9:21 AM, ronmarabito2002 <"remarabito@att.net"> wrote:
 


Yes Curt. How do we determine the correct size?




R.E. (Ron) Marabito, Dallas, TX 92WB40


--- In "WanderlodgeForum%40yahoogroups.com", Curt Sprenger wrote:

>

> Ron,

>

> Look like this?

>

> http://www.thermodisc.com/productdetail.asp?ProductID=1

>

> the site has lots of them.

>

>

> Curt Sprenger

> 1987 PT38 8V92 "MacAttack Racing"

> Anaheim Hills, CA

>

>

>
> On Wed, Dec 9, 2009 at 9:07 AM, ronmarabito2002 wrote:

>

> >

> >

> > Studying this closer, it is probably a heat sensor or thermocouple.

> >

> > R.E. (Ron) Marabito, Dallas, TX 92WB40

> >
> > --- In "WanderlodgeForum%40yahoogroups.com"40yahoogroups.com>,


> > "ronmarabito2002" wrote:

> > >

> > > Hi all: Does anyone have a source for the round disc resistor or

> > capacitor that mounts in the top of the Bathroom Electric Heater for a

> > 92WB40. Mine has disintegrated and can't get heat.

> > >

> > > It has TOD 1-B1-B stamped on it.

> > >

> > > R.E. (Ron) Marabito, Dallas, TX 92WB40

> > >

> >

> >

> >

>
Quote this message in a reply
12-09-2009, 05:40
Post: #6
Curt Sprenger
Unregistered
 		 
Heater part
Ron,
Another source...Fenwal

http://www.fenwalcontrols.com/utcfs/Temp...75,00.html


Give them a call. Inform them what you have. My guess is they will know what you need.

Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA




On Wed, Dec 9, 2009 at 9:28 AM, Curt Sprenger <"curtsprenger@gmail.com"> wrote:
Correct size? Do you have the heater manual? It might have that information., or direct you to a source to get the information. 

Curt Sprenger

1987 PT38 8V92 "MacAttack Racing"

Anaheim Hills, CA




On Wed, Dec 9, 2009 at 9:21 AM, ronmarabito2002 <"remarabito@att.net"> wrote:

 


Yes Curt. How do we determine the correct size?




R.E. (Ron) Marabito, Dallas, TX 92WB40


--- In "WanderlodgeForum%40yahoogroups.com", Curt Sprenger wrote:

>

> Ron,

>

> Look like this?

>

> http://www.thermodisc.com/productdetail.asp?ProductID=1

>

> the site has lots of them.

>

>

> Curt Sprenger

> 1987 PT38 8V92 "MacAttack Racing"

> Anaheim Hills, CA

>

>

>
> On Wed, Dec 9, 2009 at 9:07 AM, ronmarabito2002 wrote:

>

> >

> >

> > Studying this closer, it is probably a heat sensor or thermocouple.

> >

> > R.E. (Ron) Marabito, Dallas, TX 92WB40

> >
> > --- In "WanderlodgeForum%40yahoogroups.com"40yahoogroups.com>,


> > "ronmarabito2002" wrote:

> > >

> > > Hi all: Does anyone have a source for the round disc resistor or

> > capacitor that mounts in the top of the Bathroom Electric Heater for a

> > 92WB40. Mine has disintegrated and can't get heat.

> > >

> > > It has TOD 1-B1-B stamped on it.

> > >

> > > R.E. (Ron) Marabito, Dallas, TX 92WB40

> > >

> >

> >

> >

>
Quote this message in a reply
12-09-2009, 05:52
Post: #7
SteveQ
Unregistered
 		 
Heater part
Ron

They should be White Rodgers parts, look here at the snap disc fan controls.
http://www.whiterodgers.com/wrdhom/commo...ace_12.htm

I think the one that I used was cut in at 110 and cut out at 90.

Steve Quandt
1993 PT-40
Iron Mountain, Mi



--- In WanderlodgeForum@yahoogroups.com, Curt Sprenger wrote:
>
> Ron,
> Another source...Fenwal
>
>
http://www.fenwalcontrols.com/utcfs/Temp...Id%3D\
1023%26siteId%3D375,00.html
>
> Give them a call. Inform them what you have. My guess is they will know what
> you need.
>
> Curt Sprenger
> 1987 PT38 8V92 "MacAttack Racing"
> Anaheim Hills, CA
>
>
>
> On Wed, Dec 9, 2009 at 9:28 AM, Curt Sprenger wrote:
>
> > Correct size? Do you have the heater manual? It might have that
> > information., or direct you to a source to get the information.
> >
> >
> > Curt Sprenger
> > 1987 PT38 8V92 "MacAttack Racing"
> > Anaheim Hills, CA
> >
> >
> >
> > On Wed, Dec 9, 2009 at 9:21 AM, ronmarabito2002 wrote:
> >
> >>
> >>
> >> Yes Curt. How do we determine the correct size?
> >>
> >>
> >> R.E. (Ron) Marabito, Dallas, TX 92WB40
> >>
> >> --- In
WanderlodgeForum@yahoogroups.com,
> >> Curt Sprenger wrote:
> >> >
> >> > Ron,
> >> >
> >> > Look like this?
> >> >
> >> > http://www.thermodisc.com/productdetail.asp?ProductID=1
> >> >
> >> > the site has lots of them.
> >> >
> >> >
> >> > Curt Sprenger
> >> > 1987 PT38 8V92 "MacAttack Racing"
> >> > Anaheim Hills, CA
> >> >
> >> >
> >> >
> >> > On Wed, Dec 9, 2009 at 9:07 AM, ronmarabito2002 wrote:
> >> >
> >> > >
> >> > >
> >> > > Studying this closer, it is probably a heat sensor or thermocouple.
> >> > >
> >> > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> >> > >
> >> > > --- In
WanderlodgeForum@yahoogroups.com
> >> ,
> >>
> >> > > "ronmarabito2002" wrote:
> >> > > >
> >> > > > Hi all: Does anyone have a source for the round disc resistor or
> >> > > capacitor that mounts in the top of the Bathroom Electric Heater for a
> >> > > 92WB40. Mine has disintegrated and can't get heat.
> >> > > >
> >> > > > It has TOD 1-B1-B stamped on it.
> >> > > >
> >> > > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> >> > > >
> >> > >
> >> > >
> >> > >
> >> >
> >>
> >>
> >>
> >
> >
>
Quote this message in a reply
12-09-2009, 06:06
Post: #8
ronmarabito2002
Unregistered
 		 
Heater part
Is this switch controlling the fan or the heat strip? I am not getting heat.
The fan runs all the time. Your source shows 3 different types of controls,
which is the correct type unit?

R.E. (Ron) Marabito, Dallas, TX 92WB40

--- In WanderlodgeForum@yahoogroups.com, "SteveQ" wrote:
>
> Ron
>
> They should be White Rodgers parts, look here at the snap disc fan controls.
> http://www.whiterodgers.com/wrdhom/commo...ace_12.htm
>
> I think the one that I used was cut in at 110 and cut out at 90.
>
> Steve Quandt
> 1993 PT-40
> Iron Mountain, Mi
>
>
>
> --- In WanderlodgeForum@yahoogroups.com, Curt Sprenger wrote:
> >
> > Ron,
> > Another source...Fenwal
> >
> >
http://www.fenwalcontrols.com/utcfs/Temp...Id%3D\
1023%26siteId%3D375,00.html
> >
> > Give them a call. Inform them what you have. My guess is they will know what
> > you need.
> >
> > Curt Sprenger
> > 1987 PT38 8V92 "MacAttack Racing"
> > Anaheim Hills, CA
> >
> >
> >
> > On Wed, Dec 9, 2009 at 9:28 AM, Curt Sprenger wrote:
> >
> > > Correct size? Do you have the heater manual? It might have that
> > > information., or direct you to a source to get the information.
> > >
> > >
> > > Curt Sprenger
> > > 1987 PT38 8V92 "MacAttack Racing"
> > > Anaheim Hills, CA
> > >
> > >
> > >
> > > On Wed, Dec 9, 2009 at 9:21 AM, ronmarabito2002 wrote:
> > >
> > >>
> > >>
> > >> Yes Curt. How do we determine the correct size?
> > >>
> > >>
> > >> R.E. (Ron) Marabito, Dallas, TX 92WB40
> > >>
> > >> --- In
WanderlodgeForum@yahoogroups.com,
> > >> Curt Sprenger wrote:
> > >> >
> > >> > Ron,
> > >> >
> > >> > Look like this?
> > >> >
> > >> > http://www.thermodisc.com/productdetail.asp?ProductID=1
> > >> >
> > >> > the site has lots of them.
> > >> >
> > >> >
> > >> > Curt Sprenger
> > >> > 1987 PT38 8V92 "MacAttack Racing"
> > >> > Anaheim Hills, CA
> > >> >
> > >> >
> > >> >
> > >> > On Wed, Dec 9, 2009 at 9:07 AM, ronmarabito2002 wrote:
> > >> >
> > >> > >
> > >> > >
> > >> > > Studying this closer, it is probably a heat sensor or thermocouple.
> > >> > >
> > >> > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> > >> > >
> > >> > > --- In
WanderlodgeForum@yahoogroups.com
> > >> ,
> > >>
> > >> > > "ronmarabito2002" wrote:
> > >> > > >
> > >> > > > Hi all: Does anyone have a source for the round disc resistor or
> > >> > > capacitor that mounts in the top of the Bathroom Electric Heater for
a
> > >> > > 92WB40. Mine has disintegrated and can't get heat.
> > >> > > >
> > >> > > > It has TOD 1-B1-B stamped on it.
> > >> > > >
> > >> > > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> > >> > > >
> > >> > >
> > >> > >
> > >> > >
> > >> >
> > >>
> > >>
> > >>
> > >
> > >
> >
>
Quote this message in a reply
12-09-2009, 07:15
Post: #9
SteveQ
Unregistered
 		 
Heater part
Ron

I did not read your original post close enough. This control is on an electric
heater in your coach not the hot water system, right?

I replaced mine on the hot water system, sorry not familiar with the electric
heater. The part that I used was one of the Snap Disc Fan Controls in the
middle of the page.

Steve Quandt
1993 PT 40
Iron Mountain, MI


--- In WanderlodgeForum@yahoogroups.com, "ronmarabito2002"
wrote:
>
> Is this switch controlling the fan or the heat strip? I am not getting heat.
The fan runs all the time. Your source shows 3 different types of controls,
which is the correct type unit?
>
> R.E. (Ron) Marabito, Dallas, TX 92WB40
>
> --- In WanderlodgeForum@yahoogroups.com, "SteveQ" wrote:
> >
> > Ron
> >
> > They should be White Rodgers parts, look here at the snap disc fan controls.
> > http://www.whiterodgers.com/wrdhom/commo...ace_12.htm
> >
> > I think the one that I used was cut in at 110 and cut out at 90.
> >
> > Steve Quandt
> > 1993 PT-40
> > Iron Mountain, Mi
> >
> >
> >
> > --- In WanderlodgeForum@yahoogroups.com, Curt Sprenger
wrote:
> > >
> > > Ron,
> > > Another source...Fenwal
> > >
> > >
http://www.fenwalcontrols.com/utcfs/Temp...Id%3D\
1023%26siteId%3D375,00.html
> > >
> > > Give them a call. Inform them what you have. My guess is they will know
what
> > > you need.
> > >
> > > Curt Sprenger
> > > 1987 PT38 8V92 "MacAttack Racing"
> > > Anaheim Hills, CA
> > >
> > >
> > >
> > > On Wed, Dec 9, 2009 at 9:28 AM, Curt Sprenger wrote:
> > >
> > > > Correct size? Do you have the heater manual? It might have that
> > > > information., or direct you to a source to get the information.
> > > >
> > > >
> > > > Curt Sprenger
> > > > 1987 PT38 8V92 "MacAttack Racing"
> > > > Anaheim Hills, CA
> > > >
> > > >
> > > >
> > > > On Wed, Dec 9, 2009 at 9:21 AM, ronmarabito2002 wrote:
> > > >
> > > >>
> > > >>
> > > >> Yes Curt. How do we determine the correct size?
> > > >>
> > > >>
> > > >> R.E. (Ron) Marabito, Dallas, TX 92WB40
> > > >>
> > > >> --- In
WanderlodgeForum@yahoogroups.com,
> > > >> Curt Sprenger wrote:
> > > >> >
> > > >> > Ron,
> > > >> >
> > > >> > Look like this?
> > > >> >
> > > >> > http://www.thermodisc.com/productdetail.asp?ProductID=1
> > > >> >
> > > >> > the site has lots of them.
> > > >> >
> > > >> >
> > > >> > Curt Sprenger
> > > >> > 1987 PT38 8V92 "MacAttack Racing"
> > > >> > Anaheim Hills, CA
> > > >> >
> > > >> >
> > > >> >
> > > >> > On Wed, Dec 9, 2009 at 9:07 AM, ronmarabito2002 wrote:
> > > >> >
> > > >> > >
> > > >> > >
> > > >> > > Studying this closer, it is probably a heat sensor or thermocouple.
> > > >> > >
> > > >> > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> > > >> > >
> > > >> > > --- In
WanderlodgeForum@yahoogroups.com
> > > >> ,
> > > >>
> > > >> > > "ronmarabito2002" wrote:
> > > >> > > >
> > > >> > > > Hi all: Does anyone have a source for the round disc resistor or
> > > >> > > capacitor that mounts in the top of the Bathroom Electric Heater
for a
> > > >> > > 92WB40. Mine has disintegrated and can't get heat.
> > > >> > > >
> > > >> > > > It has TOD 1-B1-B stamped on it.
> > > >> > > >
> > > >> > > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> > > >> > > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> >
> > > >>
> > > >>
> > > >>
> > > >
> > > >
> > >
> >
>
Quote this message in a reply
12-09-2009, 07:42
Post: #10
ronmarabito2002
Unregistered
 		 
Heater part
That's quite all right. Thanks for the help.

The heater is a Cadet Model no. TK-101 and is 1000 watts.

R.E. (Ron) Marabito, Dallas, TX 92WB40

--- In WanderlodgeForum@yahoogroups.com, "SteveQ" wrote:
>
> Ron
>
> I did not read your original post close enough. This control is on an
electric heater in your coach not the hot water system, right?
>
> I replaced mine on the hot water system, sorry not familiar with the electric
heater. The part that I used was one of the Snap Disc Fan Controls in the
middle of the page.
>
> Steve Quandt
> 1993 PT 40
> Iron Mountain, MI
>
>
> --- In WanderlodgeForum@yahoogroups.com, "ronmarabito2002"
wrote:
> >
> > Is this switch controlling the fan or the heat strip? I am not getting
heat. The fan runs all the time. Your source shows 3 different types of
controls, which is the correct type unit?
> >
> > R.E. (Ron) Marabito, Dallas, TX 92WB40
> >
> > --- In WanderlodgeForum@yahoogroups.com, "SteveQ" wrote:
> > >
> > > Ron
> > >
> > > They should be White Rodgers parts, look here at the snap disc fan
controls.
> > > http://www.whiterodgers.com/wrdhom/commo...ace_12.htm
> > >
> > > I think the one that I used was cut in at 110 and cut out at 90.
> > >
> > > Steve Quandt
> > > 1993 PT-40
> > > Iron Mountain, Mi
> > >
> > >
> > >
> > > --- In WanderlodgeForum@yahoogroups.com, Curt Sprenger
wrote:
> > > >
> > > > Ron,
> > > > Another source...Fenwal
> > > >
> > > >
http://www.fenwalcontrols.com/utcfs/Temp...Id%3D\
1023%26siteId%3D375,00.html
> > > >
> > > > Give them a call. Inform them what you have. My guess is they will know
what
> > > > you need.
> > > >
> > > > Curt Sprenger
> > > > 1987 PT38 8V92 "MacAttack Racing"
> > > > Anaheim Hills, CA
> > > >
> > > >
> > > >
> > > > On Wed, Dec 9, 2009 at 9:28 AM, Curt Sprenger wrote:
> > > >
> > > > > Correct size? Do you have the heater manual? It might have that
> > > > > information., or direct you to a source to get the information.
> > > > >
> > > > >
> > > > > Curt Sprenger
> > > > > 1987 PT38 8V92 "MacAttack Racing"
> > > > > Anaheim Hills, CA
> > > > >
> > > > >
> > > > >
> > > > > On Wed, Dec 9, 2009 at 9:21 AM, ronmarabito2002 wrote:
> > > > >
> > > > >>
> > > > >>
> > > > >> Yes Curt. How do we determine the correct size?
> > > > >>
> > > > >>
> > > > >> R.E. (Ron) Marabito, Dallas, TX 92WB40
> > > > >>
> > > > >> --- In
WanderlodgeForum@yahoogroups.com,
> > > > >> Curt Sprenger wrote:
> > > > >> >
> > > > >> > Ron,
> > > > >> >
> > > > >> > Look like this?
> > > > >> >
> > > > >> > http://www.thermodisc.com/productdetail.asp?ProductID=1
> > > > >> >
> > > > >> > the site has lots of them.
> > > > >> >
> > > > >> >
> > > > >> > Curt Sprenger
> > > > >> > 1987 PT38 8V92 "MacAttack Racing"
> > > > >> > Anaheim Hills, CA
> > > > >> >
> > > > >> >
> > > > >> >
> > > > >> > On Wed, Dec 9, 2009 at 9:07 AM, ronmarabito2002
wrote:
> > > > >> >
> > > > >> > >
> > > > >> > >
> > > > >> > > Studying this closer, it is probably a heat sensor or
thermocouple.
> > > > >> > >
> > > > >> > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> > > > >> > >
> > > > >> > > --- In
WanderlodgeForum@yahoogroups.com
> > > > >> ,
> > > > >>
> > > > >> > > "ronmarabito2002" wrote:
> > > > >> > > >
> > > > >> > > > Hi all: Does anyone have a source for the round disc resistor
or
> > > > >> > > capacitor that mounts in the top of the Bathroom Electric Heater
for a
> > > > >> > > 92WB40. Mine has disintegrated and can't get heat.
> > > > >> > > >
> > > > >> > > > It has TOD 1-B1-B stamped on it.
> > > > >> > > >
> > > > >> > > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> > > > >> > > >
> > > > >> > >
> > > > >> > >
> > > > >> > >
> > > > >> >
> > > > >>
> > > > >>
> > > > >>
> > > > >
> > > > >
> > > >
> > >
> >
>
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)

Contact Us | Wanderlodge Gurus - Free Classifieds & Support Forum Community Service | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication