Bathroom electricity heater

[g_man1146]

If you find the reset button tripped and the heater works after a
reset, be sure to find out why it tripped. The newer models have an
internal reset that forces one to open the heater to reset it. This
usually leads to observing the cause of the tripping; a buildup of
dust and lint inside the heater. Constant resetting without
eliminating the cause can be a fire hazard.
My heaters were recalled and changed to identical units with a reset
that is not accessible from the exterior for the reason stated
above.
Rich D. '99LXi43' CT


--- In WanderlodgeForum@yahoogroups.com, "Jeff Miller"
wrote:
>
> Don't pull the heater yet. As Ralph mentioned, there is a reset
> button, you'll need to poke a small screwdriver through the reset-
> button hole in the front panel.
>
> - Jeff Miller
> in Holland, MI
>
>
> --- In WanderlodgeForum@yahoogroups.com, "Ralph L. Fullenwider"
> wrote:
> >
> > Bob, depending on what is wrong with the heater, there is a
reset
> on the
> > back I believe.
> >
> > Ralph
> >
> > At 06:33 PM 3/29/2006 +0000, you wrote:
> > >My electricity heater in the bath room nolonger works.Iam
looking
> for
> > >a replacmrnt.Does any boady know where i could get one for a
1985
> > >PT.
> > > Bob Loomas 1985 PT 36
> > >
> > >
> > >
> > >
> > >
> > >
> >
> > Safe travels,
> >
> > Ralph and Charolette Fullenwider
> > Ralph's RV Solutions, Duncan, Oklahoma
> > http://home.swbell.net/rlf47/index.htm
> >
>