Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Filter Minders for Dummies
03-20-2013, 18:47 (This post was last modified: 03-20-2013 19:16 by davidbrady.)
Post: #2
RE: Filter Minders for Dummies
Here's an idea. Don't 1/8" NPT tap mount the Filter Minder directly into the 7" diameter intake plenum. Instead take a length of 1/4" diameter hose, maybe 10 feet long, you can coil it up, and mount the Filter Minder to this and connect the other end to the intake plenum 1/8" NPT bung. This way you'll filter out transients and be left with steady state readings. You may need to experiment with the length of tubing required. Then go for a full throttle drive, at high rpm, at full load, up a nice long grade. (Folks, save your money).

david brady,
'02 Wanderlodge LXi 'Smokey' (Sold),
'04 Prevost H3 Vantare 'SpongeBob'

"I don't like being wrong, but I really hate being right"
Find all posts by this user
Like Post Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Filter Minders for Dummies - davidbrady - 03-20-2013 18:47



User(s) browsing this thread: 6 Guest(s)