Differential oil level SP36

[williamcharrison]

Thanks Mike.

--- In WanderlodgeForum@yahoogroups.com, "Mike Hohnstein"
<MHOHNSTEIN@...> wrote:
>
> That's the pinion gear preload. It wouldn't be good to disturb
> that setting. The road side of the carrier should have a 1/2" npt
plug a little below the pinion center line, your lube should be with
in 1/2 inch of that opening, coach sitting on a level surface.
> Mike Hohnstein
> ----- Original Message -----
> From: williamcharrison
> To: WanderlodgeForum@yahoogroups.com
> Sent: Tuesday, April 18, 2006 8:33 AM
> Subject: [WanderlodgeForum] Differential oil level SP36
>
>
> Just completed a lube job on my 90 SP36 and noted only one
place
> on the differential having what looked like an inspection plug.
> It appears to be a slotted end shaft with a locknut on it. Is
this
> where the oil level is checked? If so, what should the level be
> and is there any guidelines for how far the slotted shaft should
be
> screwed back in?
>
> Chuck Harrison
> 90 SP36
> Akron, Ohio
>
>
>
>
>
> SPONSORED LINKS Recreational vehicles Wanderlodge Automotive
maintenance
> Recreational vehicle dealer Used recreational vehicles
Automotive radiators
>
>
> -------------------------------------------------------------------
-----------
> YAHOO! GROUPS LINKS
>
> a.. Visit your group "WanderlodgeForum" on the web.
>
> b.. To unsubscribe from this group, send an email to:
> WanderlodgeForum-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms
of Service.
>
>
> -------------------------------------------------------------------
-----------
>
>
>
> [Non-text portions of this message have been removed]
>