Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Parts quest
04-19-2006, 11:46
Post: #3
Parts quest
Hi Eric:

Yes your cylinder would work nicely. Under the Coach battery tray on the
back side of it, there are 3 sheet metal screws then 5 bolts with nuts that
forms the cruise control enclosure. You would need to locate the in coming
air source and place a plug in the original fitting. This also stops any
future air leaks in that area. I believe there is one electrical plug and
two bolts that holds the main body of the cylinder to the back plate. The
front of the hooded cable system will un screw from the cylinder and stay
there, and it is out. The plug that you need would be either a 1/4 inch or
3/8 can't remember for sure. I got mine at ACE hardware.

How much do you want for it, money wise? Of course I will pay shipping costs.

I do thank you for the offer of it if it is not too much trouble. A fellow
Birder with an '85 pt needs it. And, no, though I am in the business, I am
not charging for the cylinder, just doing a favor.

The black control box and dual valves on top of it are precious as well.

Safe travels,

Ralph

At 11:15 PM 4/19/2006 +0000, you wrote:
>Hi Ralph,
>I've got most of my old Bendix cruise system still on my coach, including
>the actuator
>cylinder for speed control. Not using it anymore since moving on to
>Kingcruise control
>system. Would my part work for you? How big a job to get it out?
>
>Eric in San Antonio
>84FC35SB
>
>--- In WanderlodgeForum@yahoogroups.com, "Ralph L. Fullenwider"
> wrote:
> >
> > Hi everyone:
> >
> > Spring is shaping up for some nice trips this year. Hope everyone's
> > preventative maintenance is caught up. Be sure to add, removal of the A/C
> > shrouds and washing out the condenser and straightening the fins up there,
> > to your spring list.
> >
> > I am in search of a Bendix CC-5 cylinder off the cruise control. Anyone
> > have one laying around in the shop anywhere? They are an obsolete part but
> > thought that some, who have up graded from the Bendix system, might have
> > the old stuff in a box.
> >
> > Thanks all,
> >
> > Safe travels,
> >
> > Ralph and Charolette Fullenwider
> > Ralph's RV Solutions, Duncan, Oklahoma
> > http://home.swbell.net/rlf47/index.htm
> >
>
>
>
Quote this message in a reply
Post Reply 


Messages In This Thread
Parts quest - Ralph L. Fullenwider - 04-19-2006, 10:51
Parts quest - esjmaj@... - 04-19-2006, 11:15
Parts quest - Ralph L. Fullenwider - 04-19-2006 11:46
Parts quest - George Lowry - 04-19-2006, 15:01
Parts quest - Ralph L. Fullenwider - 04-19-2006, 15:12



User(s) browsing this thread: 3 Guest(s)