Do Not Shift light

[krminyl@...]

Rick and Terri,

This has happened a few times with my BB too. Always while driving, and when
trying to upshift from 1st to 2nd. There is some kind of microprocessor with
the Allison trans, and my handbook says to turn the motor off, removing power
from the trans computer, and re-starting which allows it to "re-boot", for the
lack of a better term. Each time this happened to my BB, the problem corrected
itself after turning the bus off, waiting a minute or so, and restarting. If
the problem persists, I recommend it being looked at by an Allison repair
shop....they might be able to read the codes from the blinking light below the
shift buttons.

Good luck...

Kevin McKeown
Yorba Linda, CA
1986 38' PT

-----Original Message-----
From: trautoranch
To: WanderlodgeForum@yahoogroups.com
Sent: Thu, 20 Apr 2006 03:32:03 -0000
Subject: [WanderlodgeForum] Do Not Shift light


She started just great then noticed "Do Not Shift" light was on, on the
shift selector. Never seen that light before. Looked in the blue book
and found no reference. Checked all the fluids and jacks, but found no
problem. Has anyone had this problem before? Would appreciate any
input. We were about to pull out for the Lone Star BB rally.

Rick & Terri McIntire
1986 PT38 8V92
Patillo,
TX
Please Help!






Yahoo! Groups Links






[Non-text portions of this message have been removed]