Onan 8.0 89sp glow plugs-how can you tell if good?

[Gary Miller]

Ed,

Are you holding the switch to the 'stop' position to activate the glow
plugs and fuel pump before going to the 'start' position?

If not, I believe this is the proper technique. I normally count to
between ten and twenty while holding the switch, depending on
conditions.

Gary Miller
83 FC 33 - Powertech 7.0 diesel
Milwaukee area

--- In WanderlodgeForum@yahoogroups.com, "ED GARDELS"
wrote:
>
> I have to crank my gen set a long time before it starts firing and
> then it sputters a while before it finnaly runs smooth. I just read
a
> post recentily that a glow plun can be bad and cause this problem.
How
> can you check them to see if they are bad? With a meter? Do you have
> to pull them out?
> Thanks in advance for any help-- Im still working on the ideas
from
> the forum on my telescoping , or non-telescoping steering wheel
> Ed 89sp
> Arlington Texas
>