Generator related questions

[krminyl@...]

Hi Kerry,

It may sound elementary, but the breakers are deceiving...flip the breakers
to "off", then to "on" again. When tripped, it's kind of hard to tell
visually if they are tripped. Also, are your overhead toggle switches turned
to
the "on" position (on my PT they are overhead and on the left side of the
driver's head...one toggle switch for each roof air/floor level 110V heater).
These switches control the 110V AC heaters located down near the floor, and the
110V AC roof air conditioners. Make sure only the roof air or floor heaters
are turned on, not both at the same time. If the roof airs still don't work
(toggle switch "on", selector switch on the roof air set to "cool",
shore/gen switch sen to GEN), see if the 110V heaters turn on...if they do,
than will
narrow down your troubleshooting to the roof airs. Like with most system
issues with BB, it's usually something simple.

Good luck,

Kevin McKeown
Yorba Linda, CA
86 38PT


[Non-text portions of this message have been removed]