Levelers Died

[fwernlein]

Scott, you seem to have done the basics, you might try to loosen the
pump motor housing, wiggle it to make better electrical contact, and
then retighten the mounting bolts. I had intermittent problems and
traced it to a bad ground, the ground path is on my 85 the actual
motor housing...a little loose, and some dirt prevented a good
ground.

One more suggestion...have a helper move levers and you listen at
the unit...you might hear something that gives you a clue. And then
try same with a voltage check at the relay contacts near the motor.

Frank
85FC33


--- In WanderlodgeForum@yahoogroups.com, "Scott Forman"
<sforman@...> wrote:
>
> Help!
>
> The levelers on my 82 FC have died. When I turn the dash switch
on,
> the indicator lights work correctly, but when I activate the
levers to
> lower the jacks, nothing happens. No noise, no flicker of the
voltage
> gauge like I used to see when the pump was running, nothing. The
pump
> has plenty of oil and I have recently cleaned all electrical
> connections.
>
> Any ideas?
>
> Scott Forman
> 82 FC35RB
> Memphis
>