Perkins 12KW generator starting hard

[davidkerryedwards]

Yes. There are two sensors on the forward side of the block. One is
the oil pressure sender switch and one is the low oil pressure cut off
switch. The low pressure switch is wired in tandem with the high
temperature shut off sensor at the top inboard side of the head.

Kerry
82 FC 35
Denver
--- In WanderlodgeForum@yahoogroups.com, "ttikalsky"
wrote:
>
> When starting the generator it fires instantly but dies. If I hold the
> starter on for a couple seconds after the generator has started it
> will stay running. Is there a shutdown delay on these so the oil
> pressare can build up? If so where would it be and what does it look
> like?
>
>
> Troy
> 1986 Newell
>