Air Leak help

[Gregory OConnor]

Simple? If you don't have to order the part.
Gregory O'Connor
94 pt thingy
Romoland CA

In WanderlodgeForum@yahoogroups.com, Curt Sprenger
wrote:
>
> Steve,
> I'll assume the leak is at the black plastic where it goes into the
> white thingy. Try this...push the white thingy in and at the same
time
> pull out the black plastic line. Cut off a short piece of the black
> line, 1/2". Push the line back in where it came from. If that does
not
> work, buy the brass/white thingy coupler and replace the bad one.
Simple
> job.
>

>