Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
External Flushing Radiator Fins 8V92
06-13-2006, 14:13
Post: #13
External Flushing Radiator Fins 8V92
Rob,
Yes, the generator radiator at a minimum will be pressure tested, rodded
out, and tested again. I have it tested at 20 pounds. If it holds that
pressure it's good to go for me. I'm not the expert but it looks like
that should take care of it. If the core and or tank(s) need to be new
I'll do it. Actually, if new doesn't cost too much I may just do that.

Can you get to your generator radiator to clean it without removing it?
On ours, the radiator lays down, one could slide a shield over the top
or the radiator, remove the lower air deflection panel, and spray Gunk
or what ever up from the bottom. Then remove that shield and wash it
down through the fan section. You wouldn't get a lot of water pressure
going through there but it would flush it out.

Curt Sprenger 1987 PT38, Anaheim Hills, Calif.



Rob Robinson wrote:

> Thanks Curt. I assume you are taking your radiator in for more than just a
> fin cleaning. I would just like to clean mine in place with a hose and
> some
> product that helps release any foreign crap.
>
> On 13/06/06, Curt Sprenger > > wrote:
> >
> > Rob,
> > Gunk and other products are most likely available that will work. I'm
> > taking the generator radiator to the shop tomorrow. I'll ask what they
> > recommend. He's a friend. Maybe he'll have some good stuff to use. Got
> > the fan, radiator, and all the hoses removed today. About a two hour job
> > and not as bad as I anticipated. Bluebird builders do not leave a lot of
> > room to get that stuff out of the bay.
> >
> >
> > Curt Sprenger 1987 PT38, Anaheim Hills, Calif.
> >
> > Rob Robinson wrote:
> >
> > > Curt just a thought but what do you think of using Gunk to presoak the
> > > radiator before using a garden hose with hot water? Would Gunk be
> > harmful?
> > >
> > > On 13/06/06, Curt Sprenger >
> > > > wrote:
> > > >
> > > > Kevin,
> > > >
> > > > I'll take advantage of your offer for sure. Thank you! I've received
> > > > some great input re. cleaning radiators. I'll bring the fixins to
> > clean
> > > > it. I'll remove the grill here at home.
> > > >
> > > > Is there a good day this week or next week, or the week after.
> I'm not
> > > > in a hurry, just need to get it done.
> > > >
> > > >
> > > > Curt Sprenger 1987 PT38, Anaheim Hills, Calif.
> > > >
> > > > krminyl@...
>
> > 40aol.com> wrote:
> > > >
> > > > > Curt,
> > > > >
> > > > > East or West...doesn't matter. East is easier...it should
> shift into
> > > > 2nd.
> > > > > Coming up West, well, that's another issue. It's kind of fun
> > "smoking
> > > > > out"
> > > > > the wildlife as you chug up the hill.
> > > > >
> > > > > The offer is there, if you want to take advantage of it someday!
> > > > >
> > > > > Kevin Mc
> > > > > YL CA
> > > > > 86 38PT
> > > > >
> > > > >
> > > > >
> > > > > [Non-text portions of this message have been removed]
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > >
> > > --
> > > Rob, Sue & Merlin Robinson
> > > 94 WLWB
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> >
> >
> >
>
> --
> Rob, Sue & Merlin Robinson
> 94 WLWB
>
> [Non-text portions of this message have been removed]
>
>
Quote this message in a reply
Post Reply 


Messages In This Thread
External Flushing Radiator Fins 8V92 - Curt Sprenger - 06-12-2006, 07:47
External Flushing Radiator Fins 8V92 - orbitalsolutions - 06-12-2006, 08:41
External Flushing Radiator Fins 8V92 - krminyl@... - 06-12-2006, 23:15
External Flushing Radiator Fins 8V92 - Howard O. Truitt - 06-13-2006, 01:07
External Flushing Radiator Fins 8V92 - Curt Sprenger - 06-13-2006, 01:49
External Flushing Radiator Fins 8V92 - Curt Sprenger - 06-13-2006, 04:26
External Flushing Radiator Fins 8V92 - krminyl@... - 06-13-2006, 05:31
External Flushing Radiator Fins 8V92 - krminyl@... - 06-13-2006, 11:25
External Flushing Radiator Fins 8V92 - Curt Sprenger - 06-13-2006, 12:41
External Flushing Radiator Fins 8V92 - Rob Robinson - 06-13-2006, 12:47
External Flushing Radiator Fins 8V92 - Curt Sprenger - 06-13-2006, 13:10
External Flushing Radiator Fins 8V92 - Rob Robinson - 06-13-2006, 13:35
External Flushing Radiator Fins 8V92 - Curt Sprenger - 06-13-2006 14:13
External Flushing Radiator Fins 8V92 - Rob Robinson - 06-13-2006, 14:34
External Flushing Radiator Fins 8V92 - Tom Warner - 06-13-2006, 16:42
External Flushing Radiator Fins 8V92 - pattypape - 06-14-2006, 01:40
External Flushing Radiator Fins 8V92 - Howard O. Truitt - 06-14-2006, 04:34
External Flushing Radiator Fins 8V92 - Richard Hayden - 06-14-2006, 14:06



User(s) browsing this thread: 4 Guest(s)